Page 16 of 201

Posted: Thu Sep 20, 2007 11:40 pm
by Nektarios
Sparrow wrote:Liberty is in the very root of any form of art, Simon. And I suppose scratchbuilding can be considered some sort or art, or so.
:)

Anyway I usually take TONS of liberty when I sracthbuild... er... or when I simply build, hehe.
That s the whole idea of building models. Doing what you wish with them after all they re your creations.

Posted: Fri Sep 21, 2007 4:15 am
by simon b
Nektarios

As requested AO-179 USS merrimack. The JAG kit managed to sneak into the foreground !!

Image
Image
Image

Theres a whole host of improvements i could make, like redoing the stern, under the helo deck and the funnel to name but a few. But as this is my first proper scratchbuild, i'll let these things go this time. I did try to make an accurate funnel with balsa but couldn't quite get it right. Although the squarer one is wrong, as least its true/level/lined up etc

Time for some more filling and sanding before a grey primer coat to seee all the sanding/filing i've missed :big_grin:

Thats all for now

Posted: Fri Sep 21, 2007 8:42 am
by gtb -red
Happy belated Birthday John ,Simon killer supply ship man will start back on the Henry J. Kaiser, wrist and fingers are healed sore but healed.Nice ships everyone. :thumbs_up_1: :wave_1:

Posted: Fri Sep 21, 2007 1:07 pm
by Nektarios
simon b wrote:Nektarios

As requested AO-179 USS merrimack. The JAG kit managed to sneak into the foreground !!
Theres a whole host of improvements i could make, like redoing the stern, under the helo deck and the funnel to name but a few. But as this is my first proper scratchbuild, i'll let these things go this time. I did try to make an accurate funnel with balsa but couldn't quite get it right. Although the squarer one is wrong, as least its true/level/lined up etc

Time for some more filling and sanding before a grey primer coat to seee all the sanding/filing i've missed :big_grin:

Thats all for now
Good work so far Simon especially considering that its your first attempt to scratchbuild. :thumbs_up_1:

Posted: Fri Sep 21, 2007 1:12 pm
by Nektarios
gtb -red wrote:Happy belated Birthday John ,Simon killer supply ship man will start back on the Henry J. Kaiser, wrist and fingers are healed sore but healed.Nice ships everyone. :thumbs_up_1: :wave_1:
Welcome back gtb-red. Kidcurrie and I were wondering what happened to you (long time since you last posted). I m happy that you are better now.

Posted: Fri Sep 21, 2007 10:54 pm
by gtb -red
Nektarios I sent you and Kid a personal E-mail a while back didn't know if you guys got it. Too many heavy meds man glad to get off them.Fingers are working still hurting a little but can manage cutting and drawing .Will be sending out photos of Henry J. in about a week. Let stand out too long in the open,lots of dust. :big_grin: :wave_1:

Posted: Sat Sep 22, 2007 2:49 am
by Nektarios
Some photos of my build of LCC-19. Its the old Waveline resin kit. I bought it in 2001 and i wish i knew that it would be released in plastic. The kit isn t bad but it requires lots of scratchbuilding, no dedicated decal set and its the 1998 version. I added several antennas and electronics in order to modernise it plus i uparmed it with 2 RAM launchers.

Image
Image
Image

more photos will follow.

Posted: Sat Sep 22, 2007 9:12 am
by Sparrow
Very nice build of an odd-looking subject, Nektarios. I�ve always been impressed by the dismiss of any effort by the US Navy to make these command ships less ugly :heh:
And still, perhaps for that very fact, they are very interesting subjets.

I�ve finished my spanish MSC "Ebro"
Here she is.

Image

Posted: Sat Sep 22, 2007 5:12 pm
by Nektarios
Foeth: Please don't quote pictures!


Very impressive work on such a small ship :thumbs_up_1: just unbelievable.

Posted: Sun Sep 23, 2007 9:38 am
by Avery Boyer
:thumbs_up_1: :thumbs_up_1:

Posted: Tue Sep 25, 2007 9:48 am
by assddr
CLG-4
Image
CGN36
Image

Posted: Tue Sep 25, 2007 3:28 pm
by Sparrow
Hey. Very nice job.

Like those Cold War hybrids. �Are they from JAG?

Posted: Wed Sep 26, 2007 12:26 am
by Nektarios
Great job :thumbs_up_1:

Sparrow i think that CLG-4 must be scratchbuilt and CGN-36 from the Pitroad kit.

Posted: Thu Sep 27, 2007 1:28 am
by Nektarios
Here are some photos of a DML CV-31 that I found on a Japanese site.

http://blogs.yahoo.co.jp/nanase1942/MYBLOG/yblog.html

Posted: Thu Sep 27, 2007 3:51 pm
by Avery Boyer
Stunning CV-31!! Amazing work!!

I just started a project of my own, my first in a month or so. What with school and all, I just haven't had very much time at the workbench.

The subject is a LST-542 class Landing Ship Tank. I haven't decided which yet, but the plans represent LST-802 in 1956. I just started this evening, but I already have the hull almost finished. One side is glued on and needs to be trimmed, which I have since done. Not a very good pic, sorry.

Image[/img]

Posted: Thu Sep 27, 2007 4:32 pm
by simon b
A quick update on my AO-179 USS merrimack in 350 scale.
Layed on the first grey coat to see whats what.

Image
Image
The JAG cimarron (700 scale) for size comparison
Image

Posted: Thu Sep 27, 2007 4:59 pm
by johndon
Very nice work Simon :thumbs_up_1:

John

Posted: Thu Sep 27, 2007 5:42 pm
by Avery Boyer
And you just had to post it right after my photos, just to prove how poor a builder I am :big_grin:

In all seriousness, amazing work, that's gonna be a show stopper! :thumbs_up_1: :thumbs_up_1:

Posted: Fri Sep 28, 2007 6:39 am
by Nektarios
Really amazing Simon :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Posted: Fri Sep 28, 2007 8:43 am
by Sparrow
That�s huge, man!

Very nice build indeed. :smallsmile: