The Ship Model Forum

Just caught up with this Blog. Beautiful work so far.....Cheers Mark

_________________
If I was your Wife I would poison your Tea
If I was your Husband I would drink it

Winston Churchill

So I could use a little help on understanding how the spanker sail was lashed and rigged to Victory's gaff booms. I understand the sail was lashed around the upper boom and lashed around the mizzen mast.. It does not look to be lashed to the lower boom but just an attachment through the lower booms end and tied to a cleat on the lower boom near the mast ?? Did the upper and lower booms have some movement port and starboard or were they fixed in place 90 degree's aft ?? Seems they should have some movement... The instructions are not a lot of help... I have been using Rigging Period Ships by Lannart Petersson as a guide in her running rigging.. His example is a Square rigged Frigate from the period... Any help is appreciated ..

I figured it out... It is not lashed to the lower boom..

Of course they have movement from port to starboard. They would be almost useless otherwise.

Example:


It's a more modern ship(built in 1937) but the principle remains the same.

@ Bill

much apologies-- I just caught up with this -- doh !!

as a sailor and sailmaker I really ought to have spotted and assisted!!

Yes===all the fore and and aft yards/ booms are articulated-

- ie they can rotate sideways as well as go up and down-- as per excellent photo example above
of Sagres --maybe my next project !

encs some images that may be of further assistance

note that all the square yards can also rotate about the fwd face of the mast via the braceing lines

HTH

_________________
....I buy them at three times the speed I build 'em.... will I live long enough to empty my stash...?
http://www.modelshipgallery.com/gallery ... index.html

IPMS UK SIG (special interest group) www.finewaterline.com

thanks for the info Jim... I have not had a lot of time this summer to work on her.... I have tied down the ships boats on the skids and added some of there handling tackle.. Just starting the head rail netting... Using a piece of typing paper for a template to cut the netting.... After this it will finally be time to start adding yard arms !

one of these days .... I'll try doing HMS Victoy in high quality like yours... great job on her Bill

Is that a torpedo that just missed her? Damn Frogs. lolol, Regards, Pete in RI

turned the first yardarms for the bowsprit... I will paint and rig foot ropes before attaching

Ive not had a lot of time this Summer to work on her... Working the ratlines and fore top sail and yard.. So far so good... The ratlines are a pain !

fore top sail and yard with kit parts next to them

She's looking great Bill!

Wonderful work Bill!

XXXDAn

_________________
To Victory and beyond ...
viewtopic.php?f=59&t=99050&start=60

See also our german forum for the age of Sail and History:
http://www.segelschiffsmodellbau.com

Finally done with the ratlines .. Im sure some enjoy doing ratlines... I assure you I am not one of them.. On to the fore top sail and yard !

She sure is a beauty =)

_________________
https://www.mars-project.org/
The Marintime Archeology Discovery Of The Century

Slava Ukraini

The end is in sight!

Only the square sails left, with associated spars and rigging?

yes.. I will add a crew as well... Spars are being turned on my mini lathe ..

fore main and top yards ..the plastic kit and the ones I fabricated with their studsail booms.

been busy with garden, yard, and painting and floors in house So I have not had a lot of time to work on her this summer ..Still we are plugging away.

done with the foremast and bowspit,, going to set her aside and work on revells small 1/570 scale Titanic for my daughter.. Ive never attempted to light up a model kit before..should be interesting !