Page 2 of 2
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Tue Apr 15, 2025 2:51 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 15th) ..Today I start the painting !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Wed Apr 16, 2025 3:06 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 16th) ..Today I continue the painting !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Thu Apr 17, 2025 3:31 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 17th) ..Today I continue the painting !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Fri Apr 18, 2025 10:26 am
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 18th) ..Today I started the presentation base !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Tue Apr 22, 2025 3:36 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 22nd) ..Today I completed the presentation painting ,also done the top ring of the SUB !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Wed Apr 23, 2025 3:42 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 23th) ..Today I glued the sub on the base !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Thu Apr 24, 2025 3:38 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 24th) ..Today I continue stabilising the sub on it's base !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Fri Apr 25, 2025 5:41 am
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 25th) ..Today I continue stabilising the sub on it's base !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Mon Apr 28, 2025 4:32 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(APRI 28th) ..Today I continue stabilising the sub on it's base !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Thu May 01, 2025 2:58 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 01st) ..Today I continue working on the dercor !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Fri May 02, 2025 5:32 am
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 02nd) ..Today I startec working on the sub exterior details !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Mon May 05, 2025 2:16 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 05th) ..Today I completed the sub rudder and dril the holes on the entrance hatch !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Tue May 06, 2025 2:12 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 06th) ..Today I started the moving mechanical of the rudder . painted the entrance hatch and found a barrel that suit the project and assemble and prime it !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Wed May 07, 2025 3:47 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 07th) ..Today I completed the connection with the rudder , done the barrel also some structural details and started to add the hatch details !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Thu May 08, 2025 2:52 pm
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 08th) ..Today I completed the connection to the barrel; ,completed the the hatch details and glued it to the crane !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Fri May 09, 2025 10:10 am
by jmarc
First I'd like to thank you for follwoing this project , it's quite appreciated !
BUSHNELL SUBMARINE (3D PRINTED with a TWIST)
(MAY 09th) ..Today I done the last details and the project is now completed ! !
If you like to view the complete WIP on this project , just follow this link :
https://photos.app.goo.gl/tsRuAcLy69PUjuqVA
Enjoy !
Jmarc
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Tue Jul 15, 2025 1:43 pm
by JoeP
Are you planning to donate/lend this to a museum? It would be especially appropriate as we in the USofA celebrate the 250 anniversary of our Revolution.
Re: BUSHNELL SUBMARINE in 1/48 (3D PRINTED with a TWIST)
Posted: Fri Nov 28, 2025 7:37 am
by jmarc
JoeP wrote: Tue Jul 15, 2025 1:43 pm
Are you planning to donate/lend this to a museum? It would be especially appropriate as we in the USofA celebrate the 250 anniversary of our Revolution.
NNNNNNNNNNNNNNop !