The Ship Model Forum

The Ship Modelers Source
It is currently Tue Apr 07, 2020 1:51 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Feb 06, 2020 4:57 am 
Offline

Joined: Thu Jan 26, 2017 8:30 am
Posts: 175
The main class for this ship is called the Buyan-klasse. It is a small ship, with the possibility for coastal bombardements with artillery and rockets, mainly used to guard the Russian coast. Thanks to it's shallow draft (2m and 2.5m for the upgraded Buyan-M) it has also the possibility to guard rivers and come to shallow coastal areas.

Image

Later (2010) this class was upgraded to the Buyan-M klasse, with better stealthproperties, vertical launchtubes for anti-ship missiles and subsequently became a lot larger (10m in length, 2m in width). There's also an exportversion called Tornado.

Image

Info about the Buyan-klasse:

                                           Buyan                                  Buyan-M

Displacement:                500t (520t full)                        949t (full)
length:                                   62m                                    75m
beam:                                    9.6m                                   11m
heigth:                                   6.57m                                 6.57m
draft:                                         2m                                   2.5m
Propulsion: 2 shaft CODAD, 4 x Zvezda M520, 14,584 shp (10,880 kW) and Kolomna Diesel, Pumpjet.
Speed:                            28kn (52km/h)                        26kn (48km/h)
range:                                   2800km                                4300km
complement:                            29-36                                    52
endurance:                             10days                                    10 days
Armament: 
                                                  1x 100mm A-190-01 navalgun
                                   2x 30mm AK-630 CIWS (close in weapon system)

                                 1x DP-65 grenadelauncher (55mm kaliber, 10 tubes)
                                                  2x 14.5mm KPV machinegun
    1x 40 launch tubes A-215 Grad-M rockets                        1x Pantsir-M CIWS
    1x 3M47 surface-air missiles (4 launchpositions)              2x 4 UKSK vertical cells for Kalibr or Onix misiles

                                                                                               2x 4 Komar surface to air missiles
   

The kit:
Image

Image

Image

Image

Image

Image

First dryfit of the main parts... looks promising (ahum)

nose aligned:

Image

some form errors:
Image

So bottom hull is wrong shape and too long...
Image

In the assembly guide, a plan is provided (luckily on scale, so the top hull looks spot on, lower hull should be aligned at the rear...
Image

So I've bitten the bullet and used the saw:
Image

dryfit:
Image

and glued:
Image

So the glue has to set for 24h, and then on with putty and sanding.
Image

Image

Image

there's some slight problem that keeps popping up, and I don't seem to get rid of it while sanding...

I couldn't find the regular 2-componentglue that I'm used to work with and I've tried a new glue
Image

Works like a charm, positionable for 5 minutes, dry after 1h and solid after 24h. No wires as with regular Pattex, high bonding strength.. one disadvantage... it keeps popping up from between the grooves of the several parts... even after sanding, cutting, etc till it feels smooth, 1 day later... they're back...

Image

Image


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 14, 2020 8:09 am 
Offline

Joined: Thu Jan 26, 2017 8:30 am
Posts: 175
Little progress, started adding details( though my building time isn't completely spent on my knees searching..., luckily )
Image

first the larger parts like the doors, then the smaller parts as the various boxes:
Image

Image

also took a start on he main mast, still a lot to be added, but first it needs to be straightened up a bit...:
Image

Image

 1 off the vertical antennas was lost (very fragile connection) and was replaced by a bit of copperwire....


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 16, 2020 9:29 pm 
Offline

Joined: Sat Sep 17, 2011 9:28 pm
Posts: 28
Looking good!


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 17, 2020 12:38 am 
Offline
User avatar

Joined: Sat Oct 05, 2013 1:32 pm
Posts: 165
Very neat kit! I wish someone would come out with some of the more modern USN patrol craft and minesweepers in large scales. Even 1/350 is too small for me on these smaller ships.


Report this post
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot], Vladi and 25 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group