Calling all Ise (伊勢) and Hyuga (日向) fans
Moderators: BB62vet, MartinJQuinn, Timmy C, Gernot, Olaf Held, Dan K, HMAS, ModelMonkey
-
Guest
Thanks Timmy,
Yeah, we have a couple of pretty good ones and there is always Mail Order, if you have the patience.
While I am at it, is there anyone in the membership who might have a copy of the Hasegawa 1/700 scale Hyuga instructions as it was originally in it's battleship configuration? I have a buddy who is without an internet connection who has the kit, he purchased it second hand complete with everything but the instructions. I have been looking around for him, but so far managed to come up dry. I offered him copies of my sheets from the Battleship AC version but he wants to hold out for the real deal before attempting it.
Yeah, we have a couple of pretty good ones and there is always Mail Order, if you have the patience.
While I am at it, is there anyone in the membership who might have a copy of the Hasegawa 1/700 scale Hyuga instructions as it was originally in it's battleship configuration? I have a buddy who is without an internet connection who has the kit, he purchased it second hand complete with everything but the instructions. I have been looking around for him, but so far managed to come up dry. I offered him copies of my sheets from the Battleship AC version but he wants to hold out for the real deal before attempting it.
- Timmy C
- Posts: 12463
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
http://www.modelwarships.com/reviews/sh ... 0IseSD.htm
Half way down the page includes a scan of the Ise BB instructions. They should work for his Hyuga.
PS: Don't for get to log in if you didn't click remember me
Half way down the page includes a scan of the Ise BB instructions. They should work for his Hyuga.
PS: Don't for get to log in if you didn't click remember me
De quoi s'agit-il?
- treadhead1952
- Posts: 36
- Joined: Wed Jun 21, 2006 7:21 pm
- Location: Las Vegas, NV
- Contact:
Thanks Timmy,
Yeah, it's late for me, two days a week my job lets me come to work at 4AM, lucky me. It is a case of exuberance overcoming a tired brain. I will snag copies of the instructions for my bud, he will greatly appreciate them.
I did click the remember me box, but my 'puter's security system overcomes thngs like that on occassion, much to my dismay.
Yeah, it's late for me, two days a week my job lets me come to work at 4AM, lucky me. It is a case of exuberance overcoming a tired brain. I will snag copies of the instructions for my bud, he will greatly appreciate them.
I did click the remember me box, but my 'puter's security system overcomes thngs like that on occassion, much to my dismay.
Jay Massey
treadhead1952
Las Vegas, NV
treadhead1952
Las Vegas, NV
- treadhead1952
- Posts: 36
- Joined: Wed Jun 21, 2006 7:21 pm
- Location: Las Vegas, NV
- Contact:
- treadhead1952
- Posts: 36
- Joined: Wed Jun 21, 2006 7:21 pm
- Location: Las Vegas, NV
- Contact:
Hooray, huzzah, and all them other superlatives signifying celebration, just got back from my LHS and they scored my Toms' Modelworks PE sets, #730 annd #731 for IJN Battleships. Now I can continue on with my Ise. I had run short of Aircraft trolleys after up grading my air complement to double the 6 supplied with the kit. I had been amusing myself painting up and adding bits and pieces but they ran dry at this point.
[
Now onward and upward.
Oh yeah, The Morskie Monograph on the Ise is number 31 by Slawoimir Brzezinski and Piotr Wisneiwski. The book has tons of illustrations, drawings to scale in 1/700 and 1/400 as well as a full color drawing in 1/400 from top and side. It shows the ship as its' original configuration as a battleship and as a hybrid battleship/aircraft carrier. If you are doing this ship it is a very good reference work.
[Now onward and upward.
Oh yeah, The Morskie Monograph on the Ise is number 31 by Slawoimir Brzezinski and Piotr Wisneiwski. The book has tons of illustrations, drawings to scale in 1/700 and 1/400 as well as a full color drawing in 1/400 from top and side. It shows the ship as its' original configuration as a battleship and as a hybrid battleship/aircraft carrier. If you are doing this ship it is a very good reference work.
Jay Massey
treadhead1952
Las Vegas, NV
treadhead1952
Las Vegas, NV
-
Ben Berkowitz
- Posts: 9
- Joined: Mon Jun 19, 2006 6:03 pm
- Location: New York
-
Gone Asiatic
- Posts: 836
- Joined: Tue Jan 11, 2005 7:44 pm
- Location: Zipangu - Jipukuo

