The Ship Model Forum

NigelR32 wrote: (I know I should be calling my Bismarck "He", but it's MY Bismarck, so she's a "She")

As with all things Bismarck, even that's up for debate! viewtopic.php?f=2&t=139168

Timmy C wrote:

NigelR32 wrote: (I know I should be calling my Bismarck "He", but it's MY Bismarck, so she's a "She")

As with all things Bismarck, even that's up for debate! viewtopic.php?f=2&t=139168

Thanks Tim,

I'm really enjoying working on her, she's coming along nicely. Once complete, the work on her hull will really make the difference to her overall appearance. She'll look great, and I'll be really proud of her.

NigelR32 wrote:Here's Wednesdays update...

She's starting to look like Bismarck now!! (I know I should be calling my Bismarck "He", but it's MY Bismarck, so she's a "She")

Definitely a "She"... there's no way I'd spend so much time on a model of a "male" machine.

Anyways, looking great!

Hi all,

Just a quick update, no pics I'm afraid as I'm over the pub!!

Tonight I realised I have not added enough material around the shaft fairings as I didn't have my template square. So.... I made some new templates that go over both sides of the hull, I can report that the rear 6" of the hull is too pointed!!

Anyway, I've added some material to bring the fairing back into place and have fitted one shaft extension. Boy oh boy did trumpeter get those bits wrong!! So wrong you need to carve away one side of them to make them closer to the actual shape. I'm starting to agree with some other guys on this forum.... Trumpeter made a mess of this!!

What, you mean to say a major kit manufcturer got the bottom of a hull wrong?!?
Impossible hahaha

NigelR32 wrote: Boy oh boy did trumpeter get those bits wrong!! So wrong you need to carve away one side of them to make them closer to the actual shape. I'm starting to agree with some other guys on this forum.... Trumpeter made a mess of this!!

http://www.youtube.com/watch?v=2Oy6DwHAi70

Good morning all,

I thought I should put up a pic to show you all what I'm talking about with regard to the removal of one whole side of the screw shaft extension..



Later on I'll post some pics of this side all finished up.

Nigel

you make a titanic work!!! trumpy have made big errors ,to the 200em ,it does not forgive
you bring the proper corrections
congrat's
Nicolas

Thanks Nicolas, it is a lot of work, but I love it really!!

Here's some pics of it all, in the rough, and you can now see the difference between my work and Trumpeter's.



Note the new positions of the holes for the screw supports.



In the next end on pic please note the new modified support on the left of the picture and also the amount of plastic removed from the end of the centre screw fairing on the left side.



Though not perfect, this is much more accurate than the kit OOB. I would like to sort the shape of the stern out, but it would be very difficult, especially considering I have the MK1 wooden deck on order.

Finally, here's a pic of the front Docking keel, nearly finished...



Thanks for stopping by, all comments welcome!!

It is a lot of work but definitely worthy it. I really want to add those docking keels to my 1/350 Revell but still do not know what is the correct plan and where to buy it.
Congrats for your effort.

tms wrote:It is a lot of work but definitely worthy it. I really want to add those docking keels to my 1/350 Revell but still do not know what is the correct plan and where to buy it.
Congrats for your effort.

Just follow Bernds thread in the scratchbuild section. His callsign is 109.

His 100th scale Bissy is the business!!!

Hi Nigel,

great work on your Bissi! I follow yours and the other�s build log on the Trumpeter model!

109 wrote:Hi Nigel,

great work on your Bissi! I follow yours and the other�s build log on the Trumpeter model!

Thanks Bernd, It's all your work...copied!!

NigelR32 wrote:

109 wrote:Hi Nigel,

great work on your Bissi! I follow yours and the other�s build log on the Trumpeter model!

Thanks Bernd, It's all your work...copied!!

No problem with me - the bill is on its way ...

Hi all,

I know it's been a while, and yes I have been busy on the Bissy

I have now completed the stern, ready for filling and smoothing out.



You may notice the original side has mostly been redone. This is due to the fact that I had the bright idea of filling the void behind with resin. Some of the resin didn't set, and eroded the plastic card which left sticky patches. I cut these patches out and re skinned local areas, but it became a never ending task. It was no good, I had to rip off all my hard work and start again!! I wont be doing that again!!!!!!!

Wait, what is that box my bismarck hull is resting on...



Yes, it's the Arizona. I will be starting on this one as soon as I get the plans through for, you guessed it, the hull mods!! I want to build the Arizona first to familiarise myself with all the MK1 design extras before I make a mistake on the Bismarck..... Watch this forum for more pics of hacked up Trumpeter Plastic!!

This is my first post as a member here and I want to compliment you on this build. I have been watching all of the Bismarck builds with tremendous interest. I have been doing initial research, read the entirety of Berndt's great hull thread. Again keeping to the focus of this first post. Just amazing and great attention to detail ... its a winner.

Thankyou very much Mr Perry,

It certainly is a labour of love and very costly in sanding sticks!!

Nigel, to justify all this work you could do a diorama of the Bismarck rolling over as she sinks in heavy seas...

Gotta say I'm impressed though! After pondering the bottom of my boat I decided I just wasn't up to the task. I can't wait to see what you end up doing above the waterline with the same kind of dedication!

Channell wrote:Nigel, to justify all this work you could do a diorama of the Bismarck rolling over as she sinks in heavy seas...

Thanks for the tip Jason.. perhaps I could motorise it, much like a rotisserie, with water splashes and all!!

Here's a quick update to show you all I'm still working on this mammoth task..



The Stern is all but finished now. I'm currently working on the main central docking keel now.



Next up are the cooling inlets...

WOW...