*3D printed models* Upcoming Ship Releases

[Miguel]

Truly no bad at all for smooth fine detail in 1/200,I believed that was going to hit the $500 USD mark

[maxim]

New by SNAFU Store (Echoco) on Shapeways:

Greek fast attack craft Roussen class, 1/700, 1/350
https://www.shapeways.com/product/V7CCR ... arketplace

SNAFU also has new British naval helicopters in 1/700 and 1/600: Merlin HC.4 and Wildcat:
https://www.shapeways.com/product/H9D27 ... d=90620325
https://www.shapeways.com/product/ALG9Q ... d=90465867

[Haijun watcher]

A 3d-printed 1/700 British Colossus class light fleet carrier is now available from the Shapeways vendor C.O.B. Constructs and Miniatures, for those unwilling to wait for IHP's announced Colossus class CVL kit, or want a cheaper option than the L'Arsenal resin kits of the class.

As suggested in the embedded link above, one can presumably also use this to make Colossus class CVLs in non-British service, such as the first Canadian aircraft carrier HMCS Warrior.

[maxim]

A 1/700 model of the Canadian version of the Type 26 by Dutch Fleet Naval Miniatures on Shapeways:

https://www.shapeways.com/product/ZVNL2 ... arketplace

It is also available in a proper printing quality not only White Natural Versatile Plastic.

[Haijun watcher]

A 1/700 model of the Canadian version of the Type 26 by Dutch Fleet Naval Miniatures on Shapeways:

https://www.shapeways.com/product/ZVNL2 ... arketplace

It is also available in a proper printing quality not only White Natural Versatile Plastic.

YES! I've been waiting for this version of the Type 26! I was annoyed that maybe those who wanted the Canadian version had to modify British Type 26 version from Dutch Fleet Naval Miniatures.

The distinct Australian Type 26/Hunter class frigate version (with the Aussie Kangaroo marking as you can see in the pic) is also available from DFNM.

[Captain Morgan]

A 3d-printed 1/700 British Colossus class light fleet carrier is now available from the Shapeways vendor C.O.B. Constructs and Miniatures, for those unwilling to wait for IHP's announced Colossus class CVL kit, or want a cheaper option than the L'Arsenal resin kits of the class.

As suggested in the embedded link above, one can presumably also use this to make Colossus class CVLs in non-British service, such as the first Canadian aircraft carrier HMCS Warrior.

The COB models are White Natural Versatile Plastic which isn't very good and they are rescales of 1/1800 models so they lack detail. They were meant for gaming not display. While you would save money you would have a very crude looking model.

[Timmy C]

A 1/700 model of the Canadian version of the Type 26 by Dutch Fleet Naval Miniatures on Shapeways:

https://www.shapeways.com/product/ZVNL2 ... arketplace

It is also available in a proper printing quality not only White Natural Versatile Plastic.

YES! I've been waiting for this version of the Type 26! I was annoyed that maybe those who wanted the Canadian version had to modify British Type 26 version from Dutch Fleet Naval Miniatures.

The distinct Australian Type 26/Hunter class frigate version (with the Aussie Kangaroo marking as you can see in the pic) is also available from DFNM.

Don't get too excited - the CSC design is still being finalized and existing models and CGI graphics don't necessarily reflect what would come out when the design process is completed later this year.

[maxim]

And there could be significant changes between the design and the completed ship, see e.g. USS Zumwalt.

[maxim]

New by Dutch Fleet Naval Miniatures on Shapeways in 1/700, 1/600, and 1/350:

Omega frigate by Damen
https://www.shapeways.com/product/FPVP479AX/omega-frigate-rnln?optionId=95695496&li=marketplace

It would be cool, if this design will be realized for some navy.

[maxim]

New models by Dutch Fleet Naval Miniatures in 1/700, all based on the hull of the S class (Kortenaer class):

Dutch frigate of the Kortenaer Class (Early)
https://www.shapeways.com/product/37BRL ... d=99947151

Dutch frigate of the Kortenaer Class (Late)
https://www.shapeways.com/product/29H89 ... =100094745

Dutch frigate of the Jacob van Heemskerck Class (Early)
https://www.shapeways.com/product/DXQ6U ... d=99976203

Dutch frigate of the Jacob van Heemskerck Class (Late)
https://www.shapeways.com/product/9VBYF ... =100099685

Greek frigate of the Elli Class (F450-F451)
https://www.shapeways.com/product/KTKQY ... =100279465

Greek frigate of the Elli Class Frigate
https://www.shapeways.com/product/94ELA ... =100279978

Does someone has experience with one of the offered materials? Multi Jet Fusion Plastic Gray PA12?

