My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Moderators: MartinJQuinn, JIM BAUMANN, Jon, Dan K

User avatar
Neptune
Posts: 2466
Joined: Sun Mar 13, 2005 11:51 am
Location: Belgium

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by Neptune »

Somebody should punish you for that :heh:

Great job, you raised the bar on plane detailing! Slightly too much wash for those panel lines, but I haven't ever done anything like this myself, so I'll forgive you :big_grin:

Anyhow great work which requires a lot of patience :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:
The merchant shipyard
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

After a much needed break, I'm back to finishing up the airwing, specifically wrapping up VF-41.

Finished the last two Cats with open canopies. I ran out of GHQ weapons so I'm stalled for another week until I can get the other two sets needed to complete the ordinance on the F-14's. Only three more birds to finish and I can start the process of gluing everything down topside, and laying out the crew and vehicles.

-Blake

Crummy iPhone photo again.
Attachments
aces.JPG
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
Dave from Downunder
Posts: 240
Joined: Tue Oct 07, 2008 8:45 pm
Location: Sydney, Australia

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by Dave from Downunder »

You seriously suggesting that these are 1/350 - i have seen 1/72 with much less detail.
I think these are unbeleivable :thumbs_up_1:
1/350 Slipway:
USS John C Stennis

Stennis CBG 2002:

Operational:
CG73 USS Port Royal
DDG73 USS Decatur
CG57 USS Lake Champlain
FFG33 USS Jarrett

Planned
DD967 USS Elliott
USS Salt Lake City (SSN-716)
USS Jefferson City (SSN-759
User avatar
Goodwood
Posts: 1257
Joined: Mon Nov 11, 2013 11:01 pm
Location: Detroit area

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by Goodwood »

Incredible detail at that scale, mate! As someone who is much better at aeroplane modeling than ship modeling, I can appreciate how difficult it is to get that kind of depth on such a...tiny...aircraft. Bombs and AA missiles at that scale? Madness!

Dave may be on to something... :wave_1:
Sean Nash, ACG (aircraft camo gestapo)

On the ways:
1/200 Trumpeter HMS Nelson
1/700 Tamiya USS Yorktown CV-5

In the stash:
1/35 Italiari PT-109
1/35 Tamiya "Pibber" Patrol Boat
1/350 Trumpeter USS Yorktown CV-10
KevinYoung
Posts: 285
Joined: Sun Jun 02, 2013 6:54 am

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by KevinYoung »

Beautiful work on them Tomcats. Kevin
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

Dave, Sean and Kevin, many thanks guys :thumbs_up_1:

At roughly 6-7 hours per Cat to complete, the work is mind numbing :eyes_spinning: Thank God there's only 10 of them.
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
DWD
Posts: 365
Joined: Sat Oct 27, 2012 12:37 am
Location: Idaho

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by DWD »

Great looking build Blake. Those are some sweet Cats too!!! I was wondering how the GHQ ordanance would look on them. Can't wait to see your finished build. :thumbs_up_1:
Doug

Currently building:
Tamiya 1/350 CVN-65 USS Enterprise 2001
viewtopic.php?f=59&t=120496

http://modelshipgallery.com/gallery/use ... index.html
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

Thanks Doug! :thumbs_up_1:

Had to go back and fix a couple of missing things on the first two like the red warning stripes behind the wing bags and the dark grey missile stripe on the AIM-9s. If you look at the photos of the JR and Aces Tomcats from three pages back, the red warning stripes are much longer on the Aces' backs that the JR's.

Another thing to note, again the Starfighter decals are a bit inaccurate (but boy I am still glad that somebody is making decals for these). The roundels should be small and low-vis, not the high-vis roundel that came with the sheet. I'm okay with that as I'm just being nitpicky at this point. Believe me, I'm tired of going back and fixing things :lol_1:

Seats, RIO panel and pilot heads done, decals done, canopies are painted, got to shoot Dullcoat, spine aerial and just waiting on the GHQ sets and we're done with the airwing. The Dullcoat as you can see from the photo above, really tones down the wash a good bit. Two of these Cats will be taxiing out towards the Waist Catapults.
aces1.JPG
We're almost there!!!!

Image
Last edited by NWarty on Thu Feb 06, 2014 11:44 pm, edited 1 time in total.
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

300+ hours for the topside Airwing....holy carp...the aircraft are finally done...

