Ford Class Island Colors

Post here for tips on modeling.

Moderator: JIM BAUMANN

Post Reply
User avatar
boomstick68
Posts: 1092
Joined: Tue May 01, 2012 4:38 pm
Location: The Buckeye State

Ford Class Island Colors

Post by boomstick68 »

The new Ford class CVN's seem to have multiple shades of gray on the island in various locations. Can someone confirm this and advise on what colors are to be used?
User avatar
Timmy C
Posts: 12489
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: Ford Class Island Colors

Post by Timmy C »

In this photo on DVIDS (you should search there for more), you can see that at least for the flight deck level, there's an extra layer of lighter grey material that causes the colour difference: https://www.dvidshub.net/image/9808218/ ... l-shipyard

Asides from that, I believe the rest of the discrepancies are due to weathering, so no specific colour and you'll just have to eyeball it.
De quoi s'agit-il?
User avatar
Admhawk
Posts: 964
Joined: Sat Feb 03, 2007 1:00 pm
Location: Bowmanville, ON, Canada

Re: Ford Class Island Colors

Post by Admhawk »

The ship is painted in standard Haze Gray.

Like all large USN ships, it only gets a full paint job when in drydock once every 5-10 years. The rest of the time, paint is applied where it can be reached, or where necessary. This creates large patchy areas of new and old paint, different batches, some areas faded more than others, or rust streaked more than others.

Another issue that the Navy has had for over 10 years is the pigments in the paint fade at different rates. The blue pigment fades faster than the red oxide, giving a pink hue to some sections that are harder to reach. This issue has seen a lot of work by the Navy's technical division with some success, but logistics, mtce cycles, cost, complexity of coating application, environmental regs and availability issues mean the pink patches still show up.

Some areas, like the big square SPY radar panels and domes can't be painted, so the surface has the color molded in. They tend to show as slightly different shades.

And lastly, the big angled front faces look lighter because of the sun and sky light reflecting off them.

As a modeler, you have the option of trying to replicate the differences, or just be happy with a clean paint job.
Darren (Admiral Hawk)
In the not so tropical climate of the Great White North.
ModelMonkey
Model Monkey
Model Monkey
Posts: 4145
Joined: Sat Aug 20, 2005 9:27 pm
Location: USA
Contact:

Re: Ford Class Island Colors

Post by ModelMonkey »

Here's one modeler's take on the various colors appearing on Ford's island, including the pinky bits, and her heavily weathered hull and flight deck.

This is the 1/700 scale Magic Factory kit being built by Shokaku Nanoda of Japan. The photos are his.
Attachments
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 33.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 32.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 66.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 65.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 64.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 63.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 62.jpg
1-700 Gerald R Ford (Magic Factory) by Shokaku Nanoda 57.jpg
Have fun, Monkey around. TM

-Steve L.

Complete catalog: - https://www.model-monkey.com/
Follow Model Monkey™ on Facebook: - https://www.facebook.com/modelmonkeybookandhobby
User avatar
Admhawk
Posts: 964
Joined: Sat Feb 03, 2007 1:00 pm
Location: Bowmanville, ON, Canada

Re: Ford Class Island Colors

Post by Admhawk »

I admire his skill and attention to detail, but I don't think I would ever be happy with my own model weathered that much. I'm definitely on the clean builder model side of things.
Darren (Admiral Hawk)
In the not so tropical climate of the Great White North.
Post Reply

Return to “Tips and Tricks”