Page 10 of 18
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Wed Jan 27, 2016 12:19 pm
by Angeliccypher
That is looking good Dan!
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Wed Jan 27, 2016 12:28 pm
by MartinJQuinn
Dan K wrote:I called it a night.
Good idea.
Kick ass work Dan. They look phenomenal.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Thu Jan 28, 2016 12:39 pm
by Dan K
Thank you.
I've recovered enough to proceed with the test coat of paint. For the most part, they look good to me. Just a couple of seams to fill, some holes to drill, some excess material to sand down, and some corners to build up. One thing that has become immediately apparent is that there are a lot of hard to paint areas that need to be coated prior to adding PE railings. Otherwise, the railings are going to get way too much paint.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Thu Jan 28, 2016 3:33 pm
by Lester Abbey
These tankers look great. Glad to see some progress - i was worried about your IJN fleet drifting around the Pacific having run out of fuel. Keep up the good work - you are an inspiration to all of us.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Thu Jan 28, 2016 10:29 pm
by J. Soca
They are coming along real nice
Jose

Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Fri Jan 29, 2016 1:47 pm
by blacman
Fantastic thread.... and great models growing up !!

Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sat Jan 30, 2016 3:58 am
by marijn van gils
Veeery sharp!
Cheers,
Marijn
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sat Jan 30, 2016 11:17 am
by Quincy
Dan, your bridges look fantastic!
Bob Pink.

Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sat Jan 30, 2016 8:47 pm
by Dan K
I do appreciate the encouragement, friends.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Fri Feb 19, 2016 11:49 am
by Dan K
Kenyo Maru�s bridge is now mostly complete, with about half the details that are to be included. Nothing else can be done until it�s permanently glued in, which can�t happen until after the hull and main deck railings are done. So, just for show here. I chose not to use the kit provided searchlight and assembly except for the trestle base. Upper railings are too thick, and the searchlight too unrefined. I used the far superior FineMolds piece. These are 90cm searchlights, the same as used on the first class DDs.
I'm going to try something new here with the photo posting, higher rez but smaller footprint files. Let me know if the pics enlarge properly to a good size. Thx.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Fri Feb 19, 2016 11:53 am
by Devin
Great work. Big difference in the searchlight platform and light. The pictures look nice.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sat Feb 20, 2016 10:28 pm
by J. Soca
That looks beautiful Dan, keep up the excellent attention to detail
Jose

Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sat Feb 20, 2016 10:40 pm
by Angeliccypher
Agreed... impressive
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sun Feb 21, 2016 1:03 pm
by Joe Simon
I got to tell you Dan these things look great!
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sun Feb 21, 2016 1:41 pm
by Dan K
Thx, guys. That means a lot to me.
As pointed out by many folks before, the tyranny of the digital camera is absolute. So many little flaws, almost impossible to correct. Of course, if I hadn't crushed the railings countless times. it would look better to begin with.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Sun Feb 21, 2016 5:23 pm
by gscott
Dan, your dedication to getting every detail right is inspiring (and frightening)! Keep up the great work. I always look forward to your "works in progress" builds.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Mon Feb 22, 2016 5:38 pm
by Quincy
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Tue Feb 23, 2016 4:08 am
by marijn van gils
Dan K wrote:Of course, if I hadn't crushed the railings countless times. it would look better to begin with.
They look pretty good to me though!
And wouldn't the real railings have been a bit beaten up too?
Excellent work! Indeed a big improvement with the searchlight.
Cheers,
Marijn
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Tue Feb 23, 2016 2:03 pm
by Dan K
Everyone's encouragement is really appreciated. Keeps me going on this.
And wouldn't the real railings have been a bit beaten up too?

If we could factor in a rogue wave or two, than, yes, I could go with that.
Kyokuto Maru's bridge almost done. I may add a bit more detail to both bridges at this stage then I originally intended, as I can see how to go about it without screwing up. Of course, the actual execution may falter a bit.
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Posted: Wed Feb 24, 2016 12:29 pm
by J.F.S.
Dan,
Keep up the good work!
Joe