Image
Image
Image
Image
Image
Image

Image
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
LE BOSCO
Posts: 2261
Joined: Thu Aug 27, 2009 11:05 am
Location: Paris France

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by LE BOSCO »

NWarty wrote:......300+ hours .....
hello Blake

300+ hours OK , may be! but for a extraordinary results,I have never seen such a aircraft fleet also convincing at this scale :woo_hoo: :woo_hoo: :woo_hoo: it is very simple, it looks like at of 48em :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:
I do not know if my "English" happens to translate my enthusiasm....... but you make a model worthy of a museum, a true masterpiece
"bravo l'artiste "
cheers
nicolas
User avatar
Goodwood
Posts: 1257
Joined: Mon Nov 11, 2013 11:01 pm
Location: Detroit area

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by Goodwood »

I think Nick may be onto something. That is flat-out extraordinary aircraft detailing at that scale. Really makes the whole thing come together in an organic, living flight deck.
Sean Nash, ACG (aircraft camo gestapo)

On the ways:
1/200 Trumpeter HMS Nelson
1/700 Tamiya USS Yorktown CV-5

In the stash:
1/35 Italiari PT-109
1/35 Tamiya "Pibber" Patrol Boat
1/350 Trumpeter USS Yorktown CV-10
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

Nicolas, merci beaucoup! Your english was just fine sir and many thanks! :thumbs_up_1:

Sean,
Thanks man, I'm getting ready to start putting crew members down to have a party on the flight deck :big_grin:

Now the process starts of nitpicking, fixing a few flaws and wrapping her up, gluing down the topside, whip antennas, some extra ladders, an extra decal for efficiency award, etc. Next photo post will most likely be near the end of this build.
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
KevinYoung
Posts: 285
Joined: Sun Jun 02, 2013 6:54 am

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by KevinYoung »

That is an awesome build right there truly incredible work and Neil Patrick Harris ? breakdown makes me laugh :big_grin: .regards Kevin
anyahajobuzi
Posts: 374
Joined: Mon Oct 19, 2009 2:56 am
Location: Whitehorse, Yukon, Canada, North pole

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by anyahajobuzi »

So this is what a Nimitz looks like WITH aircraft on it???!!
Well, this is what a Nimitz looks like with an exceptionally detailed airwing!!!!! Very nice work!!!!! Your work is inspiring me to try to better than I planned! Damn you for setting the bar so high!

I am just super-busy with my USS Vincennes, and I see your next ship is a destroyer?! Can't wait!

Cheers: Laci
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

KevinYoung wrote:That is an awesome build right there truly incredible work and Neil Patrick Harris ? breakdown makes me laugh :big_grin: .regards Kevin
Justin Timberlake :big_grin:

Laci,
Many thanks sir and can't wait to see your progress on the flight deck :thumbs_up_1:
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

Hey! The party's on the flight deck!

After a much needed break, I glued in the catwalk braces and started placing the flight deck crew. All aircraft on the topside are now glued down! Not shown in this pic, but the port antennas are now glued into place also.

Image
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
LE BOSCO
Posts: 2261
Joined: Thu Aug 27, 2009 11:05 am
Location: Paris France

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by LE BOSCO »

Hello Blake

I'm just speechless ......this is simply beautiful :worship_1:
Cheers
Nicolas
User avatar
NWarty
Posts: 232
Joined: Wed Aug 04, 2010 1:20 pm
Location: Olympia, WA

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by NWarty »

Nicolas,
Many thanks my friend.


Spent today nitpicking and finalizing the port and starboard whip antennas, built a couple more boxes, nitpicked some more. Lastly, Ryan generously donated the bow netting from his stash and I was able to completely rebuild it.


And she's done....my God, I never thought I would say that. It's done...

I'll move to the completed builds section with full pictures, write up and what not once the display case arrives in a couple of weeks.


Holy crap, it's done.


Image
~Blake
Completed:
1:350 Trumpeter CVN-68 Nimitz, "Eagle Claw"

Planned: Nimitz fixes and sprucing up
User avatar
DWD
Posts: 365
Joined: Sat Oct 27, 2012 12:37 am
Location: Idaho

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by DWD »

CONGRATULATIONS!!!! She looks great. I look forward to the photo finish!
Doug

Currently building:
Tamiya 1/350 CVN-65 USS Enterprise 2001
viewtopic.php?f=59&t=120496

http://modelshipgallery.com/gallery/use ... index.html
User avatar
Goodwood
Posts: 1257
Joined: Mon Nov 11, 2013 11:01 pm
Location: Detroit area

Re: My first 1:350 build, Trumpeter CVN-68 USS Nimitz

Post by Goodwood »

Don't forget to include a picture of Data fist-pumping and saying "Yes!" from ST: Generations!

And then when he says "...oh $#@&!"
Sean Nash, ACG (aircraft camo gestapo)

On the ways:
1/200 Trumpeter HMS Nelson
1/700 Tamiya USS Yorktown CV-5

In the stash:
1/35 Italiari PT-109
1/35 Tamiya "Pibber" Patrol Boat
1/350 Trumpeter USS Yorktown CV-10
Post Reply

Return to “Completed Models”