Postwar navy.

gtb -red · Post by **gtb -red** » Sun Apr 26, 2009 8:42 am

Nice work J.

orb · Post by **orb** » Sun Apr 26, 2009 2:24 pm

Hi guys,

both builds look brilliant! I agree, some people would certainly add life to your carrier John. I've used a few of the Eduard figures and I think they're really nice actually. I'm planning on using them for my LHD, too.

Nektarios · Post by **Nektarios** » Sun Apr 26, 2009 10:32 pm

J Goodacre wrote:Orb, thanks for posting the show pics. I think I am finally finished with my first CVN, except my wife mentioned that it should have some crew rather than being a ghost ship. Has any one used the 1/700 Eduard Ship Photo Etch Aircraft Carrier Figures (Painted)?

Soon I will start on the LHD 7 USS Iwo Jima. I already have the decals from Starfighter and the AV-8Bs, AH-1s, UH-1 from WEM. Next I will need to get some CH46s and CH53s and the PE. First I need to figure out the flight deck arrangement.

John

Fantastic build John.

I have used Eduard figures and i m pleased with the result. They give you the opportunity to give life to your carrier. I m sure you will impress us once more with your next build too.

Happy modelling.

NukeMM · Post by **NukeMM** » Mon Apr 27, 2009 6:40 am

Beautiful CVN-71, Mr. Goodacre!! Very clean! Very sharp and crisp! I hope that I do as well when I get around to building carriers. Yours will be a fine sample to follow for reference.

I've always liked the looks of the Delta IIIs, Nekatrios! Nicely done!

Thanks, Orb, for posting the photos of the model fair. A 1/175 scale carrier? Do they make aircraft in that scale? It is spectacular!

NukeMM · Post by **NukeMM** » Mon Apr 27, 2009 7:33 am

Here are some projects that I have been working on.

My fictitious navy base diorama

And the 1/700 BFM USCGC Tamaroa

arnobiz · Post by **arnobiz** » Mon Apr 27, 2009 7:39 am

Great looking CVN-71, congratulations!

kidcurrie42 · Post by **kidcurrie42** » Mon Apr 27, 2009 7:52 am

The Delta III looks great Nektarios

Great build of CVN-71 John, you captured that busy look very well, figures may add a little extra, but still looks superb without them

Diorama is coming along well there Carl, i am looking forward to seeing it progress

Nice builds Guys

Happy modeling

John

orb · Post by **orb** » Mon Apr 27, 2009 9:53 am

NukeMM wrote: Thanks, Orb, for posting the photos of the model fair. A 1/175 scale carrier? Do they make aircraft in that scale? It is spectacular!

I don't think I've ever seen aircrafts in that scale, I think they might just be 1/144 aircrafts.

NukeMM wrote:Here are some projects that I have been working on.

My fictitious navy base diorama

And the 1/700 BFM USCGC Tamaroa

Looks awesome! Both the ship and the diorama. What are the dimensions of the base... and what about the water? That looks great!

NukeMM · Post by **NukeMM** » Mon Apr 27, 2009 10:33 am

Heiko,

The water area measures about 14" x 23" and is made with PLASTRUCT's clear "Agitated Water" plastic sheet that I painted over the top of with Dark Sea Blue enamel spray, Model Master Acrylic greens, and topped with Model Master Lacquer Gloss coat.

I made the wood base, myself, and routered a grove around the perimeter to accommodate a custom plexiglass case that has yet to be ordered through my local trophy shop.

The docks and buildings are from BFM and the crane is from the Skywave Drydock kit.

Nektarios · Post by **Nektarios** » Mon Apr 27, 2009 12:15 pm

NukeMM wrote:Here are some projects that I have been working on.
My fictitious navy base diorama and the 1/700 BFM USCGC Tamaroa

Both look awesome Carl. Looking forward to seeing more of both.

orb · Post by **orb** » Mon Apr 27, 2009 3:38 pm

NukeMM wrote:Heiko,
The water area measures about 14" x 23" and is made with PLASTRUCT's clear "Agitated Water" plastic sheet that I painted over the top of with Dark Sea Blue enamel spray, Model Master Acrylic greens, and topped with Model Master Lacquer Gloss coat.

I made the wood base, myself, and routered a grove around the perimeter to accommodate a custom plexiglass case that has yet to be ordered through my local trophy shop.

The docks and buildings are from BFM and the crane is from the Skywave Drydock kit.

Thanks Carl for the info! The water already looks excellent, looking forward to the end result with the ships!

J Goodacre · Post by **J Goodacre** » Mon Apr 27, 2009 4:24 pm

Thank you everyone for the kind comments. I think I will be ordering some crew to finish it off. Carl, that will be an impressive diorama best of luck.

John

Nektarios · Post by **Nektarios** » Wed Apr 29, 2009 11:51 am

This is something i started this weekend. Some small sub dioramas.

I guess i m affected by the fantastic dioramas presented by Carl, Heiko and John. This is something to get started on dioramas. Almost my first attempt. Not something much. I ll post more photos when finished.

Any questions or comments are welcome.

Happy modelling

orb · Post by **orb** » Wed Apr 29, 2009 12:36 pm

That's pretty cool, Nektarios! How do you make the water? I'm glad I could help persuade you to start some dioramas

Nektarios · Post by **Nektarios** » Wed Apr 29, 2009 1:34 pm

orb wrote:That's pretty cool, Nektarios! How do you make the water? I'm glad I could help persuade you to start some dioramas

The water isn t something much. I just painted the bases provided for the Arii subs. I think it looks rather good with a little effort Next step in the diorama process is to make my own simple water base in a port diorama.

NukeMM · Post by **NukeMM** » Wed Apr 29, 2009 2:13 pm

Nektarios wrote:This is something i started this weekend. Some small sub dioramas.

I guess i m affected by the fantastic dioramas presented by Carl, Heiko and John. This is something to get started on dioramas. Almost my first attempt. Not something much. I ll post more photos when finished.

Any questions or comments are welcome.

Happy modelling

Looks like you got your feet wet in the water effect business! Good job!

For my navy base dio I used Plastruct's clear "agitated water" which comes in a sheet 14" x 24" or so. I used a whole sheet on my navy base dio, but it is easily cut into pieces. I wasn't sure how I'd conceal any seams in the water if I used more than one large sheet, so my dio is just the size of one of the large sheets.

I'm not sure what one could do with the Plastruct stuff for submarines. If the boats are cut exactly to the water line, it would work I'd think, but if not, you'd need to sink them into the water medium like you've done, above. I don't intend on putting any subs in my dio.

NukeMM · Post by **NukeMM** » Wed Apr 29, 2009 2:49 pm

Thanks to Kenny Loup and his Tamaroa decals and my own red and blue stripe decals, my model is continuing to shape up.

arnobiz · Post by **arnobiz** » Wed Apr 29, 2009 3:23 pm

Congratulations, it looks really good and it's quite nice to see a ship in colours

ASFC · Post by **ASFC** » Wed Apr 29, 2009 4:37 pm

Doctor.....doctor......I forgot to take my medication........................................................

I seem to have sprouted another AOR.

Happy modeling.

p.s. Thats a fine CG Cutter Carl!

Harry @ BFM · Post by **Harry @ BFM** » Wed Apr 29, 2009 5:16 pm

Lookin pretty good, Carl.

The Ship Model Forum

Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.

Re: Postwar navy.