USS Indiana BB-58 Scratchbuild in 1/96 - 1944

ARH · Post by **ARH** » Sat Dec 09, 2006 3:25 am

Looking good Bill.

Post by **Dave Wooley** » Sat Dec 09, 2006 11:47 am

Hi Bill A Loverly piece of detailed work As i've always said it's the nondescript items around the ship that often make the model.
Dave Wooley

Richard J OMalley · Post by **Richard J OMalley** » Sat Dec 09, 2006 7:01 pm

Looking very good

Post by **ModelMonkey** » Sat Dec 09, 2006 7:02 pm

Bill, I love it!

Avery Boyer · Post by **Avery Boyer** » Sat Dec 09, 2006 7:10 pm

Oh no, you can't do that yet, you have to wait until we get over the basic stuff before you begin the details

Seriously Bill, great job!

Millard · Post by **Millard** » Mon Dec 11, 2006 8:34 pm

Way cool Bill

Rod

Reid · Post by **Reid** » Mon Dec 11, 2006 11:40 pm

I wish i could do that!!!!

Reid

Dustin G. · Post by **Dustin G.** » Tue Dec 12, 2006 10:42 am

You and me both Reid.... of course, I will try my hand at scratchbuilding sometime in the next few years. I want to build a model of the USS Sage, AM 111 for my grandad. He was I think an engineer on that ship.

Bill Waldorf · Post by **Bill Waldorf** » Tue Dec 12, 2006 4:43 pm

Dustin G. wrote:You and me both Reid.... of course, I will try my hand at scratchbuilding sometime in the next few years. I want to build a model of the USS Sage, AM 111 for my grandad. He was I think an engineer on that ship.

You CAN do it!!!!

You won't know till you TRY!!!

Jefgte · Post by **Jefgte** » Tue Dec 12, 2006 6:41 pm

High quality of details and a very clean work

"Bravo l'Artiste"

Jef

Reid · Post by **Reid** » Tue Dec 12, 2006 8:04 pm

AAAAGGGGGHHHHH!!!!!!!

A PHILOSOPHER!!!
thx for the good advice I will try (one day)

Reid

Bill Waldorf · Post by **Bill Waldorf** » Tue Dec 12, 2006 11:05 pm

Jefgte wrote:High quality of details and a very clean work

"Bravo l'Artiste"

Jef

Merci beaucoup!!!

???

Dustin G · Post by **Dustin G** » Wed Dec 13, 2006 10:33 am

Hehe... Once I'm done with my three other projects, I'll try my hand at scratch building. I have found a set of plans on Floating Drydock for the USS Auk, which was the class leader of the class that the Sage is in. Hopefully that, and any pics I can find on the internet will help. I even have a framed picture of the Sage entering Havanna Harbor in my bedroom.

Sylvain Auger · Post by **Sylvain Auger** » Wed Dec 13, 2006 4:31 pm

Fantastic work as usual Bill!!!!! I don't post often but I'm checking all the scratchbuild article when updates are made available. Some people read the journal in the morning but I read the various posts on MW. Much more cheerful reading IMHO

Cheers

James · Post by **James** » Thu Dec 14, 2006 11:09 pm

It is my honor and privilge (sp) to be able to see with my own eyes

the awesome abilities of "The Bill". The man is a genius with this stuff. I saw the boat tonight and I am floored every time I see this beauty.

Bill, you da bomb !!!!!!!

James

Scott Tingley · Post by **Scott Tingley** » Fri Dec 15, 2006 12:31 pm

Has anyone ever tried to use Plasti Dip in the black color for their blast bags? Looks just like rubber and you can build up coats (thickness). Instead of vacume forming over clay you could dip the clay mould in the Plasti Dip. It's available at Grizzly.com for around 8 bucks.
THANX
Scott[/img]

Bill Waldorf · Post by **Bill Waldorf** » Sat Dec 16, 2006 1:06 am

Scott Tingley wrote:Has anyone ever tried to use Plasti Dip in the black color for their blast bags? Looks just like rubber and you can build up coats (thickness). Instead of vacume forming over clay you could dip the clay mould in the Plasti Dip. It's available at Grizzly.com for around 8 bucks.
THANX
Scott[/img]

You know, that's an interesting idea. I had forgotton about the stuff you are talking about.I am familier with it. However, how will the plasti-dip pull off the mold? Some experimentation would be in order here. I'll stay with what I have for now. Thanks for the tip.Perhaps I'll try that stuff in the future.

Bill Waldorf · Post by **Bill Waldorf** » Sun Dec 17, 2006 12:27 am

Post Deleted

Bill Waldorf · Post by **Bill Waldorf** » Tue Dec 19, 2006 8:35 pm

Hello again all, and Happy Holidays.

Armor belt areas port and stb. now completed except for deck level scupper pipes. Thought you would like to see the port side belt before primer. All areas are styrene with the exception of the degaussing cable, grab irons on the maint. hatches, and small eyelets. These items are metal. I'll now prime this and then get ready to do the boot topping and the bottom of the hull in finish paint. I'll start the photos with a couple of shots of the USS Alabama, basically the same ship. See below................................

Here's the real deal just aft of midships. Note all the little details, which should be reproduced on the model. I'll do my best. The areas I have completed are just below the railing. Note the small bulwark that runs the entire way around the ship. I'll add that after the decks are installed. Then the railings. As you can see, they contain 5 steel cables. I can't find any stantions with 5 holes. If anyone can help, please advise. Otherwise I go with three.

Here's another shot more parallel to port side. Again note all the "stuff".

The next few photos show the model, same side. I won't detail every photo, I think you'll get the idea. Take a look.......................

Here's where the belt begins forward.

A little further down.

Here's the whole belt.

Here's the end of the belt.

A view from fwd. looking aft.

Here's another full view of the armor belt area. I'll now prime this and then mark off the waterline to get ready to do the boot topping and the bottom of the hull. Then we start to paint!!

I am getting there! More to come.................. Stay Tuned....................
I continue on.............................

Devin · Post by **Devin** » Tue Dec 19, 2006 9:45 pm

Bill,

I'd dig up some photos about those railings and see if she truly had them during the war. I think that maybe the 5-line versions were added after she was made a museum for safety reasons. I know public places with any sort of railing, and even houses built to code, can not have more than a certain amount of space between the horizontals. That coupled with the fact that I can't recall every seeing any photos with 5 line life-lines leads me to believe that this is a post war addition.

-Devin

The Ship Model Forum

USS Indiana BB-58 Scratchbuild in 1/96 - 1944

BB-58

Just an Idea

Re: Just an Idea

Post Deleted