The Ship Model Forum

by **Timmy C** » Wed Jul 27, 2022 3:07 pm

Probably because they used their set for the Viribus Unitus as the starting point, which doesn't have the H14 searchlight platform, and forgot to include it when they modified the set for Szent Istvan. Only thing I can suggest is to hope that they might have actually included the parts but forgot to update the instructions, and see if there are any extra gussets left over at the end that you can use.

by **delavalrock** » Wed Jul 27, 2022 1:53 pm

Has anyone built the Trumpeter 1/350 Szent istv�n using the Eduard photo etch set?
I have this and was wondering why they seem to have ignored the underside of the searchlight platform part H14. They have P.E. parts for the underside of part F13 so why not H14.unless I'm missing something.

by **Mr. Church** » Sat May 29, 2021 1:15 pm

Trumpeter's Szent Istv�n seems to be finally appearing in stock with U.K. and European retailers. Looking forward to getting hold of one.

The link in the previous post is now showing the sprues. Here is the one unique to Szent Istv�n with her distinctive funnel searchlight platform and square shaped ventilator cowl:
http://www.trumpeter-china.com/Uploads/ ... 4c26ee.jpg

by **Mr. Church** » Tue Mar 16, 2021 11:21 am

Some photos of the box and instruction leaflet for Szent Istv�n now uploaded to the Trumpeter website. No photos of the sprues as yet it seems:

http://www.trumpeter-china.com/index.ph ... =3657&l=en

by **mopy** » Mon Feb 08, 2021 5:03 pm

maurice de saxe wrote:
skoda guns 2.jpg
Here are two images from the Skoda archives that may help.

Maurice

Thanks for those. On them, the barrels seem much smoother than on the link I posted (kind of hard to see).
In that case, Master model, and Trumpeter seemed to get it closer to real thing than BD barrels.

by **maurice de saxe** » Mon Feb 08, 2021 4:18 pm

Here are two images from the Skoda archives that may help.

Maurice

by **mopy** » Mon Feb 08, 2021 2:55 pm

The images of ship with high enough quality to see main gun details seem to be scarse.

On picture here:

https://www.enciklopedija.hr/natuknica.aspx?id=64774

The main gun barrels seem to look closer to BD barrels, rather than Trumpeters redention, or Masters.

I think I will have to dig a bit more on this.

by **Mr. Church** » Mon Feb 08, 2021 8:08 am

Your original question referred specifically to the Master barrel set and not the B&D Barrels set. Hence my response.

As regards the B&D Barrels set I don't know as I don't have the set? Maybe try contacting the manufacturer and asking him directly?
http://www.bdbarrels.com/

by **mopy** » Mon Feb 08, 2021 5:11 am

Mr. Church wrote:
mopy wrote:
I wonder if these would fit on Trumpeter kit:

https://www.scalemates.com/kits/master- ... is--322274
https://www.scalemates.com/kits/master- ... nt--322273

They have been released just after the Kombrig kit, so they were designed for it.
See my post above from January 29th 2021 comparing the Master barrels to the Trumpeter kit barrels. I should add that the Master barrels do fit through the gun ports in the Trumpeter kit's turrets too.

I haven't built the kit yet so don't know about the Master masts and yards set. Difficult to envisage any problems really as they are straightforward pole masts and not complicated tripods.

I saw your earlier post.
Thanks for the input.
There is another barrel set:

https://www.scalemates.com/kits/bandd-b ... s--1314576

released last year, so it would be a valid assumption that it was designed for Trumpeter kit, or at least not for Kombrig kit alone.

The barrels in this set look quite different than the ones in Master set (smooth).

by **Mr. Church** » Sun Feb 07, 2021 6:24 am

mopy wrote:
I wonder if these would fit on Trumpeter kit:

https://www.scalemates.com/kits/master- ... is--322274
https://www.scalemates.com/kits/master- ... nt--322273

They have been released just after the Kombrig kit, so they were designed for it.

See my post above from January 29th 2021 comparing the Master barrels to the Trumpeter kit barrels. I should add that the Master barrels do fit through the gun ports in the Trumpeter kit's turrets too.

