Page 2 of 2

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Fri Jun 30, 2017 11:03 pm
by Timmy C
Have you looked through the CASF Yorktown thread? viewtopic.php?f=46&t=12986

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sat Jul 01, 2017 12:00 am
by minispace
Just did. Question answered, many thanks. This is actually footage of no.16 flipping over.

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sat Jul 01, 2017 7:29 am
by minispace
Final flight deck marking result, thanks for the tip Timmy C.

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sat Jul 01, 2017 8:20 am
by Dan K
Nice!

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sun Jul 02, 2017 9:33 am
by minispace
The Island is getting along nicely. Waiting for the masts to dry properly, then finish the rigging.
The catwalk along the funnel is a nightmare, I can't fit it at the place where it should be. Still trying to figure that one out.

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Wed Jul 05, 2017 6:29 am
by minispace
Question: about airplane colour.
As stated earlier, painting is one of my weak spots. I currently only work with standard colours. No airbrush.

Sofar, I�ve painted all US aircraft ( 1942 era ) with these colours : Humbrol 109 ( WWI blue ), Humbrol 147 Light Grey.
It�s kind of OK, but it�s not 100%.

This is what I�m trying to get, a slightly lighter, greyer tone :

Image

I�ve tried several �blue grey� colours, but they all turn out more dark grey or even greenish. For instance, I bought the Airfix Wildcat kit just because it had the paint included, and the instruction told me to use Humbrol Acrylic 164. But this turned out more green/grey than blue ... I�ve even tried Lifecolour Seablue 5-S but I just see a greenish colour. And I�m not colourblind.

Does anyone know the right blue(grey) colour ( preferrably with make/number ) for these aircraft ? Something I can buy off the shelve ... Thanks.

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Wed Jul 05, 2017 12:15 pm
by Devin
I'm building Scott McCusky's Wildcat at Midway, currently. The closest I've found, out of the bottle, is the Model Master Acryl US Navy blue gray. I'll take a look at the bottle this evening and see what the actual product number is.

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Wed Jul 05, 2017 1:52 pm
by minispace
Great, look forward to seeing that. Thanks for looking in advance.

This is the difference I mean. Left is the 1/350 Wildcat with Humbrol 109, which is kind of OK, and right is the Airfix Wildcat with Humbrol Acrylic 164, which Airfix states I should use.
Just doesn't look right ...

Arno
Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Wed Jul 05, 2017 6:39 pm
by Devin
The Humbrol 109 in the photo you posted isn't that far off, actually. I agree that the 164 is way too gray.

The Testor's Model Master Acryl paint is "US Navy Blue Gray M-85" and is their product number 4847. I'm not convinced it's blue enough for a factory finish, but out of the bottle it does give a nice slightly weathered result.

I have a Tamiya Corsair that I painted with it, but bear in mind I wanted a faded bird so I cut the blue gray with 20% white to lighten it: http://devinjpoore.com/models/f4u1/index.htm

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Thu Jul 06, 2017 4:06 pm
by minispace
Thanks. Will try that one, although not on this build. Fot the small 1/350, it won't make too much difference.

But I'm planning to do a few proper airplane models as well, and for that I need to have the colour spot on.

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sat Jul 08, 2017 8:56 am
by minispace
Where would we be without clothes pegs ?

For those who like a challenge, the Dutch word for clothes peg = wasknijper

Image

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sun Jul 09, 2017 12:23 pm
by minispace
The on-deck airwing is coming along nicely. I've seen examples of people who make little masterpieces out of this scale, with photo-etch and all, keeps amazing me.

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Thu Jul 13, 2017 2:20 pm
by minispace
Managed to finally marriage the deck and the island.

Image
Image

Funny to see there should be 3 windows instead of 4 at the bridge.

For the rigging I've used as many photo's as I could find. The little pointy loose ends of the rigging will be cut away.

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Fri Jul 14, 2017 8:32 am
by SovereignHobbies
minispace wrote:Thanks. Will try that one, although not on this build. Fot the small 1/350, it won't make too much difference.

But I'm planning to do a few proper airplane models as well, and for that I need to have the colour spot on.
The build is progressing very well. I keep admiring these Infini sets but as yet haven't acquired the Merit kit! One day ...

As for the US Navy 1942 colours, these will do the trick:
https://www.sovereignhobbies.co.uk/coll ... light-gray
https://www.sovereignhobbies.co.uk/coll ... ay-fs25189

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sun Jul 16, 2017 9:26 am
by minispace
Thanks for all the hints and tips. I'm somewhat finished, few small details to go like the elevator barrier but have to source that first.
It is allmost straight out of the box, I cheated a bit with a couple of photo-etch leftovers from the Hornet/Enterprise kit.

USS Yorktown CV-5.

Image

Image

Image

Image

Image

Image

Image

Image

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Fri Jul 21, 2017 8:55 pm
by medicmike
She turned out awesome. Great build :thumbs_up_1:

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Sat Jul 22, 2017 7:59 pm
by Dan K
Agreed. Great build.

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Tue May 08, 2018 7:24 pm
by dlancast
Hi Arno, I enjoyed your post of the Yorktown build. Very nicely done. I am currently building the same Merit kit. Can't say that I'm overly impressed with what Merit has done... some good and some bad. I have a question. Where did you find the picture of the mural that was located in the Hanger Deck. I have decided to copy what you have done for the fun of it. Did you find the original picture in a book? Best regards, Dennis

Re: Yorktown CV-5 -- 1/350 by Merit

Posted: Thu May 27, 2021 9:01 am
by minispace
dlancast wrote:Hi Arno, I enjoyed your post of the Yorktown build. Very nicely done. I am currently building the same Merit kit. Can't say that I'm overly impressed with what Merit has done... some good and some bad. I have a question. Where did you find the picture of the mural that was located in the Hanger Deck. I have decided to copy what you have done for the fun of it. Did you find the original picture in a book? Best regards, Dennis
Sorry, I only saw your post now. I�m going to start my Yorktown 1/200 model soon, so started looking for references again.

So in case you�re still looking for this information, I made the mural myself using all the pictures I could find. My source was the book Legends of Warfare USS Yorktown CV-5 by David Boyle.

I decided to make a better version of it as the scale of my coming build was going to be bigger, and then I found out someone had already beaten me to it :

Image

Credit : https://drydockdreams.games/2020/04/02/ ... nceptions/