Page 16 of 17

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Thu Oct 17, 2013 9:46 am
by Neptune
Somebody should punish you for that :heh:

Great job, you raised the bar on plane detailing! Slightly too much wash for those panel lines, but I haven't ever done anything like this myself, so I'll forgive you :big_grin:

Anyhow great work which requires a lot of patience :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 17, 2013 5:40 pm
by NWarty
After a much needed break, I'm back to finishing up the airwing, specifically wrapping up VF-41.

Finished the last two Cats with open canopies. I ran out of GHQ weapons so I'm stalled for another week until I can get the other two sets needed to complete the ordinance on the F-14's. Only three more birds to finish and I can start the process of gluing everything down topside, and laying out the crew and vehicles.

-Blake

Crummy iPhone photo again.

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 17, 2013 5:51 pm
by Dave from Downunder
You seriously suggesting that these are 1/350 - i have seen 1/72 with much less detail.
I think these are unbeleivable :thumbs_up_1:

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 17, 2013 5:52 pm
by Goodwood
Incredible detail at that scale, mate! As someone who is much better at aeroplane modeling than ship modeling, I can appreciate how difficult it is to get that kind of depth on such a...tiny...aircraft. Bombs and AA missiles at that scale? Madness!

Dave may be on to something... :wave_1:

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 17, 2013 6:10 pm
by KevinYoung
Beautiful work on them Tomcats. Kevin

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 17, 2013 7:46 pm
by NWarty
Dave, Sean and Kevin, many thanks guys :thumbs_up_1:

At roughly 6-7 hours per Cat to complete, the work is mind numbing :eyes_spinning: Thank God there's only 10 of them.

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Mon Nov 18, 2013 4:24 pm
by DWD
Great looking build Blake. Those are some sweet Cats too!!! I was wondering how the GHQ ordanance would look on them. Can't wait to see your finished build. :thumbs_up_1:

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Tue Nov 19, 2013 12:49 pm
by NWarty
Thanks Doug! :thumbs_up_1:

Had to go back and fix a couple of missing things on the first two like the red warning stripes behind the wing bags and the dark grey missile stripe on the AIM-9s. If you look at the photos of the JR and Aces Tomcats from three pages back, the red warning stripes are much longer on the Aces' backs that the JR's.

Another thing to note, again the Starfighter decals are a bit inaccurate (but boy I am still glad that somebody is making decals for these). The roundels should be small and low-vis, not the high-vis roundel that came with the sheet. I'm okay with that as I'm just being nitpicky at this point. Believe me, I'm tired of going back and fixing things :lol_1:

Seats, RIO panel and pilot heads done, decals done, canopies are painted, got to shoot Dullcoat, spine aerial and just waiting on the GHQ sets and we're done with the airwing. The Dullcoat as you can see from the photo above, really tones down the wash a good bit. Two of these Cats will be taxiing out towards the Waist Catapults.
aces1.JPG
We're almost there!!!!

Image

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 12:51 am
by NWarty
300+ hours for the topside Airwing....holy carp...the aircraft are finally done...

Image
Image
Image
Image
Image
Image

Image

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 2:55 am
by LE BOSCO
NWarty wrote:......300+ hours .....
hello Blake

300+ hours OK , may be! but for a extraordinary results,I have never seen such a aircraft fleet also convincing at this scale :woo_hoo: :woo_hoo: :woo_hoo: it is very simple, it looks like at of 48em :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:
I do not know if my "English" happens to translate my enthusiasm....... but you make a model worthy of a museum, a true masterpiece
"bravo l'artiste "
cheers
nicolas

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 10:21 am
by Goodwood
I think Nick may be onto something. That is flat-out extraordinary aircraft detailing at that scale. Really makes the whole thing come together in an organic, living flight deck.

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 2:33 pm
by NWarty
Nicolas, merci beaucoup! Your english was just fine sir and many thanks! :thumbs_up_1:

Sean,
Thanks man, I'm getting ready to start putting crew members down to have a party on the flight deck :big_grin:

Now the process starts of nitpicking, fixing a few flaws and wrapping her up, gluing down the topside, whip antennas, some extra ladders, an extra decal for efficiency award, etc. Next photo post will most likely be near the end of this build.

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 3:45 pm
by KevinYoung
That is an awesome build right there truly incredible work and Neil Patrick Harris ? breakdown makes me laugh :big_grin: .regards Kevin

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 5:08 pm
by anyahajobuzi
So this is what a Nimitz looks like WITH aircraft on it???!!
Well, this is what a Nimitz looks like with an exceptionally detailed airwing!!!!! Very nice work!!!!! Your work is inspiring me to try to better than I planned! Damn you for setting the bar so high!

I am just super-busy with my USS Vincennes, and I see your next ship is a destroyer?! Can't wait!

Cheers: Laci

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Sun Nov 24, 2013 7:47 pm
by NWarty
KevinYoung wrote:That is an awesome build right there truly incredible work and Neil Patrick Harris ? breakdown makes me laugh :big_grin: .regards Kevin
Justin Timberlake :big_grin:

Laci,
Many thanks sir and can't wait to see your progress on the flight deck :thumbs_up_1:

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Wed Jan 01, 2014 4:43 am
by NWarty
Hey! The party's on the flight deck!

After a much needed break, I glued in the catwalk braces and started placing the flight deck crew. All aircraft on the topside are now glued down! Not shown in this pic, but the port antennas are now glued into place also.

Image

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Wed Jan 01, 2014 7:17 am
by LE BOSCO
Hello Blake

I'm just speechless ......this is simply beautiful :worship_1:
Cheers
Nicolas

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Wed Jan 01, 2014 7:07 pm
by NWarty
Nicolas,
Many thanks my friend.


Spent today nitpicking and finalizing the port and starboard whip antennas, built a couple more boxes, nitpicked some more. Lastly, Ryan generously donated the bow netting from his stash and I was able to completely rebuild it.


And she's done....my God, I never thought I would say that. It's done...

I'll move to the completed builds section with full pictures, write up and what not once the display case arrives in a couple of weeks.


Holy crap, it's done.


Image

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Wed Jan 01, 2014 7:41 pm
by DWD
CONGRATULATIONS!!!! She looks great. I look forward to the photo finish!

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Posted: Wed Jan 01, 2014 9:49 pm
by Goodwood
Don't forget to include a picture of Data fist-pumping and saying "Yes!" from ST: Generations!

And then when he says "...oh $#@&!"