The Ship Model Forum

by **Victorious** » Wed May 31, 2006 4:51 am

Nothing else to start on. So Marlborough will be next on the blocks and besides, I DO WANT TO GET Marlborough finished.

by **ddp** » Tue May 30, 2006 9:59 pm

unless you suddenly start another ship as you did with the carrier than the Marlborough won't be done than.

by **Victorious** » Sun May 28, 2006 6:37 pm

ARH wrote:Yes, your well past that stage now,

It will be nice to get back to the Marlborough, after the Vic's done. Hopefully about the end of September, which will take me through the winter. It should be done by this time next year.

by **ARH** » Sun May 28, 2006 6:33 pm

Yes, your well past that stage now,

by **Victorious** » Sun May 28, 2006 6:31 pm

I seemed to remember this stage of the build as though it were yesterday, doesn't time fly.

by **ARH** » Sun May 28, 2006 4:46 pm

Hi this was the picture I posted on the build, it shows the very thin matting on the hull with the resin applied.
The matting is cut in sections at a time and resin applied to the hull, then the matting laid on top and with a brush more resin brushed and dabbed in to the matting, this strenghtens the balsa wood and leaves a good surface for the filla paste to adhere to.

by **cwm** » Sun May 28, 2006 2:57 pm

Thanks Timmy, but what I'm trying to see is how he layed the cloth on the hull before he wetted it out with the resin.

Chris

by **Timmy C** » Sun May 28, 2006 2:05 pm

See page one of the Iron Duke's build thread: http://www.shipmodels.info/mwphpBB2/vie ... php?t=3579

Page one covers the construction of the hull.

by **cwm** » Sun May 28, 2006 1:13 pm

Hi Ron

Did you take any pictures while you were fibre glassing your Iron Duke. If you did would it be possible for you to post them please.

Thanks

Chris
Canada

The Ship Model Forum

A question (request) for ARH

Post a reply

Expand view Topic review: A question (request) for ARH

A question (request) for ARH