*Inj. molded plastic* Upcoming Ship Kit Releases
Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot
-
burtus05
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Flyhawk seems to be re-releasing the HMS Naiad in a limited version, it can be seen on the Chinese part of their homepage. I hope the re-release does not distract any time/resorces from the British destroyers they are planing to release.
-
pgollin
- Posts: 444
- Joined: Mon Jan 26, 2015 5:35 am
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
.
This is the page (I hope) ;
http://www.flyhawkmodel.com/html/banner ... /1853.html
It would SEEM to be a full hull version ???????
.
This is the page (I hope) ;
http://www.flyhawkmodel.com/html/banner ... /1853.html
It would SEEM to be a full hull version ???????
.
-
rotley
- Posts: 235
- Joined: Sat Feb 23, 2013 7:18 pm
- Location: Sydney, Australia
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The Trumpeter&HobbyBoss facebook page has the 1/350 German Navy Aircraft Carrier DKM Graf Zeppelin and 1/350 French Navy Pre-Dreadnought Battleship Voltaire listed for December 2016 release. 
- Quaestor
- Posts: 1324
- Joined: Fri Jun 07, 2013 11:41 am
- Location: CT, US of A
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Campbeltown (plus interesting reissues!) in 1/700th from Flyhawk, incoming:
http://www.1999.co.jp/eng/list/918/0/1

http://www.1999.co.jp/eng/list/918/0/1
Harold
- Hanchang Kuo
- Posts: 186
- Joined: Thu Jan 13, 2005 9:36 pm
- Location: Fremont, California
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Another 1/350 Graf Zeppelin from a new Chinese company Very Fire joins the fray. If this trend continues we might actually see a 1/350 injection Schlachtschiff H in the future 
http://tieba.baidu.com/p/4876689148?pn=1
http://tieba.baidu.com/p/4844212398?pid ... 9766038537
http://tieba.baidu.com/p/4876689148?pn=1
http://tieba.baidu.com/p/4844212398?pid ... 9766038537
UN-altered REPRODUCTION and DISSEMINATION of this IMPORTANT Information is ENCOURAGED, ESPECIALLY to COMPUTER BULLETIN BOARDS.
- Steve
- Posts: 782
- Joined: Wed Jun 27, 2007 11:59 am
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Can anyone post the new Trumpeter catalog section for ships? A partial post for armor only has shown up on Face Book.
- Aop Aur
- Posts: 972
- Joined: Thu Jul 02, 2015 1:06 am
- Location: Bangkok, Thailand
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The screws are so good!!

Will the release of this spark more interests in never completed ship subjects? These are so awesome!
Aop

Will the release of this spark more interests in never completed ship subjects? These are so awesome!
Aop
On the way:
--1/350 Tamiya DKM Tirpitz Nov 1944
--1/350 scratch-build HMS Lion never built battleship (1938)
And our artworks!
--1/350 Tamiya DKM Tirpitz Nov 1944
--1/350 scratch-build HMS Lion never built battleship (1938)
And our artworks!
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Looks like Hobby boss is getting in on the act too http://www.hobbyeasy.com/en/data/sqks7j ... 1480497963
-
maxim
- Posts: 4006
- Joined: Tue Jun 14, 2005 6:23 am
- Location: Bonn
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Hmm, but Trumpeter and HobbyBoss are one company...
Anyway, I would prefer kits of real ships - not this fictitious stuff.
Anyway, I would prefer kits of real ships - not this fictitious stuff.
- Hugh Williams
- Posts: 937
- Joined: Sat Aug 19, 2006 2:11 pm
- Location: Derbyshire, U.K.
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Agreed, they might as well do Regia Marina's Aquila!maxim wrote:Hmm, but Trumpeter and HobbyBoss are one company...![]()
Anyway, I would prefer kits of real ships - not this fictitious stuff.
1-350 wishes:
RN Cruisers/Destroyers (WW2)
USN Cruisers/Destroyers (WW2 + post war)
RN Cruisers/Destroyers (WW2)
USN Cruisers/Destroyers (WW2 + post war)
- Strategos Augustus
- Posts: 537
- Joined: Sat Feb 08, 2014 1:58 pm
- Location: New Hampshire , United States
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Oh please yes, an Aquila!Hugh Williams wrote:Agreed, they might as well do Regia Marina's Aquila!maxim wrote:Hmm, but Trumpeter and HobbyBoss are one company...![]()
Anyway, I would prefer kits of real ships - not this fictitious stuff.

