The Ship Model Forum

by **Dan K** » Mon Sep 04, 2023 10:48 am

Congrads, Karih!!!

by **karih** » Mon Sep 04, 2023 2:38 am

We had here in Lahti, Finland a Model Show 2.9.2023. I took both IJN Kagero & IJN Tone there and got a lot of positive feedback. Kagero got a Honorary Mention for its rigging, but Tone hit the jackpot by winning its class "Watercraft" and was voted the split second among 400 models by the fellow modellers. After hard work it is always nice to get some recognition

! Once again, special thanks to Dan K for your invaluable tips

!

by **karih** » Fri Sep 01, 2023 11:10 am

Thank you all for your kind words! Well appreciated since one needs a bit of encouragement with these ship monsters :destroyer:

I actually have the crew models ready, but will probably use them later on (maybe Musashi or Yahagi)...

by **SG1** » Thu Aug 31, 2023 12:53 am

Outstanding. well worth the time spent on it. An amazing amount of details and perfect weathering (i love the hull

). The seaplane is a jolly little masterpiece too. Bravo!
Any plans to add some crew?

by **Dan K** » Wed Aug 30, 2023 9:30 pm

Agreed, excellent results!

This was a exhausting project but I guess that is the only way to reach some kind of quality level.

So true.

Most of the time it was fun (almost),

Also, so very true

by **G. Shoda** » Mon Aug 28, 2023 12:50 pm

Congratulations! Excellent results on your Tone project.

by **karih** » Mon Aug 28, 2023 9:23 am

Finally, it is finished!

This was a exhausting project but I guess that is the only way to reach some kind of quality level. Most of the time it was fun (almost), but for some reason I struggled with the rig. I tried several different products (AK interactive, threads for fly fishing etc.) but nothing seem to work well

. Well, as before, more practise... Overall, I am pretty happy with the end result, but I still need to improve the "cleanliness" (glue marks, accurate joints etc.). This one and the previous IJN "Kagero" will be presented in Lahtis Model Show the 2nd of Sept. Interesting to hear what kind of feedback will one get...

I had already decided to stick with these ship models, but after this 4th model, I think I need something "lighter". I am checking if I could find a nice car model. I just saw on TV the movie "Ford v. Ferrari" (Le Mans 66) and was really excited by the story of great Ken Miles. So, probably it will be Ford GT40... After that I might have the courage to tackle the mighty "Musashi".

But, here are the final photos (or actually during photoshooting, I noticed that one of the rope ladders had disappeared, so will have to fix that. Carpet monster strikes again!

):

by **Richard OMalley** » Thu Jun 15, 2023 2:53 pm

Looking good ,

by **Dan K** » Wed Jun 14, 2023 6:01 pm

Have you ever tried Infini's PE AA guns?

Not yet, but I'm using a set now for a Kagero build. So, the opportunity presents itself..........

by **karih** » Fri Jun 09, 2023 10:52 pm

Dan K wrote:Great work.

It was really a struggle with the Veteran kits (twin 25 mm AA)
Hence, my preference for the FineMolds version.

Thanks Dan!

Have you ever tried Infini's PE AA guns? They seem to have high quality products, though in some cases overly small & detailed.

by **Dan K** » Fri Jun 09, 2023 2:55 pm

Great work.

It was really a struggle with the Veteran kits (twin 25 mm AA)

Hence, my preference for the FineMolds version.

by **karih** » Fri Jun 09, 2023 11:05 am

I have also been working with the aeroplanes. I replaced the Tamiya planes with the ones from the Hasegawa Japanese Navy Ship-borne seaplane set A, because they have more details (eg. transparent canopy etc.). Painting and decal setting was a struggle due to the small size. Since I do not have proper oils, I did the weathering with AK Salt streaks for the J.N.Grey surfacs and Tamiya XF-57 Buff for the XF-70 Dark Green areas. I think it looks pretty decent though it is difficult to keep it subtle. I also added some exhaust marks and tried to simulate chipping with XF-16 Flat Aluminium (engine cowl, pontoons, wing leading edges and wing surface beside the canopy).

by **karih** » Fri Jun 09, 2023 10:54 am

Managed to finish the AA guns. It was really a struggle with the Veteran kits (twin 25 mm AA), I just had to skip the smallest parts because I did not have the eyes/steady hand for those. However, the work with the single 25 mm AA started to go better towards the end. Since I was worried that if I put the guns on top of a masking tape (and blow them all around the room), I glued them directly onto the base plate without removing the plate from the PE fret. This way I managed to paint the guns without any damage. Maybe there is a better way to do this...?

by **karih** » Wed Jun 07, 2023 10:59 am

Hi all,

Sorry for the long pause, during spring and early summer we have had fairly nice weather, so modelling has not been an option. However, there were some colder days and even some snow, so I ad the opportunity to put together the catapults, which were actually surprisingly easy.

