Anchor chain

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
BBCode is ON
[img] is ON
[url] is ON
Smilies are OFF
Topic review
   

Expand view Topic review: Anchor chain

by jgrease » Tue May 29, 2007 1:15 pm

Holy mackrel! It's a MODEL! You know which chain is the best? The one you are happy to add to your project! Who cares how accurate it is- this is a hobby to enjoy. Relax...

Re: Anchor chain

by bucketfoot-al » Sat May 26, 2007 9:55 pm

amiers wrote:how do i work out what size chain i need for a 1/350 ship? i dont get the links per inch thing
Find a photo of the front part of the ship you are making. Count the links between the holes on the deck. Than measure the distance on your model with a ruler. Divide and you got the number of links per inch you need to get.

I worked this method out by counting the links on the deck of the 1/100 Yamato model photos (Kure, Japan).

If you can find a close-up photo of the ship you're making, this is a fool-proof method to get it right.

by Ron Smith » Tue May 08, 2007 2:09 pm

bucketfoot-al wrote:
Actually, since I've gotten the right size chain on order (see post above), I will most certainly make sure it fits - even if I have to widen the hole just a wee bit.....
That's the best way to do it. On some projects you get lucky and there's a cover that goes over the chain locker entry, then you can oversize the hole a little and the cover hides it. US DD's are a case in point.

by bucketfoot-al » Tue May 08, 2007 10:30 am

Ron Smith wrote:
RNfanDan wrote:
What, so the holes can be reamed overscale to fit overscale chain...? What is this, Lindberg??? :heh:
Actually, a lot of times holes for chain are molded too small. *Assuming* he scaled the chain correctly if the holes are too small they need to be reamed to scale. Typically most manufacturers mold the chain locker entries too small for scale chain.....generally they get the hawse pipes close.........well except Trumpeter, they haven't yet figured out what hawse pipes are..................
Actually, since I've gotten the right size chain on order (see post above), I will most certainly make sure it fits - even if I have to widen the hole just a wee bit.....

by Ron Smith » Tue May 08, 2007 12:21 am

RNfanDan wrote:
Ron Smith wrote:
Ummmmm, that's why they make drills and needle files.

What, so the holes can be reamed overscale to fit overscale chain...? What is this, Lindberg??? :heh:
Actually, a lot of times holes for chain are molded too small. *Assuming* he scaled the chain correctly if the holes are too small they need to be reamed to scale. Typically most manufacturers mold the chain locker entries too small for scale chain.....generally they get the hawse pipes close.........well except Trumpeter, they haven't yet figured out what hawse pipes are..................

by RNfanDan » Mon May 07, 2007 11:17 pm

Ron Smith wrote:
Ummmmm, that's why they make drills and needle files.

What, so the holes can be reamed overscale to fit overscale chain...? What is this, Lindberg??? :heh:

by bucketfoot-al » Mon May 07, 2007 9:23 pm

Ron Smith wrote:
bucketfoot-al wrote:
Then I ordered a couple of 12-links per inch blackened brass chains from an Internet ship store. Keep your fingers crossed that they fit in the smaller of the two holes on the deck!!!!!
Ummmmm, that's why they make drills and needle files.

Ha Ha! Very Funny! Ha Ha!

Image

by Ron Smith » Mon May 07, 2007 3:07 pm

bucketfoot-al wrote:
Then I ordered a couple of 12-links per inch blackened brass chains from an Internet ship store. Keep your fingers crossed that they fit in the smaller of the two holes on the deck!!!!!
Ummmmm, that's why they make drills and needle files.

by bucketfoot-al » Sun May 06, 2007 7:31 pm

PetrOs wrote:I mean the width of the link...
I viewed a close-up of the foredeck of the 1/10 scale Yamato at the Kure Yamato Museum. I counted about 60 chain links on the foredeck, which worked out to about 11.5 links per inch on the Nichimo kit.

Then I ordered a couple of 12-links per inch blackened brass chains from an Internet ship store. Keep your fingers crossed that they fit in the smaller of the two holes on the deck!!!!!

by PetrOs » Sun May 06, 2007 7:06 am

I mean the width of the link...

by bucketfoot-al » Sun May 06, 2007 5:22 am

PetrOs wrote:For my 1/350 yamato Im using 2 mm one, and it looks "right". For 1/200 I'd use 3-3.5 mm one.
When you say 3-3.5 millimeters do you mean that ought to be the length of each link?

by PetrOs » Sun May 06, 2007 5:09 am

For my 1/350 yamato Im using 2 mm one, and it looks "right". For 1/200 I'd use 3-3.5 mm one.

by bucketfoot-al » Sun May 06, 2007 4:56 am

PetrOs wrote:I usually just use the thickness as criterion. Between 1 and 3 mm depending on the ship's size..
How about an anchor chain for the 1/200 Nichimo Yamato? I need to get one because my display model did not come with it....

by PetrOs » Sat Mar 10, 2007 4:55 am

I usually just use the thickness as criterion. Between 1 and 3 mm depending on the ship's size..

Anchor chain

by amiers » Fri Mar 09, 2007 7:50 pm

how do i work out what size chain i need for a 1/350 ship? i dont get the links per inch thing

Top