1/72 USS Manila Bay (CVE) - 28OCT08

Post by **Dave Wooley** » Thu Nov 01, 2007 12:42 pm

Hi Jose Good progress. I'll be looking forward to more photos
Dave Wooley

Jimmy Conway · Post by **Jimmy Conway** » Tue Nov 06, 2007 8:54 pm

Jose Chaica wrote:Nobody comments ??? OK..I know I�m a sloooowwww builder, so I suppose you might all have lost interest in this thread....

.

Jose, your building is crossing overseas and reaching Brazil............ but I'm a silent watcher too..... your building is very nice, something to contemplate...... keep the progress coming, we all are with you........ as sometime I told Ron Horabin, my wife follows these threads, and please, do not disappoint a young lady!!!
Nice reagrds: Jimmy

p.s. poderiamos trocar umas palavrinhas em portugu�s..........muita gente no forum ia ficar com inveja,

Jimmy Conway · Post by **Jimmy Conway** » Tue Nov 06, 2007 9:09 pm

Jose Chaica wrote:Nobody comments ??? OK..I know I�m a sloooowwww builder, so I suppose you might all have lost interest in this thread....

.

Dear Jose: you are not slow, your building progress is normal............. ARH is the only "road-runner" for model building that I know............. your thread is very interesting, and be sure of this!

Nice regards from Brazil: Jimmy

ARH · Post by **ARH** » Wed Nov 07, 2007 5:29 pm

Jimmy Conway wrote:
Jose Chaica wrote:Nobody comments ??? OK..I know I�m a sloooowwww builder, so I suppose you might all have lost interest in this thread....

.
Dear Jose: you are not slow, your building progress is normal............. ARH is the only "road-runner" for model building that I know............. your thread is very interesting, and be sure of this!
Nice regards from Brazil: Jimmy

And this old road runner is slowing down, beep beep,

Nice build Jose, we are all looking in.

Jimmy Conway · Post by **Jimmy Conway** » Thu Nov 08, 2007 1:52 pm

ARH wrote:
Jimmy Conway wrote: Dear Jose: you are not slow, your building progress is normal............. ARH is the only "road-runner" for model building that I know............. your thread is very interesting, and be sure of this!
Nice regards from Brazil: Jimmy

And this old road runner is slowing down, beep beep,

Nice build Jose, we are all looking in.

............if the "normal" Jose isn't slowing down, why would "others" do???
......fomm, fomm to ARH.................

Jimmy Conway · Post by **Jimmy Conway** » Thu Nov 08, 2007 1:55 pm

Jose, any history of your building as I asked you by PM?
What were modifications you did from Gambier Bay? Or the ships were twins?

regards: Jimmy

Jose Chaica · Post by **Jose Chaica** » Fri Nov 09, 2007 10:35 am

Replied through a PM.

.

jep1210 · Post by **jep1210** » Fri Nov 09, 2007 2:40 pm

Glad to see your coming a long. I've been MIA for a while and just got caught up

Jimmy Conway · Post by **Jimmy Conway** » Fri Nov 09, 2007 9:53 pm

Jose Chaica wrote:Replied through a PM.

.

Ok Jose, nice to read that! Now I can understand the reason for so many P47s............. Better yet I wasn't at Saipan during the attack........

Jose Chaica · Post by **Jose Chaica** » Mon Nov 26, 2007 2:10 pm

Hull plating and island - 26 NOV 07

This time, I�m adding the hull plating details, which were quite visible in any CVE...I used 0,5mm, but next time I�ll have to use a much more thinner plastic, as the effect is overdone, in my oppinion. I guess I�ll have to sand them down a little...

Also, I made a couple more advances, on the island.

I hope you like it....

.

Post by **Dave Wooley** » Mon Nov 26, 2007 4:06 pm

Now that's a really fine piece of styrene work.
Dave Wooley

Avery Boyer · Post by **Avery Boyer** » Mon Nov 26, 2007 4:16 pm

Amazing work

Ship Model Gallery · Post by **MartinJQuinn** » Mon Nov 26, 2007 4:23 pm

Very nice...I like the hull plating. Once you prime and paint it, I think it will look just fine.

gtb -red · Post by **gtb -red** » Mon Nov 26, 2007 4:31 pm

wish i could build that big.

Sylvain Auger · Post by **Sylvain Auger** » Mon Nov 26, 2007 5:49 pm

Gorgeous work so far! I second Martin's statement about the hull plating. Once everything is painted and dull coated the effect will be lessened a bit and it will look just fine

Sleepwalker · Post by **Sleepwalker** » Mon Nov 26, 2007 7:13 pm

I really like it. Just a little sanding and painting will slightly decrease plating thickness. You can scribe also vertical lines at hangar deck plating (they were placed just opposite flight deck foundation girders. Note that ar the bow plating was reaching the bow deck.

Post by **ModelMonkey** » Mon Nov 26, 2007 7:24 pm

The plating looks good to my eye. I had a chance last spring to see USS North Carolina up close and was astonished to see just how prominent the plating was. See: http://www.warshipmodels.com/~users/Ste ... 003274.jpg

Reid · Post by **Reid** » Mon Nov 26, 2007 9:15 pm

True but that is on a BB not a CVE aka �Kaiser Coffins�

you here about IJN AP shells going through the whole ship without going BOOM!! Anyways I think they look nice too. On my corvette I just had fun painting the plates, but if you want to be accurate then... just a bit of sanding should do it!

Jose Chaica · Post by **Jose Chaica** » Tue Nov 27, 2007 1:28 am

Sleepwalker wrote:...You can scribe also vertical lines at hangar deck plating...

That�s something I still have to do, I know...

I couldn�t find any (decent) shell plating details or plans for any Casablanca CVE. Those that came with the AOTS book on the Gambier Bay are almost useless, in my idea. So, I had to use some "artistic license", coupled with some real CVE hull photos. One of the things that you�ll imediatelly notice, if comparing with other "heavier" warships, is that the plating is very thin, almost impossible to see. On the distance, you can only see "lines" across the entire hull, while on a battleship, you can easily see the different plates.
I still have to finish the propellers shaft housing and the bow, and then, I�ll start adding some paint....

Thanks for the comments...

.

Sleepwalker · Post by **Sleepwalker** » Tue Nov 27, 2007 3:18 am

That's true that it is lack of good plans and clear photos for Casablanca's. Researching this topic some time ago I have found some showing hull plating. Ok there are blurred and showing only some parts of the hulls. All of them were from Navsource of similar websites.
Regarding vertical plating of the hangar sides it was common practice in USN (I think). The same way was build Essex's CV'sa and CVL's (tou can see it at photos showing USS Cabot during scrapping). General practice that all above hangar deck (including flight deck) was build as huge superstructure. That's why there were plating on the sides of the hangar was different than on the hull below. Girders were giving good support for external plating and in fact there was no reason to introduce additional tons of steel. Girders placement you'll find in your copy of AOTS.
Try to find USS Thetis Bay showing her after post war rebuild, I remember one stern shoot where such vertical plating is barely visible.

The Ship Model Forum

1/72 USS Manila Bay (CVE) - 28OCT08

Yay