Page 10 of 11
Re: Tin Can (DD/DE) Group Build!
Posted: Sun Oct 03, 2010 6:27 pm
by Quincy
I'll try to send in my photo's either tonite or tomorrow. I just got back with my wife from Minnesota. I'm exhausted!
Bob Pink.
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Oct 05, 2010 5:08 pm
by Quincy
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Oct 05, 2010 7:11 pm
by Cliffy B
I know the deadline's past but I finished adding the finishing touches onto my AAW DE so I thought I'd share with the group.
Added the last of the PE, guns, directors, and painting touch-ups. The PE Oerlikons were a royal pain in the rear so I decided to just cut the main gun assembly off the brass sheet and attach them to the kit supplied bases/shields. I thinned the plastic shields down considerably as well. I think the effect is pretty decent given the scale. The whole ship is only 5" long

The whaleboat will be hanging over the side so I don't want to add it until I finish the water base and get all the ships mounted. I've already knocked some pieces off while handling this one and I know the boat won't fair well given my track record so far
Enjoy!
-Mike
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Oct 05, 2010 10:21 pm
by Quincy
Nice job Cliffy!
Bob Pink.

Re: Tin Can (DD/DE) Group Build!
Posted: Wed Oct 06, 2010 4:22 pm
by Sr. Gopher
Yep, really Nice!!
PS, are you going to post your progress on the CVE and ASW DE somewhere also?
Re: Tin Can (DD/DE) Group Build!
Posted: Thu Oct 07, 2010 11:04 am
by drdoom1337
Thus far, I have only received 3 submissions. I know far more people have built kits! I ask please send all submissions to my email or as a message (jds560 at gmail.com) so the judging process can go as swiftly as possible!

Re: Tin Can (DD/DE) Group Build!
Posted: Thu Oct 07, 2010 12:09 pm
by NukeMM
drdoom,
Thanks for this second chance to submit photos for this Group Build. I didn't realize that we had to submit pics separately from this forum. I have sent an email, to you, with the photos of my entry.

Re: Tin Can (DD/DE) Group Build!
Posted: Thu Oct 07, 2010 5:34 pm
by drdoom1337
NukeMM wrote:drdoom,
Thanks for this second chance to submit photos for this Group Build. I didn't realize that we had to submit pics separately from this forum. I have sent an email, to you, with the photos of my entry.

I have received your entry. For those other builders that question why I'd like photos sent to my email, it's because I feel it's unfair to judge from photos that may have been hastily taken. This also allows me to judge from the photos you feel are the most outstanding of your model!

Re: Tin Can (DD/DE) Group Build!
Posted: Fri Oct 08, 2010 2:31 pm
by Bob Pienkos
Hi Dr.Doom:
I'm out of town on a vacation. Could you please use my pictures from page 10 of this thread for my submission. Its the IJN Akikaze 1942. Thank you from "Quincy"
Bob Pink.

Re: Tin Can (DD/DE) Group Build!
Posted: Wed Oct 13, 2010 5:54 pm
by Thundergrunt
Great Group Build All it was fun. !!!!! Thanks all for the great participation. Thunder & DR. Doom
Re: Tin Can (DD/DE) Group Build!
Posted: Thu Oct 14, 2010 6:13 pm
by NukeMM
Any results from the judging, yet?
Re: Tin Can (DD/DE) Group Build!
Posted: Thu Oct 14, 2010 11:54 pm
by drdoom1337
NukeMM wrote:Any results from the judging, yet?
Not yet! We have to go over all the models together. I'll create a thread congratulating 1st, 2nd, and 3rd prize as soon as the judging is complete. Please bare with us as at least I have an extremely busy schedule and usually only get online around midnight (EST).

Re: Tin Can (DD/DE) Group Build!
Posted: Wed Oct 20, 2010 5:03 pm
by Bob Cicconi
Really nice builds, Cliffy and Bob Pink! I especially like Bob's IJN DD!

Re: Tin Can (DD/DE) Group Build!
Posted: Tue Oct 26, 2010 12:41 pm
by GTDEATH13
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Oct 26, 2010 6:10 pm
by Bob Cicconi
Good job, Nick!!

Re: Tin Can (DD/DE) Group Build!
Posted: Tue Nov 02, 2010 4:32 pm
by taskforce48
drdoom1337 wrote:Finally despite much anticipation, and some tough decision making.. we have our winners
1st Place goes to (drum roll)
Mark McKinnis with his Coontz
2nd Place
NukeMM with his Sumner
and finally the tough one
3rd Place
Quincy with his Akikaze
I would like to give an honorable mention to all other participants in this group build. Please participate in the next as well! Remember, it's coming up and it's gun cruisers!
Mark will receive a grand prize of HMS Hood 1/350 along with a first place medal
NukeMM and Quincy be sure to contact me by PM for your prizes as well
Just thought I would post this here as well, Great job everyone
Matt
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Nov 02, 2010 8:40 pm
by Mark McKinnis
Wow!!! Really????
I am humbled by your selection because there were so many excellent builds that were done.
I would like to thank those who made this happen and I would say that a lot of the credit goes to Niko Models. They really make a nice kit.
Thanks again,
Mark
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Nov 02, 2010 10:38 pm
by Quincy
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Nov 02, 2010 10:51 pm
by NukeMM
Congratulations, to you, too, Bob!
I'm pleasently surprised about my placement in this group build. I thought that the only way I'd win anything is if they had an award for the fastest build. I finished my Allen M. Sumner in 8 days.
Well done to all of the entrants!!
Re: Tin Can (DD/DE) Group Build!
Posted: Tue Nov 02, 2010 11:10 pm
by Thundergrunt
Congrats to you all, and all the participants it was a fun GB, and Carl we talked about thhe speed of you build.
