Page 1 of 7
TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Sat Sep 09, 2023 4:07 am
by jmarc
HI !
I been working for a while on this project and tough that I could share my WIP with you , do not hesitate if you have any question , So far I'm almost true with the basic work on the coning tower ,If you like to view the work I ave done so far , I have set-up and GOOGLE page for the project , here the direct link:
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
Hope youl'le enjoy the build
Jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Sat Sep 09, 2023 7:42 am
by mick

great work
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Sat Sep 09, 2023 7:56 am
by jmarc
mick wrote:
great work
Thank youuuuuuuu !
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Sep 11, 2023 5:47 am
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(SEPT 11th)...Today ,I glued the tube in the coning tower and painted the damage crack on the clear wall ! !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Sun Sep 24, 2023 2:41 am
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(SEPT 18th)...Today ,I continue to work on the last detail of the coning tower !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Sep 25, 2023 4:40 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(SEPT 25th)...Today ,I continue to work on the last detail of the coning tower !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Oct 02, 2023 3:16 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(OCT 02nd)...Today ,I painted and glued into place the pipe done last week !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Wed Oct 11, 2023 1:25 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(OCT 10th)...Today ,I painted the clear side of the tower just need to clean it up !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Oct 16, 2023 2:50 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(OCT 16th)...Today ,I clean the clear section and gave it a coat of future , I also continue the seat that will be display around the gun fence and finally cut from there sprue the gun parts !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Tue Oct 24, 2023 6:08 am
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(OCT 23th)...Today ,I fill up the gap under the tower and continue scratch the wooden seat for the gun fence !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Tue Oct 24, 2023 11:30 am
by SG1
Jmarc, That's an incredible amount of details: I dig the work you've done so far, will continue to follow with interest as i have an ongoing parallel project (on standby at the moment) focusing on U 48 in a muuuuch smaller scale

. Keep up the excellent work!
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Tue Oct 24, 2023 12:23 pm
by mick
good progress

Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Thu Nov 02, 2023 4:35 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(OCT 30th)...Today ,I sanded the gap under the tower and painted it , glued the seat wooden board and done the railing wire holder and painted it !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Nov 20, 2023 5:41 pm
by jmarc
(NOV 20th)...Today ,I completed the side pipes and glued them into place , also done few more pipes to be place later on in the conning tower finally started the machine gun mount !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Nov 27, 2023 2:42 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(NOV 27th)...Today ,I glued the extra pipes in the conning tower and also started the FA-330 plate form !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Dec 11, 2023 3:14 pm
by jmarc
(DEC 11th)...Today ,I done the last detail on the pipes , completed the basic work on the FA-330 plate form and gave it a coat of gray finally start to add the holding post for it !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Mon Dec 18, 2023 5:14 pm
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(DEC 18th)...Today ,I glued the plate form on the railing and continue the modification of the machinegun base post !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Tue Jan 09, 2024 7:23 am
by jmarc
Thank you for following the 'WIP' on this project ,it's quite appreciated !
(JAN 08th)...Today ,I painted the /dry-brush the previously work done on the tower !
If you like to see the complete WIP on this project , just follow this Google link :
https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6
If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link :
https://goo.gl/photos/PM4EWugGVMb8Fzgm9
Enjoy !
jmarc
Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Wed Jan 10, 2024 3:12 am
by SG1
Excellent superdetailing of the tower Jmarc.
I love the gyro pad, top notch work.
Question: were type VIIs ever equipped with FA330s? As far as i know only type IX were for a matter of space and type of combat patrols. Anyway, there's a very nice research thread about the platform here:
https://models.rokket.biz/index.php?top ... 0#msg23450 that could interest you.
keep this up!
Cheers,
SG
PS the superdetailing of the conning tower interiors seen on your blog left me speechless.

Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE
Posted: Wed Jan 10, 2024 7:27 am
by jmarc
Glad you like it... Here a pic of the FA-330 that I have done in the past , that will go on it
Enjoy !
Jmarc