Mega BB in progress.

Post by **Timmy C** » Sat May 17, 2008 1:21 pm

Would the blast from the 5" damage the crane?

prowannab · Post by **prowannab** » Sat May 17, 2008 4:31 pm

thanks gents for the info ( if you are not a gent but a lady than please excuse me for the miscall) but timmy you brought something to my attention that i totally missed, i geuss it would ,but i don't really have another place for it. do you think that if i built a sheild over it that would be good enough for proper function without being blasted to bits ?

GTDEATH13 · Post by **GTDEATH13** » Sat May 17, 2008 4:53 pm

I think that what you are missing is the masts for and aft of the funnels.

The 5" gun would not have serious blast effects on your crane, but why dont you try placing a simple shiled attop the crane base and ropedrum but do not overdo it...

She is coming out fine so far, keep up the good work and the posts for us hungry people...

Post by **Timmy C** » Sat May 17, 2008 9:58 pm

I would probably put a retractable shield - the vertical component of the shield would be between the crane and the superstructure, with the "roof" part of the shield extending from the top of the vertical component to covering just the outboard edge of the crane. This roof would have hinges at its connecting point with the vertical component, allowing it to swing up and back against the inward side of the vertical component when the crane is needed.

Although, I do agree with GTDeath that the damage from the 5" would be slight, and a robust crane would probably not need the shield.

prowannab · Post by **prowannab** » Wed May 21, 2008 6:41 pm

hello again, i started work on the forward mast,and although it didn't turn out as good as i had hoped i think it will serve it's purpose,you be the judge and let me know

prowannab · Post by **prowannab** » Tue May 27, 2008 8:44 pm

hello once again all , i've been a little busy with the masts and throwing a few more guns on her, this time it's on the rear shelf. that's about it. oh by the way does anyone think that i'm uploading to much , should i just get some good progress then upload , if so do tell , take care and have a good one.

prowannab · Post by **prowannab** » Mon Jun 23, 2008 7:07 pm

Well all it's been some time since my last update, altough this isn't a big update, nontheless it's still an update. I finished my first aircraft, and still have a few to do but I have a good start I think. I also added a mk 37 radar to the aft and am thinking of putting some more in as in the last pic you can see were I want to put it ,but I don't think it's goping to work because of the hieght of it in contrast of the AA' that's going to sit behind it.W ell yall be the judge for me and I will take all criticism, as I think that's the only way to get better is to be told in complete honesty about how the thing is looking. Well yall have a good day and thanks for looking

mitchell300 · Post by **mitchell300** » Wed Jul 02, 2008 8:56 am

Looks good

Now finish this BB

BTW how much guns does she have??
3?

Mitch

prowannab · Post by **prowannab** » Mon Jul 07, 2008 1:18 pm

Mitchell300; Thank you. I'm working as fast as I can with her

I'm not to sure how many guns she'll have when I'm done with it, but it'll be a lot

I'm not sure what the "3?" is though. but here is my latest update I did away with the bismarcks forward gun controls to put something a bit more American in and I think it turned out better , I also did my first set of gun bags which in the picture doesn't look that great but I think they do look better in person. I also started and completed my sea floor, for my dio. Then I got my Dia Lang today I'm using her as a IJN destroyer because it's a whole heck of a lot cheaper than the actual destroyer. I couldn't think of paying 50 bucks for a model that I'm just going to cut up. But I would like some advice on the things I can do to make it look more Japanese like., but here are the pics and thanks for looking and have a great day.

Brian · Post by **Brian** » Mon Jul 07, 2008 5:02 pm

Are the "BUD" cans for a reference as to scale of the BB? I prefer to use Guinness pint cans myself. Just kidding. You have done a nice job putting the BB together. Keep up the good work!! I look forward to the completion.

Regards,

Brian

prowannab · Post by **prowannab** » Mon Jul 07, 2008 6:15 pm

Actually the "bud" cans are for "inspiration"

Brian · Post by **Brian** » Mon Jul 07, 2008 9:56 pm

I can relate. I look forward to your new posts.

GTDEATH13 · Post by **GTDEATH13** » Tue Jul 08, 2008 6:14 pm

She's coming out great...

Replacing the german rangefinders with the mk37 was a very nice idea... Will you replace the aft ones too??

I have one question though...

Where will you put the main rangefinders of the main guns? For the aft one I would suggest lowering th mk37 radar a deck down and placing the main rangefinder atop where you have your mk37 now.

I cannot understand where you will put the fore main rangefinder...

Anyway, It's your build and your decisions...

Guinness can are most inspirational, may I add

prowannab · Post by **prowannab** » Fri Jul 18, 2008 2:42 pm

I have a bit of more progress, not to the BB but to it's first victim. I got a little burnt out on the BB, so this is getting back into the spirit of building!!! but here it is.

oh and one question, Can i use the Bismarck's rangefinders, with a little PE ? one I don't have the U. S. version , and two I can't really find any good pics of the U.S. naval ones for that time period. but i do have a mock up pic of the German ones.

GTDEATH13 · Post by **GTDEATH13** » Fri Jul 18, 2008 3:21 pm

I guess your ship's guns really make some damage...

Great imagination and building skill... We want more...

GTDEATH13 · Post by **GTDEATH13** » Sat Jul 19, 2008 3:54 pm

prowannab wrote: Can i use the Bismarck's rangefinders, with a little PE ? one I don't have the U. S. version , and two I can't really find any good pics of the U.S. naval ones for that time period. but i do have a mock up pic of the German ones.

Hope this helps...

http://www.history.navy.mil/library/online/radar-2.htm

prowannab · Post by **prowannab** » Sat Jul 19, 2008 9:14 pm

GTDEATH13; That was a tremendous help, as it turns out, I do have those in a PE set. I know what a DUH!!!

moment. But I do thank you for the help.

GTDEATH13 · Post by **GTDEATH13** » Sun Jul 20, 2008 9:44 am

Glad I 've helped ....

Take in mind that the usual pattern is to have the main directors in a more elevated position then the secondary mk37 directors ....
Look for Iowa class battleships photos. You will clearly see the policy for placing directors ...

Keep up the good work, waiting for updates...

prowannab · Post by **prowannab** » Fri Aug 01, 2008 8:19 am

Well I haven't been working on the BB that much just some small things , such as getting the secondary battery and all the 5" guns ready for the bags to be installed, but I did figure something out with those main gun directors, I hope yall like, but I think that they'll work, and the other pics is of the striken destroyer, it is pretty much done I have to do some debris feild work and some more ground work but thats it.

Guest · Post by **Guest** » Fri Aug 01, 2008 1:13 pm

Ehm What inch guns are the mains?
Bcs those us arizona class 14'' guns as 2nd..
Then u need 16-18'' guns as main..
like the Kriegsmarine whas planning for the 2nd H class battleships
h39-h44
bismarck whas h26 i thought
Usa haves 16'' and whas planning for 18'' on montana class
So..
And btw nice job

Really looks good!

Mitch

The Ship Model Forum

Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.

Re: Mega BB in progress.