The Ship Model Forum

by **russclark** » Mon Dec 03, 2012 10:38 am

thanks for the explanation dave.that makes it clear.i am going to look around the stores here to see if i can find the book.and i will check out the link.

by **Dave Wooley** » Mon Dec 03, 2012 6:21 am

russclark wrote:hi dave love your work on daring and the russian boat,the magazine you refer to is not avialable were i am .i am lost as to what you are building,there seems to be no flow.don't get me wrong i love your work ,but i can't nail done what is your main project.

Hi Russ You�re not the first to be confused. Just to explain. As you may well be aware I work for the magazine Model Boats. From time to time I full fill as part of that arrangement a full build over an extended period for the magazine as directed by the editor. Daring is part of that agreement. At present this forms the centre of focus for the work undertaken and will remain so until completion. That does not of course confine me to one single project as you may have seen progress, if not slow and preparatory is on-going with a project of my own . The Kashtan is just one small item from that new project I managed to slot in. Also as part of my work with the magazine I take in visits to events , museums and other interesting assignments all of course related in some way to model making and ships and occasionally if there is time a book but that�s another string as they say . In one way or another I have been involved with the Model Boats magazine for over 40years. When I first started I had a dark room and developed and printed all my own contact prints for the magazine then it was the only method available.
If it helps the magazine is available in Canada as it is in the US by going to :- expsmag@expressmag.com hope this goes some way in answering your question and thanks for taking interest.
Dave Wooley

by **Dave Wooley** » Mon Dec 03, 2012 5:44 am

bcreese wrote:Hi Dave, I have been following your build in model boat with great interest and so I decided to buy this semi kit from fleetscale and start my own build. I also wanted to build it because my company is a sub contract precision machinists for BAE systems and we made many components for the type 45. My question is, I would love to know where you get all the great photos of the type 45's to help you?

The photos are taken by myself and it's part of the on going work for the Model Boats magazine. For over 20 years I have been fortunate to be given access to RN and vessel of other navies as part of that arrangement. Best of luck with the build of your 45 .
Dave Wooley

by **Timmy C** » Sun Dec 02, 2012 8:17 pm

Russ, I know the Chapters in Vancouver have subscriptions for Model Boats, but I don't know about in Campbell River.

by **russclark** » Sun Dec 02, 2012 8:07 pm

hi dave love your work on daring and the russian boat,the magazine you refer to is not avialable were i am .i am lost as to what you are building,there seems to be no flow.don't get me wrong i love your work ,but i can't nail done what is your main project.

by **bcreese** » Sun Dec 02, 2012 4:48 pm

Hi Dave, I have been following your build in model boat with great interest and so I decided to buy this semi kit from fleetscale and start my own build. I also wanted to build it because my company is a sub contract precision machinists for BAE systems and we made many components for the type 45. My question is, I would love to know where you get all the great photos of the type 45's to help you?

by **Dave Wooley** » Fri Nov 04, 2011 6:04 am

boatman wrote:HI DAVE whats happening on your build as i havnt been following your build regulary as i have been as you know busy building the airwing for my nimitz
chris

Chris good to hear from you. Scratch building Daring�s hanger was only meant to be a limited exposure to that model. The remainder of the build continues in the pages of Model Boats magazine. In due course a scratch build log on a Russian Corvette will feature in MW but for now at least my attention is focused on Daring. For me it is a lesson in geometry or in tech speak the "conjunction of orthogonal plates� The Russian Corvette is a object lesson in this field of modelling so work on Daring is a learning curve. I hope!!!
Thanks for taking interest and as you are aware I am following your Nimitz build closely and with great interest.
Dave Wooley

by **boatman** » Fri Nov 04, 2011 4:09 am

HI DAVE whats happening on your build as i havnt been following your build regulary as i have been as you know busy building the airwing for my nimitz
chris

by **Dave Wooley** » Tue Oct 18, 2011 4:27 am

Hi Robbie good to hear from you . Thank you for your kind comments but also the photos of the stern . Now that's interesting , such a new addition has me thinking.

Dave Wooley

by **robbie** » Mon Oct 17, 2011 2:37 pm

Hello David,

Been a little while since I last checked in on to see how your ongoing build model of HMS Daring is progressing! what can I say except "Outstanding,Sir" you fancy building my hanger space on mine fore me? Really looking forward to seeing updates on your boats and boatbays!Drop me aline if you need PAC 24 info?
Your ship has been spending a bit of time around the UK at mo managed to get hold of these from a source. One key bit of information you may wish to know is that she has had something new fitted on the transom between the doors and has susequently had her transom pennant numbers lowered in line with the two AFT Pelligrini doors.
Heres a few shots to show you what I mean. Cross check them with your plans sheet 2 of 3!

See what I mean?

A few more of her port side:-

My T45 HMS Diamond has not been to far either:-

Catch up again soon David. Keep up the good work on your build of HMS Daring & all the best for now!

Robbie
T45

by **ARH** » Mon Oct 17, 2011 4:55 am

Hi Dave, Good to see you again, young ARH brought me, he,s getting back to building his boats, he,s building a TID Tug , its got a steam plant inside, its on hold for the moment till he gets more info, 3/4 built at the present time,

by **Dave Wooley** » Mon Oct 17, 2011 3:51 am

Hi Andrew Good to hear from you. Been away for a few days at the Blackpool Model Boat show and met up with ARH . Wall to wall model boats, any way to your question the thread I used for the coil of cable was Billings black thread. It was the right shade, thickness and could be shaped. .Although not electrical cabling it looks the part an illusion yes but an effective one! Hope to see you in November ?
Dave Wooley

by **Ticonderoga** » Sun Oct 16, 2011 5:53 am

Hello Dave,

Just been catching up, breath taking work.....

