Postwar navy.

[Nektarios]

Last of the FRAM II D-211 photos.

[Nektarios]

Here are some photos of my friend's Yiannis Karystinos works. His work is so much detailed that i do not have to comment it.









He ll post more photos of his work in the near future.

[kidcurrie42]

What do you mean you do not need to comment, Comments like Awesome, Superb are a few that come to mind.
Your friend Yiannis is obviously very heavily modifying a kombrig Kresta II, it is looking like the real ship was, heavily armed, and so full of electronics and other clutter,

Bravo Zulu Yiannis, i hope you will post or let Nektarios post more of your work.

Happy modeling

John

[Avery Boyer]

Lovely work, really superb

[angeleyes]

Nektarie, ean thymame kala kapou diabasa se ena apo ta post sou oti den mporis na paraggilis eched sets i kapia aftermarkets pou thelis apo ellada.Ean thelis na mpis ston kopo tha mporousa na sou kano tis paraggelies apo edo (London) kai na sou ta steilo meso taxydromeio.Mporo na paraggilo apo opoudipote opote to mono pou tha xreiasto apo esena tha eine ta xrimata.Auto tha prepi na doume pos tha to kanoume gia na min xanis esi polla lefta stin exagora liras kai na min plironis para polla taxydromika.Exo logariasmo stin ellada opote tha mporouses na mou bazis kateutheian to antoistixo se euro kai na glitonoume tin promitheia.Ean den eisoun esy pou eixes kani auto to post tote sygnomi alla den thymame pios allos "ellinas" itan.

To everyone else sorry i had to type in "greek" vocabulary , as i just wanted Nectarios to know a few things about me ordering stuff on behalf of him from abroad.

[Nektarios]

What do you mean you do not need to comment, Comments like Awesome, Superb are a few that come to mind.
Your friend Yiannis is obviously very heavily modifying a kombrig Kresta II, it is looking like the real ship was, heavily armed, and so full of electronics and other clutter,

Bravo Zulu Yiannis, i hope you will post or let Nektarios post more of your work.

Happy modeling

John

Lovely work, really superb

I ll try to convince my friend to post more photos of his work.

[Nektarios]

Nektarie, ean thymame kala kapou diabasa se ena apo ta post sou oti den mporis na paraggilis eched sets i kapia aftermarkets pou thelis apo ellada.Ean thelis na mpis ston kopo tha mporousa na sou kano tis paraggelies apo edo (London) kai na sou ta steilo meso taxydromeio.Mporo na paraggilo apo opoudipote opote to mono pou tha xreiasto apo esena tha eine ta xrimata.Auto tha prepi na doume pos tha to kanoume gia na min xanis esi polla lefta stin exagora liras kai na min plironis para polla taxydromika.Exo logariasmo stin ellada opote tha mporouses na mou bazis kateutheian to antoistixo se euro kai na glitonoume tin promitheia.Ean den eisoun esy pou eixes kani auto to post tote sygnomi alla den thymame pios allos "ellinas" itan.

To everyone else sorry i had to type in "greek" vocabulary , as i just wanted Nectarios to know a few things about me ordering stuff on behalf of him from abroad.

Den eimoun egw alla s euxaristw gia tin eugeniki prosfora.

To everyone else sorry i had to type in "greek" vocabulary , as i just wanted to reply to Angeleyes.

[Guest]

Here are some photos of my friend's Yiannis Karystinos works. His work is so much detailed that i do not have to comment it.
He ll post more photos of his work in the near future.

Congratulations Yiannis

[Pere]

Kuznetsov. 1/700 trumpeter at 85%. build
this week I�will finish . P.E. and a little more







best regards from Palma

Pere

[Nektarios]

Kuznetsov. 1/700 trumpeter at 85%. build
this week I�will finish . P.E. and a little more
best regards from Palma
Pere

SUPERB WORK PERE
Can t wait to see your Kuznetsov finished.

[Nektarios]

Here are some photos of a couple of what-if Super Spruances.I used the Fujimi Spruance kits because they represent the spruances in their most modern configuration (widened hangar,maintenance enclosures for Phallanx etc.). I added the AEMSS stealth mast from the DML DDG-968 kit, 2 Mk-45 mod4, a Mk-48 VLS in place of Mk-29, 2 RAM launchers from JAG, plus some additional antennas.and electronics.









Any questions or comments are always welcome.

[Nektarios]

Some more photos of the super Spruances.

[Tom-Tom]

It's a nice job you did on these ships.

[Sparrow]

Have you ever seen a moroccan ship in 1/700?.

Well, here is my Lt Col Errhamani, a Descubierta Class light frigate built in Spain for our southern neighbours.

http://perso.orange.es/mc09391939/Errha ... %20(5).JPG
http://perso.orange.es/mc09391939/Errha ... %20(0).JPG
I scratchbuilt this little corvette as a test for my Cazadora. She was build out of card with skywave fittings and generic railings. Cazadora was made of Evergreen sheet.

http://perso.orange.es/mc09391939/Errha ... %20(7).JPG

I can�t direct link images because of their size. Simply hit the url�s to see them.

Hope you like it.

[arnobiz]

A really nice job you did there Sparrow!

Did you make the hull out of a block? How did you make the funnels? What is your opinion on the Skywave details set?
Also, where did you find Exocet launchers?

If I may make a suggestion you should you photo-etched radars your ships would look even better!

[Sparrow]

A really nice job you did there Sparrow!

Thanks, man.

Did you make the hull out of a block?

No, both vessels are "plank on frame".

How did you make the funnels?

They are hollow. Simply cut a profile of the funnels, adding the necessary "depth" on both sides, then folded inwards fore and aft to meet their simetric parts and glued in place. The process took some try and error, but ended up quite nicely. I don�t have pictures rigth here, but if I find them I�ll post.

What is your opinion on the Skywave details set?
Also, where did you find Exocet launchers?

I love them. Perhaps somewhat overscaled, but very nice and an enormous work-saver for the scrathbuilder. The exocet launchers are Skywave�s as well.

If I may make a suggestion you should you photo-etched radars your ships would look even better!

Oh, I wish I had!, but I completed this ships time ago when my experience with PE was very little (in fact they were my first examples of use of PE railing)
I intend to refit them sometime in the future to enhance them, and PE radars is first priority, as are some inclined ladders and new rigging and railing, but the building schedule is tight and the stash doesn�t seem to reduce it�s growing rate, hehe.

Regards.

[gtb -red]

nice work as always Nektarios.

[Nektarios]

It's a nice job you did on these ships.

Thank you Tom-Tom i can t wait to see your carrier vehicles and tractors finished count me in for at least 6 sets.

[Nektarios]

Have you ever seen a moroccan ship in 1/700?.

Well, here is my Lt Col Errhamani, a Descubierta Class light frigate built in Spain for our southern neighbours.

http://perso.orange.es/mc09391939/Errha ... %20(5).JPG
http://perso.orange.es/mc09391939/Errha ... %20(0).JPG
I scratchbuilt this little corvette as a test for my Cazadora. She was build out of card with skywave fittings and generic railings. Cazadora was made of Evergreen sheet.

http://perso.orange.es/mc09391939/Errha ... %20(7).JPG

I can�t direct link images because of their size. Simply hit the url�s to see them.

Hope you like it.

Sparrow

[Nektarios]

Sparrow [/quote]. Descubierta class looks awesome.



Thank you gtb-red for your comment.