Re: 1/200 USS NIMITZ - 2003
Posted: Thu Aug 13, 2015 6:00 am
Your most welcome. She is a fine ship. We called her "Never Dock" LOL I was told she as my first wife because everytime she called and that was allot I had to come running LOL
Ok the fantail as your looking into it from the seaward side there used to be a seawiz there when I was on board but it seems they removed it now.
In the back in the center was double hatches that could be opened like from the hangar bay #3 ones for the jet shop for jet engine testing, They would roll the engine out on the fantail to test it.
If you went to the port side of the fantail there was you entered through an opening heading to the hangar bay#3 through the doors I described earlier. So you had two rooms before getting to the hangar bay and in the first room as your leaving the fan tail on both sides of the ship was a spindel that was used for the lines for the pier.
On the port side of the fantail was also a opening shaped like a door but no door there to access the boat boom for the ships boats. It was steel and attached to the hull with a bracket and a pin and it swung out and there as non skid on top of it to walk on to get to the ships boats tide up to it in the water.
Also in the very back as a ladder going up to a walk way were they had some pyro lockers. We kept flares there.
Also in the middle of the deck of the fantail off center to starboard as a hatch with a ladder down.
In the part of the ship that has its name mounted that stuck out from the fantail there as a ramp there when I was on board that lowered when we when ashore over seas for port visits. That ladder in the middle of the deck I mentioned above went to a passage that went to the ramp. I noticed they have added the bars on the back of the ship. I think this is for the same purpose but maybe a more safer and better way. So they have removed the ramp and put in a hatch there to open and the bars are to tie up the liberty ferrys that come pick up the crew. Not all ports e can pull in. we have to anchor out.
Well this is a brief description of the fantail. Just try to picture what I am saying in your mind or hile looking at the photos or your model. Any questions just ask. I will check in to your build here every day and check if I can help I will.
Doi9ng a great job. She looks good.
Ok the fantail as your looking into it from the seaward side there used to be a seawiz there when I was on board but it seems they removed it now.
In the back in the center was double hatches that could be opened like from the hangar bay #3 ones for the jet shop for jet engine testing, They would roll the engine out on the fantail to test it.
If you went to the port side of the fantail there was you entered through an opening heading to the hangar bay#3 through the doors I described earlier. So you had two rooms before getting to the hangar bay and in the first room as your leaving the fan tail on both sides of the ship was a spindel that was used for the lines for the pier.
On the port side of the fantail was also a opening shaped like a door but no door there to access the boat boom for the ships boats. It was steel and attached to the hull with a bracket and a pin and it swung out and there as non skid on top of it to walk on to get to the ships boats tide up to it in the water.
Also in the very back as a ladder going up to a walk way were they had some pyro lockers. We kept flares there.
Also in the middle of the deck of the fantail off center to starboard as a hatch with a ladder down.
In the part of the ship that has its name mounted that stuck out from the fantail there as a ramp there when I was on board that lowered when we when ashore over seas for port visits. That ladder in the middle of the deck I mentioned above went to a passage that went to the ramp. I noticed they have added the bars on the back of the ship. I think this is for the same purpose but maybe a more safer and better way. So they have removed the ramp and put in a hatch there to open and the bars are to tie up the liberty ferrys that come pick up the crew. Not all ports e can pull in. we have to anchor out.
Well this is a brief description of the fantail. Just try to picture what I am saying in your mind or hile looking at the photos or your model. Any questions just ask. I will check in to your build here every day and check if I can help I will.
Doi9ng a great job. She looks good.