What did you use for the coiled black wire/tube?

Andrew

by **Dave Wooley** » Fri Oct 07, 2011 6:45 am

russclark wrote:hi dave ,i've been away a bit and you seem to have switched builds on me,is the hanger build part of a larger project or is it a stand alone?and what has happened to your other build?

Hi Russ good to hear from you. Noooo I haven't switched builds. The hanger bit is part of a 12month build log for the Model Boats magazine on HMS Daring a massive 1:72nd job and building the hanger could be seen as a �scratch build� bit in its own right as it's a slight departure to concentrating solely on the exterior of the model . I thought I'd show how progress on this segment of the build was developing as it worked in well with the build sequence I�d worked out for the Daring model . As for the Russian Corvette that remains very much alive , in fact only today I received the bespoke running gear and I'm awaiting the new set of updated GAs with all the modifications and corrections

The Daring when it goes will make much needed space for the Corvette and so it goes on , �slip clear next ship please�

Dave Wooley

by **Dave Wooley** » Fri Oct 07, 2011 6:26 am

horatio123 wrote:Hello Dave .
I am a new member of this website .
I am starting a build of 1/96 HMS Dauntless using a Sirmar Hull etc and am following your article with interest both here and in Model Boats , I am an active member of the SWA and exhibit with them in the South of England .
I was wondering if anybody can supply details of the bridge interior of the Daring Type 45 , I really am thinking that a hanger interior and detailed boat bays will be a extra interest on the model although the detail will be more difficult at 1/96 ? How are you thinking of making hanger/boat bay doors ? I am considering removable panels if I can work out a way of securing them and remving them easily ?

You are doing a great job , look forward to the finished article .

David McNair-Taylor

Hello David and Welcome . There is another build of a 45 and at 1:96 over on http://modelwarshipsuk.informe.com/forum which might also be quite useful for you . As for the boat bay I'm just following the same as on the full size ship but stowing them as per the boat gallery up in to the top of the roof space .A little careful work and they could be made to slide along the track but that remains to be seen. For now I'll be content with the doors stowed away. This thread is has run its course , at least untill I return to the boat galleries but there remains plenty of other work on Daring to keep me going for a few months. David thank you for your appreciative comments and I wish you all the best with your build and and I'll keep an eye open for progress

Dave Wooley

by **russclark** » Thu Oct 06, 2011 4:19 pm

hi dave ,i've been away a bit and you seem to have switched builds on me,is the hanger build part of a larger project or is it a stand alone?and what has happened to your other build?

by **horatio123** » Thu Oct 06, 2011 10:38 am

Hello Dave .
I am a new member of this website .
I am starting a build of 1/96 HMS Dauntless using a Sirmar Hull etc and am following your article with interest both here and in Model Boats , I am an active member of the SWA and exhibit with them in the South of England .
I was wondering if anybody can supply details of the bridge interior of the Daring Type 45 , I really am thinking that a hanger interior and detailed boat bays will be a extra interest on the model although the detail will be more difficult at 1/96 ? How are you thinking of making hanger/boat bay doors ? I am considering removable panels if I can work out a way of securing them and remving them easily ?

You are doing a great job , look forward to the finished article .

David McNair-Taylor

by **Dave Wooley** » Wed Sep 28, 2011 11:04 am

navydavesof wrote:Dave,

Excellent job so far, sir! I really enjoy following your work. Seeing the solutions you come up with to problems is very inspiring. I will be making the interior of a hanger for a project, CGN-42, soon, and you are illustrating quite great techniques and ideas for construction. Thank you, and please keep the pictures coming!

Hi navydavesof Thank you for your kind comments they are much appreciated and i'm really pleased that they can be of help . Solving problems is a much fun as building the parts .Best of luck with your CGN-42 and please post up some pictures when you are ready .
Dave Wooley

by **navydavesof** » Wed Sep 28, 2011 5:11 am

Dave,

Excellent job so far, sir! I really enjoy following your work. Seeing the solutions you come up with to problems is very inspiring. I will be making the interior of a hanger for a project, CGN-42, soon, and you are illustrating quite great techniques and ideas for construction. Thank you, and please keep the pictures coming!

by **Dave Wooley** » Wed Sep 28, 2011 4:41 am

HvyCgn9 wrote:G'day Dave,
Just been reading the start of the kit build in the August MB really like the way you have laid out the internals A question how tall is the hanger door opening?? and what Heli's are the 45's able to carry??

Cheers Bruce

Hi Bruce I try as much as possible to retain the principle of KIS { keep It Simple } There is room , of course to expand the features but these would need to be incorporated at an early stage . Daring model will only sail once and that's it. One day I'll build a model I can sail for fun . The size of the hanger opening is 85mm x 84mm and I have a 1:72nd RN Merlin 101. that will be one of the last jobs on my long list of , "I must do that next"

Dave Wooley

The Ship Model Forum

HMS Daring Type 45 DDG "hanger build"

Post a reply

Expand view Topic review: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"

Re: HMS Daring Type 45 DDG "hanger build"