The Ship Model Forum

Hope this aids you.

Cheers,
George

Wow! Those are awesome! Thanks George...I'll download them to my PC and review them before I go any further on Agincourt. Guess it's a good thing I've been too busy to build lately!

EDIT: Looks like my "stanchions" to hold the up bridge are a little off (actually, just one) as compared to this drawing, but I'm not sure I'll change it. Also, the large cylindrical item on the starboard bridge - is that an insulator for the aerials? I know Invincible carried something similar, and was only on the starboard side. Pity their is only a view of one side of the bridge.

_________________
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery

Martin,

The large cylinder is the 6" gun director and one is located on the port and starboard side of the bridge.

Cheers,
George

George,

Many thanks!

_________________
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery

Looks to me like the mainmast (and the searchlights) are painted black in this photo. Anyone care to hazard a guess?

_________________
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery

i would guess it is black ,i think the reason for this is the mast would get black from smoke from the boilers anyhow, i believe kgv class did the same.

I too vote for black.

Hi,

Picture is of HMS Agincourt in 1918 with HMS Erin. Here is another picture taken in 1918; no black, this would be contrary to Grand Fleet painting.

Cheers,
George

Perhaps it's soot, not paint, and it is clean off after each sortie.

_________________
Assessing the impact of new area rug under modeling table.

Hi George
what your highlighting is the constant change seen in thes ships during wartime. Painting the ship was a occasional event and she will have had black top-masts and the grey you show at different periods in her career.

The RN used to, and still does, paint the top masts black as it hides funnel dirt.

My best

Thanks for the superstructure pictures - I'm scratch building my own model of Gin Palace and they are VERY useful!

Hello all. I am building ISW's 1/350 Agincourt, 1916 config as the kit state. Well, until now I was not able to find good pictures for the forward and aft superstructures for this year (and there is not so much for earlier configs, either).
The aft superstructure in particular NEEDS a set of supports to be sustainable... Any help really appreciated!

_________________

https://stefsap.wordpress.com

HMS Erin Builders Model
An updated ink to the David Ross photos now on the Finewaterline site: http://www.finewaterline.com/pages/albums/erin/hms_erin_builders_model.html
and an example:


Cheers,
George

Are there any recommended resources for Erin/Agincourt builds? I saw the CG WIP pictures of Agincourt's upperworks, which will help. Was this model ever finished?

_________________
- Chris

I just received my Combrig 1/700 Agincourt and well, first the positives: The hull is feakin awesome! The level of detail here is amazing. I can stare at it for hours, really. The superstructure parts are likewise lovely and I can't wait to see them painted and put together.

The drawings included are also fantastic. The level of detail I can add, just from these makes me want to start building.

Negatives would be the packaging. All of the parts other than the hull are in one bag, with the hull free in a wide box and (most likely during shipping) a number of the gun barrels are broken off. To be fair, I have not contacted either seller or manufacturer because I'm not sure whether it's much of a problem for me since I was probably going to scratch-build my own barrels any way.

Still, such a lovely kit deserves a better fitting box and maybe a couple of separate bags for the small parts to ride in.

Overall I give the kit high marks.

_________________
The most attractive project, to me, is the one that I've just heard someone say can't be done.

Is anyone aware of any PE sets offered for the Agincourt?

I'd actually be interested in PE that would have similar parts, since a lot of the fittings, boats and aerials would be similar to other British-builts of the period.

_________________
The most attractive project, to me, is the one that I've just heard someone say can't be done.

I think most builders have made the most use out of WEM's Tiger class and WWI British Battleship sets:
https://www.whiteensignmodels.com/p/WEM ... gpW8WiPKuU
https://www.whiteensignmodels.com/p/WEM ... gpWoWiPKuU

More recently, they also put out a set for Trumpy's WWI QE kit, which should also have some usable bits: https://www.whiteensignmodels.com/p/WEM ... gpXnWiPKuU

Here's Martin Quinn's build of the Combrig kit using bits, bobs, and the WEM Tiger fret: http://www.modelwarships.com/reviews/sh ... Palace.htm

_________________
De quoi s'agit-il?

Thanks!

I've been fascinated with the ship for years and even had the privilege of friendship with someone who served on her. When I build her there will be a few very subtle details added as a sort of memorial to them and the stories they shared.

_________________
The most attractive project, to me, is the one that I've just heard someone say can't be done.

The long-awaited Flyhawk Agincourt has now received a box art and some parts have been tooled! Shown at the 2019 All Japan Hobby Show: https://twitter.com/HobbylandOsaka/stat ... 1282855936

_________________
De quoi s'agit-il?

Dont know if this has been posted before but this is a very accurate information for all the changes in HMS Agincourt during various dates in WWI.