*Inj. molded plastic* Upcoming Ship Kit Releases

Main forum for general questions

Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot

Post Reply
pgollin
Posts: 444
Joined: Mon Jan 26, 2015 5:35 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by pgollin »

Guest wrote:If not already mentioned Aoshima has the 700 scale HMS Victorious listed on Hobby Search for March. Shades of the old days when they also did the two sisters. The Illustrious is available for preorder on Hobby Search.
Yes, and just like the 1970s it looks like Victorious will be exactly the same as Illustrious !

I really hope that they do do SOME SORT of modifications for Victorious, but I doubt it.

.
User avatar
Timmy C
Posts: 12438
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

They use photos in the catalog during the early stages of development - once it's more complete, the artwork will be ready by then, and they switch to the artwork for the next year's catalog.

In short, if you see artwork being used, it's more likely to be released sooner rather than later.
De quoi s'agit-il?
rotley
Posts: 235
Joined: Sat Feb 23, 2013 7:18 pm
Location: Sydney, Australia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by rotley »

Timmy C wrote:They use photos in the catalog during the early stages of development - once it's more complete, the artwork will be ready by then, and they switch to the artwork for the next year's catalog.

In short, if you see artwork being used, it's more likely to be released sooner rather than later.

I shouldn't be holding my breath then for their 1/350 HMS Rodney then?
User avatar
Steve
Posts: 782
Joined: Wed Jun 27, 2007 11:59 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Steve »

pgollin wrote:
Guest wrote:If not already mentioned Aoshima has the 700 scale HMS Victorious listed on Hobby Search for March. Shades of the old days when they also did the two sisters. The Illustrious is available for preorder on Hobby Search.
Yes, and just like the 1970s it looks like Victorious will be exactly the same as Illustrious !

I really hope that they do do SOME SORT of modifications for Victorious, but I doubt it.

.
The 70's Victorious is exactly the same as the Illustrious except that Aoshima added 3 platforms for 12 20mm mounts (4 each). They are located P/S aft on the flight deck overhang (not under the ramp as shown on the box art) and one on the stbd. side of the island. Actual locations are best picked based on the box art since the instruction sheet is vague. I still love these old kits because they they were the first.
User avatar
Aop Aur
Posts: 972
Joined: Thu Jul 02, 2015 1:06 am
Location: Bangkok, Thailand

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Aop Aur »

So Zara is going to be released sooner than the other ones...
Great to see Exeter and York in the catalogue! The dream started to come true! :thumbs_up_1:

Aop
graham--walker

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by graham--walker »

Flyhawk has HMS Ajax, Achilles, HMS POW and DOY listed as coming soon
Rodger Cole
Posts: 11
Joined: Wed Sep 11, 2013 10:33 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Rodger Cole »

graham--walker wrote:Flyhawk has HMS Ajax, Achilles, HMS POW and DOY listed as coming soon
I'm guessing those are 1/700? I'm normally 1/350 but one dream of mine is doing all of the River Platte ships in a common scale. If it must be 1/700 then I'll just have to live with it.
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

graham--walker wrote:Flyhawk has HMS Ajax, Achilles, HMS POW and DOY listed as coming soon

Can You provide the link please
Last edited by Miguel on Thu Dec 29, 2016 11:03 am, edited 2 times in total.
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
User avatar
Steve
Posts: 782
Joined: Wed Jun 27, 2007 11:59 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Steve »

graham--walker wrote:Flyhawk has HMS Ajax, Achilles, HMS POW and DOY listed as coming soon
Not on their site yet.
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
User avatar
PetrolGator
Posts: 2353
Joined: Fri Jun 22, 2012 12:02 pm
Location: Herndon, VA

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by PetrolGator »

Boy. Moltke being announced means a Goeben (and more importantly, Yavuz) can't be far behind!
- Chris

1/700 Saratoga w/Pontos (Needs paint)
1/700 Potato w/Kurama (On hold)
1/700 Murdertorpedoboat Ooi
User avatar
Timmy C
Posts: 12438
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

PetrolGator wrote:Boy. Moltke being announced means a Goeben (and more importantly, Yavuz) can't be far behind!
Right? So stoked.

Now if only they'll commit to that Agincourt...
De quoi s'agit-il?
rotley
Posts: 235
Joined: Sat Feb 23, 2013 7:18 pm
Location: Sydney, Australia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by rotley »


Would love to see some of those in 1/350 scale. :thumbs_up_1:
rotley
Posts: 235
Joined: Sat Feb 23, 2013 7:18 pm
Location: Sydney, Australia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by rotley »

Trumpeter has posted their entire 2017 - 2018 catalogue on Facebook (the post has the longest URL I have ever seen :) ) but pages 62, 65 and 66 are missing. These pages happen to be right in the middle of the Ships section. Until I realised there were pages missing I thought some of their previously announced projects eg the 1/350 Nelson and Rodney had been dropped. :shock:

https://www.facebook.com/TrumpeterModel ... =3&theater

Ships start on page 57
User avatar
Timmy C
Posts: 12438
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

The ship section (including missing pages) was posted separately: https://www.facebook.com/TrumpeterModel ... 2384949024
De quoi s'agit-il?
User avatar
PaulC
Posts: 857
Joined: Sat Jun 14, 2008 9:27 am
Location: Kingston, Jamaica

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by PaulC »

graham--walker wrote:Flyhawk has HMS Ajax, Achilles,
Well then.....the extra turret in the Aurora kit was prophetic! :cool_1: :woo_hoo:
Hard a starboard.......Shoot!
User avatar
Quaestor
Posts: 1317
Joined: Fri Jun 07, 2013 11:41 am
Location: CT, US of A

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Quaestor »

New York + Texas :woo_hoo:
Harold
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

Finally Hobby Boss 1/350 WW I Lord Nelson will hit he market ,IMO by February on sale :woo_hoo: Image
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
User avatar
davidwaples
Posts: 773
Joined: Thu May 03, 2007 10:39 pm
Location: Westminster, Colorado
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by davidwaples »

Revell to release new tool 1/72 PT-109 kit later this year! I hope they get it right!!
Dave
Andi@Germany
Posts: 32
Joined: Tue May 17, 2016 7:44 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Andi@Germany »

davidwaples wrote:Revell to release new tool 1/72 PT-109 kit later this year! I hope they get it right!!
Dave

In five weeks we knew more if this a reissued or new tool kit. Hobbyshow in Nuremberg is held in the first week of February.
Post Reply

Return to “Main Forum”