Page 2 of 7

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Nov 28, 2019 10:47 pm
by silvershadow
a few more

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Nov 28, 2019 10:51 pm
by silvershadow
this is just a last few bits and bobs for on side for now

Re: 1/350 CVN 65 - Project Enterprise

Posted: Fri Nov 29, 2019 12:47 am
by Miguel
:big_eyes:

You are cheating Jacques

You are well advanced by now in your build ,no way all that job has been done in so short time.

Anyway ,what a wonderful detail you are doing ,been watching a few carrier builds here and yours is truly amazing.also want to ask which documents or info You are using to get all this amount of detail.
Congratulations and thanks

Re: 1/350 CVN 65 - Project Enterprise

Posted: Fri Nov 29, 2019 1:28 am
by silvershadow
Miguel wrote::big_eyes:

You are cheating Jacques

You are well advanced by now in your build ,no way all that job has been done in so short time.

Anyway ,what a wonderful detail you are doing ,been watching a few carrier builds here and yours is truly amazing.also want to ask which documents or info You are using to get all this amount of detail.
Congratulations and thanks
I started when I was 35 on this model, I am currently on 40 this year, so yeah its been 5 years, but I am a slow builder, like reaaaaaly slow builder.(Its funny, I can see my eyes is also not so sharp as it were when I was 35, cant focus super close anymore and have to pull back a bit)
I do have quite a few images to get to where I am at the moment, taking about 2 -4 weeks sometimes to build some stuff depending on how much time I do get behind the bench after hours (but its no fun posting everything in one go and then wait forever again for updates, but will try to keep you guys entertained :heh: ) ~ Up to this point, the first year has passed and felt like I was not really getting anywhere tho ~

Pictures and information: I have been collecting for years images from the web/ youtube videos. It helps putting them into folders and name them by the areas, then when you build that "zone" it makes it easier to know these are the photos you have related to this. Some areas are really hard to figure out with sometimes very limited information.

Re: 1/350 CVN 65 - Project Enterprise

Posted: Fri Nov 29, 2019 2:06 am
by Jaguar
Hello Jacques.

This work is outstanding. I always love any aircraft Carrier model, but your pictures are amazing.

I will keek watching looking for new advances.

Jorge

Re: 1/350 CVN 65 - Project Enterprise

Posted: Fri Nov 29, 2019 7:07 pm
by ModelMonkey
:big_grin:

Lovin' it.

Re: 1/350 CVN 65 - Project Enterprise

Posted: Mon Dec 02, 2019 2:03 am
by silvershadow
Hi guys. Thank you for the support, really appreciate it!
Just a little back story before I continue (took a 8 month break since last image and wanted to get into the building again).

I really liked the idea of removable parts like I did with the areas of the boats and hangar entrance, and looked at how can I do it to this side of the model. (Starboard side)
I was still a little bit scared of just cutting away, but had a cool idea that was a huge risk, but hey, its only plastic. If I screw up, just buy another kit (probably worst scenario ever lol). So before I just jump in with my drill, I decided to build this first, using the reversed area of the main deck as a template, and if i do mess it up, I still have the original kit part in place on the basic model.

Re: 1/350 CVN 65 - Project Enterprise

Posted: Mon Dec 02, 2019 2:05 am
by silvershadow
more images

Re: 1/350 CVN 65 - Project Enterprise

Posted: Mon Dec 02, 2019 2:08 am
by silvershadow
and the last bit for today - (apologies for the gloomy dark pictures - Cellphones does not take great pictures. We have moved homes and my work space it now literally 1.2m wide lol, not the best of lighting conditions)

Re: 1/350 CVN 65 - Project Enterprise

Posted: Tue Dec 03, 2019 10:42 pm
by silvershadow
pushing onwards .........

Re: 1/350 CVN 65 - Project Enterprise

Posted: Tue Dec 03, 2019 10:44 pm
by silvershadow
a few more...

Re: 1/350 CVN 65 - Project Enterprise

Posted: Tue Dec 03, 2019 10:47 pm
by silvershadow
and the last bit of this section...

Re: 1/350 CVN 65 - Project Enterprise

Posted: Wed Dec 04, 2019 7:43 am
by marijn van gils
Excellent work! :thumbs_up_1:
And true dedication...

Re: 1/350 CVN 65 - Project Enterprise

Posted: Wed Dec 04, 2019 12:54 pm
by steel_tiger1
Wow! :jump_1: :good_job:

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 12:53 pm
by LukasB
I will really watch this. Great building :smallsmile: .

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 2:22 pm
by gtbred
I got to get back on my builds. Damn good work!!! :thumbs_up_1:

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 2:55 pm
by silvershadow
Thanks for the support guys, will post tomorrow again =)

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 10:28 pm
by silvershadow
A quick update on this section (I feel the rivets might be a bit much on this, might sand this down a bit later)

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 10:30 pm
by silvershadow
This next section required a bit more thought on how to rectify this. The kit parts are not really correct

Re: 1/350 CVN 65 - Project Enterprise

Posted: Thu Dec 05, 2019 10:32 pm
by silvershadow
This is what I wanted to achieve - a bit of a risk, but want to give this a shot