Si hortum in bibliotheca habes, nihil deerit.
- Consul Marcus Tullius Cicero
-
rotley
- Posts: 235
- Joined: Sat Feb 23, 2013 7:18 pm
- Location: Sydney, Australia
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I'm not sure you could call the Graf Zeppelin aircraft carrier 'fictitious'. It certainly existed although it never made it into active service but. according to some history, was about 95% completed before Hitler ordered a stop on further work.maxim wrote:
Anyway, I would prefer kits of real ships - not this fictitious stuff.
Likewise the Italian carrier Aquila was almost completed when Italy surrendered and the ship was seized by the Germans.
Both ships are a lot more 'real' than the USS Montana or the Lion class or the H class battleships.
-
maxim
- Posts: 4006
- Joined: Tue Jun 14, 2005 6:23 am
- Location: Bonn
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Yes, it was started, but it never appeared in the way Trumpeter or the other companies showing it. The kits does depict a fictitious completed ship in commission. And not as never completed hulk
Graf Zeppelin is a kind of Kriegsmarine 1946 - boring.
There are still plenty of ships, which were in service, for which no kits are available - not even in resin. E.g. HMS Enterprise...
There are still plenty of ships, which were in service, for which no kits are available - not even in resin. E.g. HMS Enterprise...
- grahamwalker
- Posts: 175
- Joined: Sat Jan 15, 2005 2:55 pm
- Location: Burton upon Trent UK
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I agree very boring what if, mind you they cant go wrong with it as it never went to Sea
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Well, someone could tool the Giuseppe Miraglia. That was a real ship, though a sea plane carrier, but of historical significance none the less.
-
maxim
- Posts: 4006
- Joined: Tue Jun 14, 2005 6:23 am
- Location: Bonn
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Ok, not in plastic, but if you would like to built that ship:
http://www.delphismodels.it/pages/e_det ... rodotto=12
There is also a R.N. Aquila kit:
http://www.delphismodels.it/pages/e_det ... rodotto=22
http://www.delphismodels.it/pages/e_det ... rodotto=12
There is also a R.N. Aquila kit:
http://www.delphismodels.it/pages/e_det ... rodotto=22
-
MatthewB
- Posts: 2269
- Joined: Wed Aug 05, 2015 9:25 am
- Location: Los Angeles and Houston
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Why does the Aquila look like it has the same weird Catapults that are on the Graf Zeppelin?
MB
MB
OMG LOOK! A signature
Working on:
1/700 (All Fall 1942):
HIJMS Nagara
HIJMS Aoba & Kinugasa
USS San Francisco
USS Helena
USS St. Louis
USS Laffey & Farenholt
HIJMS Sub-Chasers No. 4 - 7
HIJMS Sub-Chasers No. 13 - 16
Working on:
1/700 (All Fall 1942):
HIJMS Nagara
HIJMS Aoba & Kinugasa
USS San Francisco
USS Helena
USS St. Louis
USS Laffey & Farenholt
HIJMS Sub-Chasers No. 4 - 7
HIJMS Sub-Chasers No. 13 - 16
-
maxim
- Posts: 4006
- Joined: Tue Jun 14, 2005 6:23 am
- Location: Bonn
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Do you think that allied navies did not cooperate at all? 
-
ninjrk
- Posts: 106
- Joined: Sat Apr 16, 2005 7:07 am
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
If I'm remembering correctly, didn't the Graf Zeppelin's catapults get sent to Italy for the Aquila? No idea if they were ever actually installed.
And I would totally buy a 1/350 Aquila.
And I would totally buy a 1/350 Aquila.
- Littorio
- Posts: 82
- Joined: Fri Sep 19, 2014 8:49 am
- Location: UK South East
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The catapults were those intended for the Zeppelins sister ship 'Carrier B', so yes they are the same as the one on Zeppelin but not from Zeppelin and they were installed. Aquila had completed static tests and was due to start her under way tests, so I would say this is not a fictitious ship unlike Lion, Montana, H44 etc. Oh Aquila's arrester gear didn't work correctly in her static tests so needed reworking, ie as installed it couldn't catch the aircraft.ninjrk wrote:If I'm remembering correctly, didn't the Graf Zeppelin's catapults get sent to Italy for the Aquila? No idea if they were ever actually installed.
And I would totally buy a 1/350 Aquila.
Regarding the Zeppelin I'll get one but finish it as Marine 46' with Luft 46' aircraft.
On the slip - all 1/350
USS Fletcher - Tamiya w/GMM PE and L'Arsenal resin
USS Mackinac AVP-13 - ISW w/ AM parts from several sources
In the design office -
HMS Ariadne Conversion of WEM kit
USS Fletcher - Tamiya w/GMM PE and L'Arsenal resin
USS Mackinac AVP-13 - ISW w/ AM parts from several sources
In the design office -
HMS Ariadne Conversion of WEM kit
