1/350 USS New (DDE-818)
Moderators: BB62vet, MartinJQuinn, JIM BAUMANN, Jon, Dan K
-
Russ2146
- Posts: 2126
- Joined: Tue Nov 03, 2009 9:28 pm
- Location: Egg Harbor Twp, NJ
Re: 1/350 USS New (DDE-818)
Christian,
What you label as an air pipe is actually the lead in tube from the long wire radio antennas to the radio shack which is under the starboard twin 40mm mount.
The rounded end of it is actually a ceramic insulator with a metal bolt in the very center to attach the antenna wire. The ceramic had a reddish brown glaze on it. The antenna wire ran up to the yard arm level of the mast and split there with several wires running to the aft stack.
Figure 3-32 on the following page gives the deneral idea.
http://www.virhistory.com/navy/antenna.htm
Russ
What you label as an air pipe is actually the lead in tube from the long wire radio antennas to the radio shack which is under the starboard twin 40mm mount.
The rounded end of it is actually a ceramic insulator with a metal bolt in the very center to attach the antenna wire. The ceramic had a reddish brown glaze on it. The antenna wire ran up to the yard arm level of the mast and split there with several wires running to the aft stack.
Figure 3-32 on the following page gives the deneral idea.
http://www.virhistory.com/navy/antenna.htm
Russ
Russ
- Christian Bruer
- Posts: 574
- Joined: Tue Nov 21, 2006 7:44 am
- Location: Germany
- Contact:
Re: 1/350 USS New (DDE-818)
Hi Russ,Russ2146 wrote:Christian,
I'm doing the USS Barton, DD 722 as she was in the mid-1960s.
a nice project
Cheers,
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
- navydavesof
- Posts: 3127
- Joined: Thu Mar 05, 2009 10:38 pm
Re: 1/350 USS New (DDE-818)
Christian,
Do you have any updates at all concerning this project? We would all love to see anything else you have done!
Do you have any updates at all concerning this project? We would all love to see anything else you have done!
Proper Preparation Prevents Poor Performance
-
vnaff5
- Posts: 4
- Joined: Mon Oct 03, 2005 9:24 am
- Location: San Jose, CA
Re: 1/350 USS New (DDE-818)
Hi Christian,
As followed your WIP, I noticed one picture that you tried to test the hedgehog on DDR conversion. A DDR conversion you�re built is Destroyer Escort Radar (DER) picket? If it�s true I would like to know what kit & scale of that DDR. Many of my friends want to build DER USS 251 Camp but couldn�t find the right kit and Mk 22 gun. Really appreciate your help and thanks in advance.
As followed your WIP, I noticed one picture that you tried to test the hedgehog on DDR conversion. A DDR conversion you�re built is Destroyer Escort Radar (DER) picket? If it�s true I would like to know what kit & scale of that DDR. Many of my friends want to build DER USS 251 Camp but couldn�t find the right kit and Mk 22 gun. Really appreciate your help and thanks in advance.
- Christian Bruer
- Posts: 574
- Joined: Tue Nov 21, 2006 7:44 am
- Location: Germany
- Contact:
Re: 1/350 USS New (DDE-818)
Hi Dave,navydavesof wrote:Christian,
Do you have any updates at all concerning this project? We would all love to see anything else you have done!
I'm very pleased by you interest, but I'm sorry, there is no update at the moment. Only the boot topping is still painted black.
I have finished my HMS Glowworm last month, but I have a lot of real work to do at the moment, so there is only less time for modelmaking. Also there are some more projects next to USS New and I can't decide what to finish resp. to restart next
But promised, I will post any progress on USS New here in MW.com!
Hi vnaff5,vnaff5 wrote:Hi Christian,
As followed your WIP, I noticed one picture that you tried to test the hedgehog on DDR conversion. A DDR conversion you�re built is Destroyer Escort Radar (DER) picket? If it�s true I would like to know what kit & scale of that DDR. Many of my friends want to build DER USS 251 Camp but couldn�t find the right kit and Mk 22 gun. Really appreciate your help and thanks in advance.
my mistake, it was not a DDR but a DER conversion! Yes, I have one in progress, I would like to build USS Calcaterra (DER-390) in scale 1/350. I start this conversion at the beginning of 2009. I have used Trumpeters USS England as a basic, the superstructure was made of some plastic platting, masts and stack of some plastic tube and rod. The Mk. 22 guns are loaned from JAGs Ashville PG. If you have some more questions, feel free to contact me via this WIP or send me a PM.
Cheers,
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
-
vnaff5
- Posts: 4
- Joined: Mon Oct 03, 2005 9:24 am
- Location: San Jose, CA
Re: 1/350 USS New (DDE-818)
Hi Christian,
Thank you for posting your beautiful DER and replying my message. I really interest your DER conversion build but can't access to your pm, could you send me hello message to my email vnaff5@yahoo.com Thanks
Thank you for posting your beautiful DER and replying my message. I really interest your DER conversion build but can't access to your pm, could you send me hello message to my email vnaff5@yahoo.com Thanks
- Christian Bruer
- Posts: 574
- Joined: Tue Nov 21, 2006 7:44 am
- Location: Germany
- Contact:
Re: 1/350 USS New (DDE-818)
Yep, donevnaff5 wrote:Hi Christian,
... could you send me hello message to my email vnaff5@yahoo.com Thanks
Cheers,
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
-
Russ2146
- Posts: 2126
- Joined: Tue Nov 03, 2009 9:28 pm
- Location: Egg Harbor Twp, NJ
- navydavesof
- Posts: 3127
- Joined: Thu Mar 05, 2009 10:38 pm
Re: 1/350 USS New (DDE-818)
Has there been any progress on this incredible build?
Proper Preparation Prevents Poor Performance
- Christian Bruer
- Posts: 574
- Joined: Tue Nov 21, 2006 7:44 am
- Location: Germany
- Contact:
Re: 1/350 USS New (DDE-818)
Hi Dave,
sorry no, she's still in the yard. I start painting the boot topping for a while, but found some marks (need some more sanding) along the waterline. So far I left her untouched because of some other RN ships I'd like to finish.
To much models and only less time. Stay tuned, don't know when but I will finish her
sorry no, she's still in the yard. I start painting the boot topping for a while, but found some marks (need some more sanding) along the waterline. So far I left her untouched because of some other RN ships I'd like to finish.
To much models and only less time. Stay tuned, don't know when but I will finish her
Cheers,
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
-
Jennings
- Posts: 106
- Joined: Wed Apr 27, 2005 10:54 pm
- Location: Newport, VA
Re: 1/350 USS New (DDE-818)
I'm **really** late to this party, but WOW! Christian, you're an inspiration! I hope my Orleck comes out 10% as nice as what you've done so far. Any more progress since 2010??
J
J
- Christian Bruer
- Posts: 574
- Joined: Tue Nov 21, 2006 7:44 am
- Location: Germany
- Contact:
Re: 1/350 USS New (DDE-818)
Jennings, thanx for your very kind comment and your interest. Yep, I put a lot of work into the model but there is no progress since 2010. I'm not to fancy to work on the model and changed my interest to Royal Navy and German Navy ships. All the parts are well packed and maybe I start working again some day. But working on the model was a good experience to super detail a ship model with self made parts, so it was not for nothing!Jennings wrote:I'm **really** late to this party, but WOW! Christian, you're an inspiration! I hope my Orleck comes out 10% as nice as what you've done so far. Any more progress since 2010??
J
Cheers,
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany
Christian
_________________
AKA "Painter"
VMF'06 - German Gamblers
Veritable Modelling Friends 2006, Germany