The Ship Model Forum

Bill
Unreal, a work of art .I like the Atlantic scheme on your A/C .Whats next ?

bill we are not worthy,beautiful job and done on a tight schedule.the project is sure to be a hit were it is displayed

Hello again all. Well, the project is now completed and crated up, ready for the flight to Chicago. It arrives at the Museum of Science and Industry on Thursday of this week. I will then uncrate it and set it up. Some parting photos here. Check out the display case the Museum had built to house the exhibit. Pretty cool. I'll have an update when I return.......wish me luck.....Stay Tuned.......More to come......

OUTSTANDING !!!!

Waterline format for large scale ....==> just so brings it all to life!!!




JB

Wow what a magnificent display case for a justifiably magnificent diorama .
Dave Wooley

Like Dave said, an awesome display case. But the models are even more awesome! Love that paint job, splendid work!

i agree the fellow modellers.
i would like to say about the rusting in the bow (very splendid).
the diorama in general is very well made and the water is fantastic.
both models are truly a piece of art
congratulations Mr Waldorf

Hi Bill
You must be very proud to know that your work will be on display long after we have all gone .It shows the world that you were on this planet and did something !

Well Bill, I have to agree with all the coments that have been posted. For me you are second to none, the quality of work you keep churning out gets better, power to your elbow my friend, looking forward to seing it displaded at the museum in its case.

Writing to all from Chicago. The exhibit arrived here OK, and is now in it's case and on display. Looks great, if I may say so. Will post more on my return. They have some very large sailing ship models here, look like builders models. Totally awesome. Plus the U505. Standing next to the sub, it's BIG! More so than you would think. More to come.....Stay Tuned...................Bill W.

Masterful work Bill, well done. A pure pleasure to look at.


Andrew

Hello again all Well, I have come to an end on another build. This will be the last post on the project. I'd like to thank all for the posts and following along. Sorry I did'nt get the time to do a more in-depth thread, but time constraints were heavy. In any event, both myself and the models arrived intact, a real relief! The Museum of Science and Industry is a huge place. I was there 3 days and did'nt see it all. The U-505 is something to see. If you have never been here, you should go, a cool place for adults and kids! I had a great time. So, without further rambling by me, lets take a look...... Ok, now on to the models....... Well, there it is.......What's next???? I don't know.Suggestions welcome. Thanks again for following along. Stay Tuned....More to Come..................

Well done Bill, its a credit to you.

Hi Bill You must be justifiably proud of your achievement. To have a model on permamant display at the Museum of Science and Industry is much like having a model on display at the Smithsonian. An accomplishment few modellers ever reach. Also the U-505 is quite spectacular including its amazing location. As for a follow on project how about one of the USNs former CGNs , Truxton perhaps ? Bill my friend which ever direction you go in I will be taking a keen interest for sure . Once again I take my hat of to you . You sir are not just an outstanding model maker , an inspiration to us all but also an fine ambassador for model ship building .
Dave Wooley

I want to congratulate you again Bill, looks to me you made history one more time



Jose

Bill---
You have once again done the 'impossible' at meeting a deadline with your excellent work---I know you were on 'pins and needles while waiting for the models to arrive in 'one piece' after the debacle of my replica Coast Guard 83' cutter's arrival at Dulles this past May---thankfully all went well and another of your fine jobs of showing a handmade replica where our modern day citizens, especially the youth, can visualize a portion of past history of our Nation----my best wishes for your continued success

cmomm44 wrote:Bill---
You have once again done the 'impossible' at meeting a deadline with your excellent work---I know you were on 'pins and needles while waiting for the models to arrive in 'one piece' after the debacle of my replica Coast Guard 83' cutter's arrival at Dulles this past May---thankfully all went well and another of your fine jobs of showing a handmade replica where our modern day citizens, especially the youth, can visualize a portion of past history of our Nation----my best wishes for your continued success

Thanks for the post. The debacle of your 83' cutter model was very much a tragic event. Most who follow along on these builds are not aware of what took place. The problem was twofold. First, in my haste to get the model to you, I did not lock it down good enough to the base. I did not anticipate a basketball game using the crate it was shipped in as the ball. Second, without mentioning any names, the shipment was flat out mishandled. It was supposed to get escorted from here in Florida to your reunion in Herndon, Va. Such was not the case. There is always risk in shipping completed models as they are very fragile, by nature. Here's some photos for all to look at. This is what happens when things go wrong............ As you can see, the damage was quite bad. You can imagine the frustration and anger of all involved here. But, in order to save the day, I spent 16 hours making repairs as best I could givin the circumstances, to present the replica to all at your reunion. Heres some photos of the repairs.......... Eventually the model came back here and I was able to make further repairs and fabricate a new plexiglass cover. So all is well that ends well, in spite of everything else. A harrowing experience, to say the least. Hope you are well comm44. We will talk soon. Thanks again for the post, as well as all of you folks.

Bill,again congrats! like your build so much that I am building a 1/350 CVA-19 Hancock during Nam. She will sail with a 1/350 CG-10 Albany. Again congrats!

Thanks Bill, for showing the folks just what can and does sometime occur when shipping your finished replica models to museums and other parties----in any event, you did a special job of putting things back together so I can show with pride one of the 'little guys' that served our country during WW2----while the cutter is shown in anti-sub armament, this particular unit also served at Juno Beach, Normandy during the invasion period as part of USCG Rescue Flotilla 1---the entire 60 cutter unit is credited with saving 1438 lives during the invasion time---my bias may show since I was one of the crewmen for 22 months but no other nation had a designated life saving group of ships working while fighting an all out war---Semper Paratus

Once Again........Thank-You for Your Service to our Country. It is men like you who make it all worthwhile.......................