[maxim]

Here a photo of an early S class (Kortenaer) and early L class (Jacob van Heemskerck) by Dutch Fleet Naval Miniatures (see above):

[maxim]

Another new model by Dutch Fleet Naval Miniatures in 1/700, 1/600, and 1/350:

Israeli Eilat (Sa'ar 5) class corvette
https://www.shapeways.com/product/LZFPN ... arketplace

[maxim]

New by Dutch Fleet Naval Miniatures on Shapeways:

Canadian offshore patrol vessel (icebreaker) Harry DeWolf
https://www.shapeways.com/product/JHJ4X ... =105747828

[Joe Ellias]

3D Designer Bills Models just released the General Dynamics version of the FFG(X)

[maxim]

New by Masters of Military on Shapeways in 1/700:

Canadian frigate HMCS DDH 206 Saguenay, 1965 (as converted with hangar for Sea King)
https://www.shapeways.com/product/LM395 ... =112605162


https://en.wikipedia.org/wiki/HMCS_Saguenay_(DDH_206)

[maxim]

and Master of Military on Shapeways released the next "Cadillac destroyer" in 1/700 (and 1/1250):

Canadian frigate HMCS Annapolis DDH-265, 1965
https://www.shapeways.com/product/GBWFH ... arketplace


https://en.wikipedia.org/wiki/Annapolis-class_destroyer

[maxim]

Next Cadillac Destroyer by Master of Military in 1/700 and 1/1250:

Canadian frigate DDH-265 HMCS Annapolis (post DELEX Refit)

https://www.shapeways.com/product/YZVPT ... arketplace


https://commons.wikimedia.org/wiki/File ... DH-265.jpg

[maxim]

and we continue with Canadian Cadillac Destroyers by Masters of Military (1/700, 1/1250):

HMCS DDE 257 Restigouche 1958
https://www.shapeways.com/product/D4RYRX9SZ/hmcs-dde-257-restigouche-1958-1-700?optionId=114046927&li=marketplace

This is the first ship of seven ships of the Restigouche-Klasse in her original fit. Compared to the earlier St. Laurent class the Restigouche class has a higher bridge and a British 3" twin turret (the same turret as was used for the British cruisers of the Tiger class).

Here her sistership Chaudi�re:


https://commons.wikimedia.org/wiki/File:HMCS_Chaudiere_1964.jpg

[maxim]

and also new by Masters of Military in 1/700 and 1/1250:

Canadian frigate HMCS DDE 257 Restigouche IRE-Refit (modernised with new lattice mast, ASROC, Mk 32 torpedo tubes and VDS)
https://www.shapeways.com/product/28DMC ... arketplace


https://commons.wikimedia.org/wiki/File ... _1983.JPEG

[maxim]

Master of Military released the missing Cadillac Destroyers in 1/700 and 1/1250:

HMCS Restigouche DDE 257 Golf Refit 1990 (similar was Terra Nova)
https://www.shapeways.com/product/LQK44 ... arketplace


https://en.wikipedia.org/wiki/File:HMCS ... _1992.JPEG


HMCS Mackenzie DDE 261
https://www.shapeways.com/product/YQ8CC ... arketplace


https://commons.wikimedia.org/wiki/File ... _1992.JPEG


New by SNAFU on Shapeways in 1/700:

Submarine Klasse 214 (Type 214) (Greek, Portuguese, South Korean and Turkish Navy, waterline model)
https://www.shapeways.com/product/GUXAB ... arketplace

Agusta-Bell 212 ASW helicopter (Greek, Iranian, Italian, Peruvian, Spanish, Turkish and Venezuelan Navy)
https://www.shapeways.com/product/TRFTV ... arketplace

MBB Bo-105 helicopter (Chilean, Columbian, Indonesian, Mexican, and Uruguayan Navy, Canadian Coast Guard)
https://www.shapeways.com/product/ZA24R ... arketplace