I haven't built the kit yet so don't know about the Master masts and yards set. Difficult to envisage any problems really as they are straightforward pole masts and not complicated tripods.

by **mopy** » Sat Feb 06, 2021 2:04 pm

Guys, are there any rumors of some AM company doing a dedicated set (maybe Pontos, Infiny, or similar) for Trumpeter kit?
So far, only Eduard made a specific PE set (in this case "BIG" set):

https://www.scalemates.com/kits/eduard- ... t--1322446

I wonder if these would fit on Trumpeter kit:

https://www.scalemates.com/kits/master- ... is--322274
https://www.scalemates.com/kits/master- ... nt--322273

They have been released just after the Kombrig kit, so they were designed for it.

by **mopy** » Sat Feb 06, 2021 2:00 pm

mike_espo wrote:Didn't know there was a 1/350 resin kit from Kombrig. Thought it was 1/700.

Take a peek here:

https://www.scalemates.com/kits/combrig ... is--195599

Around year or two later, they announced the 1/700 scale version, but it seems it is still "in progress".

I am aware of just three 1/700 kits out there:

Armo:

https://www.scalemates.com/kits/armo-70 ... s--1164005

Poseidon Models:

https://www.ebay.com.sg/itm/Poseidon-NO ... 2502970989

and WSW (I think this one is out of production for a long time now):

http://www.steelnavy.com/viribus.htm

by **mike_espo** » Sat Jan 30, 2021 10:01 am

Didn't know there was a 1/350 resin kit from Kombrig. Thought it was 1/700.

by **Mr. Church** » Fri Jan 29, 2021 12:49 pm

I ordered a set of these and they finally arrived today:
https://www.scalemates.com/kits/master- ... nt--322273

They are designed for the Combrig kit I think so I was wondering would they be OK for the Trumpeter kit? They seem to pretty well match the latest Trumpeter kit versions length wise. So they should be OK to use with the Trumpeter kit. I have not measured them against drawings or anything, only compared them to the kit parts:

by **Mr. Church** » Sat Jan 23, 2021 9:10 am

It all depends how you wish to finish your model? There were several significant detail differences.

With Viribus Unitis you have a choice of the olive green or light grey colour schemes. Also she initially had torpedo nets and booms. These were later removed.

Szent Istv�n only ever had the light grey colour scheme as the olive green one was discontinued before she entered service. And she never carried any torpedo nets.

Viribus Unitis did a foreign cruise of the Mediterranean in May 1914 visiting several different ports including Malta and Beirut. Plus she would have been reasonably active in the Adriatic in peacetime before the outbreak of war. Szent Istv�n was only completed during the war so saw very little sea time and spent most of her life at anchor in Pola.

On that basis Viribus Unitis would seem to present more options to the modeller? Though Szent Istv�n is probably more famous due to the well known footage of her sinking.

by **mike_espo** » Fri Jan 01, 2021 6:30 pm

I'm not sure if I will get Szent Istv�n or Viribus Unitis.

See which is cheaper.

by **Mr. Church** » Thu Dec 31, 2020 2:39 pm

Szent Istv�n looks to be released now from China, Item No. 05365:
http://www.trumpeter-china.com/index.ph ... d=197&l=en

Box art as seen on Trumpeter's page above:

It will probably take some time to reach Europe given the COVID situation. But hopefully not too long.

by **mopy** » Tue Dec 15, 2020 8:56 am

mike_espo wrote:Thanks. I wonder if we will see the Szent Istv�n in the near future? I mean the 1/350 scale model.

https://www.scalemates.com/kits/trumpet ... n--1197838

It is announced. I guess it is only a matter of time.
I suspect it shouldn't be long now, when the sister ship is out (Viribus Unitis).

by **mike_espo** » Sat Dec 12, 2020 12:05 am

Thanks. I wonder if we will see the Szent Istv�n in the near future? I mean the 1/350 scale model.

by **MartinJQuinn** » Thu Dec 03, 2020 9:10 pm

It's available from several sellers on eBay as well.

The Ship Model Forum

Calling all Tegetthoff-class battleship (WWI) fans

Post a reply

Expand view Topic review: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Eduard photo etch szent istv�n

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans

Re: Calling all Tegetthoff-class battleship (WWI) fans