The Ship Model Forum

Hi all,

Final Update: Finishing the 'Nawlins!


I rigged the model before adding the deck railings, weapons and other details to avoid snapping things off with the thread,I just can't say enough about the Caenis thread!...rigging used to be the most dreaded part of a model for me because it seemed the thread would always stick to everything but what I wanted it to. Since useing the Uni-Products thread rigging is a pc of cake!..I attach it to one point with CA, wait about 30 seconds then attach the other end...done!!!!!!!




Finaly it came time to add the railings, weapons, catapult and aircraft crane and with that the model is finished!...The only thing left to do is build the display case!





Dave

In an awaked moment of mine, -thats outstanding!!!!

That "done" must be an special good feeling? and placing the finished touch "under"
is just perfect.

WOW!

Hi Guys,
Dave,
"With intent and intensity, Dave finished New Orleans"
That's some of the best model work I''ve seen.
Clean, superb extra detail added, can't say enough.
Fantastic job!
Tony

Dave, your build of New Orleans is a real morning eye opener! No coffee required.



Bob Pink.

After looking at that ,I`m taking up Knitting!!Stupendous build!!Well done sir.

Looks like one sparkling jewel she is one of the most cleanest buildups i've seen around here Dave.


Jose

I'll second what Tony said. She is a beauty, Dave!!

Ohhh...here she is!!!...my appologies to the Mods ...thanks guys for the comments they are very much appreciated!!!...Although I didn't get to work on her as much as I wanted to I had alot of fun with this one...I plan to take more pics and send 'em in for the gallery soon!...Happy modeling everyone

Dave

We look forward to it Dave. Take lots of close ups so we can enjoy the fine detailing you added.

You�ve built an absolutely gorgeous model Dave.
Congratulations

Paul

Your "Show Boat" and New Orleans look fabulous!

Can't wait to see more of your skills unfold!



Nick

Hi all!

Finaly started this weekend building the display case for my model...I purchased a sheet of clear plexiglass and a pc of 1x4" White Oak. After determining the dimentions of the case I cut the Oak pcs on my table saw. On my router table I milled the slots and grooves needed for the clear plexi pcs. and the decorative edge detail on the top frame.





All the pcs dry-fitted...just some finish sanding needed.


Dave

Hi All!

After a final finish sanding it was time to put a finish on the case pcs...after staining the Oak and letting it dry overnight I applied 2 coats of semi-gloss Acrylic polyurathane...when the polyurathane dried it was time to cut the clear plexi pcs which were cut on my table saw...when the plexi pcs. were cut they were installed in the assembled case frame and glued in with slow set clear epoxy.


All the pcs. dry and ready for the polyurathane.


The plexi pcs. installed while the slow set epoxy cures.


Done!!!!!!!!!!

Dave

Man, how did I miss this build?! I remember seeing it when you started it but I somehow missed pages 2-8 Superb build sir, superb! This should be stickied as a scratch building tutorial in my opinion.

Hello Dave,
Just starting this build. Have wanted to build the NO Boat as my father flew aircraft of her in the Pacific.
Converting San Fran to NO as you did.
Would you mind if I contact you for some pointers if I get stuck.

BTW - the New Orleans reunion group was able to get her 17th star finally awarded after all these years. Unfortunately - it doesn't get much press being 60+ years past due.

Thanks so much and love your work!
Dave Mac

No problem!...I'd be happy to help if I can!


Dave

David two thumbs up to you . Your builds are so clean it looks like they are built out of this world. As a matter of fact, I used your build of Big Mami to build my Massachusetts. And i live Mass. Great work!

Hello Dave,
Ditto to last post - awesome build. Found you in the New Orleans class cruisers book - I was blown away.
The authors kept mentioning how you did this alone out in the "wilderness"....like that was an issue...haha! I think solitude can be one of the best ways to build!
Anyway - thanks so much for your offer of assistance. I have not done much scratch building and will need to do quite a bit, as you did, to convert the SanFran to the NO Boat. Your entries are very detailed - an terrific log of your build.
Golly - even the case is a work of art!!!
Take care and Happy Thanksgiving weekend...for the next few hours.
Dave Mac

Hi Dave,

Mr. Abby sent me an autographed copy of the book and I got quite a chuckle out of it...I may be wrong but I think the "alone" and "wilderness" refers to the fact I live approx. 125 miles north of Detroit in a small community of about 600 people. The nearest IPMS chapter is about than an hour away which I think he believed would make it difficult for me to interact with fellow modelers. Fortunately the Internet has shrunk the world and I learned very much from others on this and other forums that it's like having a IPMS chapter next door.

Thank you for your comments and if needed I have the areas required for the NO conversion reduced from 1/192 drawings to 1/350 scale.

Dave