Also finished the assembly of lifeboats (except the two foremost ones) which look pretty decent. Had to improvise a bit with the fastening straps.

And finally had the courage to tackle the single AA guns (23 altogether

)... Wonder how am I going to paint these?

by **karih** » Mon Mar 27, 2023 1:44 am

Dan K wrote:Very nice work, Kari.

I think that Fine Molds is the best compromise for me: fairly easy to build and enough details for my eyes.
Exactly my conclusion while building Hiryu. 90-95%+ of the effect for a tenth of the work. If that.

I had high hopes for the Veteran Models, but those small resin parts are extremily fragile and the whole setup is not to my liking.
My experience as well

Glad to hear that it was not only my poor eyes & clumsy hands why I preferred Fine Molds

. Though in general I like the PE detail a lot, I think that some of the manufacturers for PE stuff have gone a bit too far with those tiny details. Some of them cannot be seen without a magnifying glass and they give little extra to a ship model in 1/350 th scale. It seems like there is a competition on whoever can have the most of PE parts in their sets.

by **Dan K** » Sun Mar 26, 2023 5:24 pm

Very nice work, Kari.

I think that Fine Molds is the best compromise for me: fairly easy to build and enough details for my eyes.

Exactly my conclusion while building Hiryu. 90-95%+ of the effect for a tenth of the work. If that.

I had high hopes for the Veteran Models, but those small resin parts are extremily fragile and the whole setup is not to my liking.

My experience as well

by **karih** » Sun Mar 26, 2023 10:23 am

With this model, I wanted to test different manufacturers for the AA guns. So I have products from Fine Molds VZ7 (Type 96 triple 25 mm), Veteran Models VTW35046 (Type 96 twin 25 mm) and Epic Hobby EH-PA 35001 (Type 96 single 25 mm). I think that Fine Molds is the best compromise for me: fairly easy to build and enough details for my eyes. I had high hopes for the Veteran Models, but those small resin parts are extremily fragile and the whole setup is not to my liking. I have not started the single 25 mm guns which are pure PE stuff with brass barrels. So that should be fun (23 pieces to be built)!

Finally, some work with main arnament and boats. Brass barrels (Master SM-350-030 IJN Mogami) definetily gives an extra look for the guns. I will add some PE parts for the different boats and already replaced boat rails with PE produvts from Tamiyas Japanese Navy Utility Boat set. I also added some aeroplane spare parts (wings and pontoons) which will give a nice touch together with those PE racks. Strange that Tamiya has not included these in the set. Luckily I have Hasegawas set for IJN seaplanes which actually has better quality planes eg. with transparent canopy etc.

by **karih** » Sun Mar 26, 2023 10:01 am

Some more work from the dark winter days:

Had to drill more than 300 portholes in the hull and fill them with Krystal Klear. Not difficult but took some work. Did not want to use the PE portholes because I feel that they are too pronounced.

The main bridge has progressed slowly due to the fact that it has two colours (grey and linoleum brown), so was not really sure on how to build things is correct order. And of course, lots of PE stuff envolved. I used transparent polystyrene sheets for the bridge windows (PE frames) which was in this case far better than Krystal Klear.

Also, managed to almost finish the two masts. Rigging with AK Bobbin products to be done later on.

by **Dan K** » Mon Mar 06, 2023 3:38 pm

There has been some discussions regarding the size of the linoleum coverage. I could not make a definite decision so I painted the area beneath the boats and some smaller areas beside the AA guns with grey (to show metal deck).

Smart compromise, and probably close to correct.

by **karih** » Sun Mar 05, 2023 2:29 am

pascalemod wrote:Liking the lower hull weathering, muckline, etc. Like on my Mikasa once, I did the same thing. Looks good!

Thanks

! Still a long way to go...

The Ship Model Forum

1/350th Tamiya IJN "Tone"

Post a reply

Expand view Topic review: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"

Re: 1/350th Tamiya IJN "Tone"