Revell 1/380 USS Burleigh

[Triumph68]

a little update...doing much at same time...
dry-fitted front double mast to see effect...looks good to me
new platform just in front of bridge ,scraping of cabel machinery and re-placing it on new platform...not sure if I'm gonna rebuild scratch all of those
new modified AA platform on both sides of double mast
making scratch a propeller...a real challenge
giving final touches on hull...this hull gave me many problems... the hull was wobbely ...not visible when taking as ....but when you ad below waterline ...you get confronted with it

[Triumph68]

totaly oposit side of ship....this is real vs kit...there are no 3 portholes or a slight board enlargement creating that line...the top front board is way too low ...
so I cut...clean ....and next will be filling gaps and adding new top side
in order to get this clean...I had to glue the small front deck in place
I'm afraid this is getting out of my hands....all these modifications....hardly visible ....some might see me as a crazy ....can't blame them lmao

[Triumph68]

with side board...it doesn't show in pic....but filled ancre hole after I took this shot

[marijn van gils]

The side board is also much thinner now. Definitely an improvement!

[Triumph68]

The side board is also much thinner now. Definitely an improvement!

yes marijn..that was 1 reason...
the hight increase was mainly to be able to make the front openings for "Les Amares"....also added 1 hole ...with same use but lower and more backwards
gave it a primer layer...I use paint also to check visualy ...paint makes mistakes come out clearly
my ships butt is starting to look ok
but bow...I get the feeling I should have made the new sideboard a little longer...I mean make them go farther to the rear

[Triumph68]

I found this one resently.....gives good view of bow....all those lines ...looks like a spiderweb....thats gonna be a challenge

[Triumph68]

thinking of leaving 1 cargo opening... open, putting 2 levels and store some stuff in it...and giving it a moovemend with the unloading of a GMC...and some other stuff....but that's gonna give it way more to do...

[Triumph68]

this looks better

[Triumph68]

started back on this one...
A: new frontgun base..with doubble level
B: new AA 20mm gun base
C: redid modified crane base
E: small adding for AA gun..and so its like real ship
D: small adding for fixing the stairs behind...like on real ship
and started adding on rear base of commander controll floors

[Triumph68]

continued a little on front gun platform
and this is what I use to base on

[Triumph68]

added little adding before bottom paint will be done
when looking close at real ship pictures...I realized bridge fly is smaller as kit shows
more done on front gun base

[Triumph68]

not easy to ad missing parts according pictures ...and puzzle the whole thing into something look alike...big outlines are there now
did some painting as well...not finished that hull...even far from

[Triumph68]

after cutting your .040" thick plastic, remove the burrs before gluing that plastic piece to it's location as easier to do then then after glued in place.

I prefer gluing them ...then fine tuning...it fits better that way and no line visible as you lime both parts at same time...my opinion

[Triumph68]

and little by little its taking form

[Triumph68]

and to compare what I use with what I make

[Triumph68]

little evolution

[Triumph68]

a thing I was afraid of, the dazzle camouflage..and its all based on black and white pictures... so speculating about colors( also with what I have lol) and formsize...anyway...starts to go to it but..will need fine tuning and redoing like the 2 darker grey bars crossing very light grey and the other on the blueish grey...they need to be bigger...also the black needs new outlines...I new this was gonna be hard...paint is my weakest point I'd say

[Triumph68]

getting better...started also other side...they are totaly different...reason why I do 1 side ..then the other

[Triumph68]

so many hours trying and spending ...and I have the feeling nothing happened.....nah not realy...but still very much to do and scratch build to do
at least she's getting her basic look and form

[Triumph68]

forgot to ad this...detailing