I have a two DVD set titled Naval Vessels Collection of the Imperial Japan
The set was put together with peacetime and wartime footage of IJN ships recently discovered in archives and warehouses. Hyuga had evidently, prior to her conversion - and if I understood the narrator correctly, suffered a turret acident. The footage includes a battleship gunnery exercise that was taken from forward facing aft - all guns are trained to port. Suddenly, hot gases and flames vent from the guns of one of the turrets in a gradual manner obviously not normal - breech blocks were evidently still open when somehow propellant ignited.
If I figure out a way to run these discs on my computer, perhaps I can post images.....any suggestions?
Must check out the Combined Fleet.com website to confirm which battleship suffered the casualty.
No Quarter Asked - None Given


- aeronautic
- Posts: 93
- Joined: Mon Nov 07, 2005 6:03 am
- Location: Aalborg Denmark
- Contact:
Hi Gone Asiatic
Yes you are right, it was HYUGA
Mr. J. Kluger have made a model of HYUGA with one turrets missing
See here:
http://www.modelshipgallery.com/gallery ... index.html
I will love to see images of IJN ships from those discs
Regards
Lars
Yes you are right, it was HYUGA
Mr. J. Kluger have made a model of HYUGA with one turrets missing
See here:
http://www.modelshipgallery.com/gallery ... index.html
I will love to see images of IJN ships from those discs
Regards
Lars
- MartinJQuinn
- Posts: 8562
- Joined: Tue Jan 11, 2005 1:40 pm
- Location: New Jersey
How did I miss Mr. Kluger's Hyuga? Very nice model. One of the Japanese companies (maybe Hasegawa?) makes a photo-etch set for the Hyuga which includes the plate to cover the barbette of the turret which was damaged.aeronautic wrote:Hi Gone Asiatic
Yes you are right, it was HYUGA
Mr. J. Kluger have made a model of HYUGA with one turrets missing
See here:
http://www.modelshipgallery.com/gallery ... index.html
I will love to see images of IJN ships from those discs![]()
Regards
Lars
Martin
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
-
Gone Asiatic
- Posts: 836
- Joined: Tue Jan 11, 2005 7:44 pm
- Location: Zipangu - Jipukuo
-
Gone Asiatic
- Posts: 836
- Joined: Tue Jan 11, 2005 7:44 pm
- Location: Zipangu - Jipukuo
ISE at the Battle of Cape Elgano

Above is IJN Ise firing main battery to ward-off air attack at the Battle of Cape Elgano.
No Quarter Asked - None Given


-
Gone Asiatic
- Posts: 836
- Joined: Tue Jan 11, 2005 7:44 pm
- Location: Zipangu - Jipukuo
DVDs
I ordered them from an advertisement that aired during an NHK TV program. There are two companies listed as involved with production. One listed is "Creation 5", the other I think is the archives that stored the old film and/or was involved in restoration ( I can only read of few of the kanji in the name).Those are pretty nice-looking pics....From whom are these DVD's available?
I will post other images in appropriate forums (I.E. IJN cruiser or carrier fans).
No Quarter Asked - None Given


- treadhead1952
- Posts: 36
- Joined: Wed Jun 21, 2006 7:21 pm
- Location: Las Vegas, NV
- Contact:
Hi All,
I have gotten to an ending point with my Hasegawa Ise in 1/700 scale and thought I would add a few pictures of it here. I say ending point as it is itended to go in a larger doirama of a IJN Harbor that I have yet to start. At this point I am just building up the vessels to populate the scene. When it comes time to add it I will be populating it with some figures and adding a few more details to tie it in with the rest of the action in the dio.





I have gotten to an ending point with my Hasegawa Ise in 1/700 scale and thought I would add a few pictures of it here. I say ending point as it is itended to go in a larger doirama of a IJN Harbor that I have yet to start. At this point I am just building up the vessels to populate the scene. When it comes time to add it I will be populating it with some figures and adding a few more details to tie it in with the rest of the action in the dio.





Jay Massey
treadhead1952
Las Vegas, NV
treadhead1952
Las Vegas, NV
- aeronautic
- Posts: 93
- Joined: Mon Nov 07, 2005 6:03 am
- Location: Aalborg Denmark
- Contact:
- treadhead1952
- Posts: 36
- Joined: Wed Jun 21, 2006 7:21 pm
- Location: Las Vegas, NV
- Contact:
- angeleyes
- Posts: 759
- Joined: Sun Mar 19, 2006 3:00 am
- Location: Greece
- Contact:
cross sections lower hull info
looking for cross sections for the lower hull part for the hyuga or ise so i can built a full hull hyuga in 1/700.It would be the ww2 era so it must be the one with the side buldges.I have build a lower hull from balsa wood but i would like to check how close or far is it from the real thing.

