Re: BC Scharnhorst / 1:200 / Paper model
Posted: Fri Aug 26, 2016 11:23 am
Some new photos.
Made of wood hull, paper parts and etchings. 
The Ship Model Forum
The Ship Modelers Source
http://www.shipmodels.info/mws_forum/
BC Scharnhorst / 1:200 / Paper model
Page 4 of 5
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Mon Aug 29, 2016 7:42 am
Two last motorized rescue boats done Made of wood hull, paper parts and etchings.
Made of wood hull, paper parts and etchings. Re: BC Scharnhorst / 1:200 / Paper model
Posted: Wed Aug 31, 2016 10:54 am
Wow, those boats are amazing.
Jorge
Jorge
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Sat Sep 10, 2016 2:44 am
Thanks Jaguar
Base of the main mast done. There was a little problem to make a geometry right but finally mast was succesfuly done.
Base of the main mast done. There was a little problem to make a geometry right but finally mast was succesfuly done.
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Sat Sep 10, 2016 3:01 am
That looks too amazing! I have no words for this! This deserves more compliments! 
Aop
Aop
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Sat Sep 10, 2016 9:33 am
Yes it does incredible work.
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Thu Nov 03, 2016 5:32 am
Mate, your job is awesome. Details are amazing. I am making the same ship at the moment. And I have a question, where do you get these etchings? I have tried to make them by soldering two copper wire, but I couldn't manage it. Can you give some tips?
Aaaand this is my progress
Sorry for my bad england
http://i.hizliresim.com/vZ13Wp.jpg
Aaaand this is my progress
Sorry for my bad england http://i.hizliresim.com/vZ13Wp.jpg
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Fri Nov 04, 2016 12:51 pm
that is all very impressive modelmaking--
card models--with care and talent can be astoundingly good !
regards
Jim Baumann
card models--with care and talent can be astoundingly good !
regards
Jim Baumann
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Wed Dec 07, 2016 6:04 am
Thanks guys
Alpha: All etchings are made by myself. Made - draw. Etchings itself are made in factory, not at home
Some new progress. I draw some details to the hull like holes for suction etc. After that I made some other rangefinders and start to make detail on the deck. In this case 3 barbette.
Alpha: All etchings are made by myself. Made - draw. Etchings itself are made in factory, not at home
Some new progress. I draw some details to the hull like holes for suction etc. After that I made some other rangefinders and start to make detail on the deck. In this case 3 barbette.
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Tue Dec 13, 2016 4:38 pm
Bridges with possition lights
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Wed Jan 04, 2017 11:17 pm
There is gorgeous, and there is gorgeous. This is the latter
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Sun Feb 19, 2017 12:59 pm
Some news - 24 rescue boats. Made of resin, etchings and paper. One of them has 7 parts.
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Tue Feb 21, 2017 3:42 am
Fantastic build, keep it coming!
How did you find a proper arrangement for all the underwater hull openings? As far as I know, no plans for this have survived. Did you adapt a Bismarck/Tirpitz pattern to your Scharny?
Happy modelling ~ Olaf!
How did you find a proper arrangement for all the underwater hull openings? As far as I know, no plans for this have survived. Did you adapt a Bismarck/Tirpitz pattern to your Scharny?
Happy modelling ~ Olaf!
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Tue Feb 21, 2017 9:57 am
Hi Olaf
Thanks
Holes in the hull were made by WOWS hull-texture skin for Scharnhorst. As you wrote - there are no plans for it, have only hull plan for Tirpitz, where the all holes are. But here I used this texture from 3D model. 3D model is really good - I compared it with plans and it has good quality. So I hope that its hull is +- realistic too. Have no idea where they found it if at all. But in the end it looks quite better than only monolithic red colour. It is only one thing what I made without regular plans - but with my knowladge about KM
In final look they are mainly at the bottom of the hull so If you look from the top you will see only red hull But as I wrote - I am not proud that I made it without regular plans.
Thanks
Holes in the hull were made by WOWS hull-texture skin for Scharnhorst. As you wrote - there are no plans for it, have only hull plan for Tirpitz, where the all holes are. But here I used this texture from 3D model. 3D model is really good - I compared it with plans and it has good quality. So I hope that its hull is +- realistic too. Have no idea where they found it if at all. But in the end it looks quite better than only monolithic red colour. It is only one thing what I made without regular plans - but with my knowladge about KM
In final look they are mainly at the bottom of the hull so If you look from the top you will see only red hull
But as I wrote - I am not proud that I made it without regular plans.Re: BC Scharnhorst / 1:200 / Paper model
Posted: Tue Feb 21, 2017 2:54 pm
Absolutely superb!
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Wed Feb 22, 2017 11:25 am
Thanks
Some pictures of my next project after Scharnhorst? Maybe?
I do it when I am away from home. Do someone know what ship is it? 
It is historical "reconstruction" of my favourite ship
Some pictures of my next project after Scharnhorst? Maybe?
I do it when I am away from home. Do someone know what ship is it? It is historical "reconstruction" of my favourite ship Re: BC Scharnhorst / 1:200 / Paper model
Posted: Wed Feb 22, 2017 4:36 pm
Hi Stefino!
Is it a german O-Klasse battlecruiser? I�m really curious! Where did you get the plans?
Best regards!
Joachim
Is it a german O-Klasse battlecruiser? I�m really curious! Where did you get the plans?
Best regards!
Joachim
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Thu Feb 23, 2017 2:12 am
Nope, but you are so close It is bigger than O-class 138,5 cm long at 1:200 scale
There are no plans. Only simple sketches so it will be somethink like german ships puzzle I know what shapes does it have and details will be made by my knowladge about KM. It will be based on Bismarck/Tirpitz construction In WOWS there are 2 ships what represent this class but I have some reservation to them.
It is bigger than O-class 138,5 cm long at 1:200 scale There are no plans. Only simple sketches so it will be somethink like german ships puzzle
I know what shapes does it have and details will be made by my knowladge about KM. It will be based on Bismarck/Tirpitz construction In WOWS there are 2 ships what represent this class but I have some reservation to them. Re: BC Scharnhorst / 1:200 / Paper model
Posted: Fri Feb 24, 2017 10:57 pm
Bah, forget all conventions and just built H-44!
Seriously though, nice work all around!
Seriously though, nice work all around!
Re: BC Scharnhorst / 1:200 / Paper model
Posted: Sat Feb 25, 2017 5:08 am
My guess would be the H39. 138.5 mm in 1/200 would be 277 m in 1/1, which is the length of H39. The ship in the WoWs picture is the Friedrich der gro�e, which as I have read from some sources was a name for one of the H-Klass ships.
Your Scharnhorst is looking great as always! It's amazing to see how much paper could do!
@Joachim, if you are interested in the O-class battlecruiser project, there are really good drawings of the ship's hull lines here, and they were possibly the original plans: viewtopic.php?f=67&t=88203
Though with these we still have little info on the upperworks.
Regards,
Aop
Your Scharnhorst is looking great as always! It's amazing to see how much paper could do!
@Joachim, if you are interested in the O-class battlecruiser project, there are really good drawings of the ship's hull lines here, and they were possibly the original plans: viewtopic.php?f=67&t=88203
Though with these we still have little info on the upperworks.
Regards,
Aop