CVN 65 Hangar Deck Custom Decals

Post by **Jon** » Wed Jul 16, 2008 9:25 am

Hey rouyax,

I love your work and the photography is excellent. Keep it coming. I can't wait to get further into my Enterprise!

gtb -red · Post by **gtb -red** » Wed Aug 06, 2008 10:38 pm

How did you make the weapons for the bugs. very well done.

rouyax · Post by **rouyax** » Thu Aug 07, 2008 7:51 am

Gtb,

All airplanes are tamiya as i don't like the look from those from trumpeter, but fuel tanks and jammer pods come from trumpeter's new plane kits ref 6236 and 6237. Open canopies come also from trumpeter for F14's and F18's, for prowlers, i've cut and glued those from the half bodies from trump.

All armament come from GHQ Micro Armour, ref AC28, link : http://www.ghqmodels.com/store/ac28.html, they come in 1/285th scale in white metal, are a little bit oversized but they look great once installed on planes ! Sparrows make good Harm missiles (once the fins are square cut), GBU-16 make good GBU-24 (fins square cut), GBU-12 are ok, Sidewinders (only the M model) are OK and Mk-82's make good Mk-83's !!! I've bought 10 packs and believe me, it might not be enough !!

Thanks to Kelly Quirk EXCELLENT how-to pages for building his Uss Enterprise, for seats and consoles in open canopies, Wallgreen plastic is used for scratch.
I haven't tried yet kelly's method for making clear open canopies

Concerning your PM about the look of CVAN-65 hangar bay markings in 1962-1964 era, If anyone has good pics for the hangar in that era, post them and i'll adapt the sheet.

SteelNavy88 · Post by **SteelNavy88** » Mon Oct 26, 2009 5:37 pm

Rouyax,
I was impressed on how you did a superb job that you did on the two decal sheets for the CVW-8. Do you have any plans to produce the 1:350th scale set of decals for CVW-1 that is currently with the Enterprise CVN-65? the air wing consists of the squadrons: VFA-11 Red Rippers; VFA-211 Fighting Checkmates; VFA-136 Knight hawks; VMFA-251 Thunderbolts; VAQ-137 Rooks; VAW-123 Screwtops; and HS-11 Dragonslayer.

Thank you for looking into this matter, and for your help.

Loren
Wooster, Ohio

E-mail: SteelNavy88

rouyax · Post by **rouyax** » Tue Oct 27, 2009 4:01 am

PM me, I'll see what I can do, I've been rather lazy with decal production lately....

medhawk020 · Post by **medhawk020** » Sun Feb 20, 2011 1:20 am

I looking for a complete set of Decals for the 1/350 Enterprise CVN-65 Hanger deck?? Also both sides of the blast door!! Can anybody help??

rouyax · Post by **rouyax** » Sun Feb 20, 2011 3:59 pm

medhawk020 wrote:I looking for a complete set of Decals for the 1/350 Enterprise CVN-65 Hanger deck?? Also both sides of the blast door!! Can anybody help??

If you have hires pics of the blast door drawings other than those from D&S book, I can include them. Otherwise PM me for the existing sheet.

SteelNavy88 wrote:Rouyax,
I was impressed on how you did a superb job that you did on the two decal sheets for the CVW-8. Do you have any plans to produce the 1:350th scale set of decals for CVW-1 that is currently with the Enterprise CVN-65? the air wing consists of the squadrons: VFA-11 Red Rippers; VFA-211 Fighting Checkmates; VFA-136 Knight hawks; VMFA-251 Thunderbolts; VAQ-137 Rooks; VAW-123 Screwtops; and HS-11 Dragonslayer.

Thank you for looking into this matter, and for your help.

Loren
Wooster, Ohio

E-mail: SteelNavy88

Good news, I've begun work on CVW-1 2006, doesn't include VFA-11 though... but S-3's were still embarked. Touchdown in a few months. Here are the prelim drawings :

medhawk020 · Post by **medhawk020** » Sun Feb 20, 2011 4:30 pm

Any decals I can get would be most helpful

Email me at medhawk020@yahoo.com or phillip.sheridan@us.army.mil

medhawk020 · Post by **medhawk020** » Sun Feb 20, 2011 5:06 pm

rouyax wrote:
medhawk020 wrote:I looking for a complete set of Decals for the 1/350 Enterprise CVN-65 Hanger deck?? Also both sides of the blast door!! Can anybody help??
If you have hires pics of the blast door drawings other than those from D&S book, I can include them. Otherwise PM me for the existing sheet.

SteelNavy88 wrote:Rouyax,
I was impressed on how you did a superb job that you did on the two decal sheets for the CVW-8. Do you have any plans to produce the 1:350th scale set of decals for CVW-1 that is currently with the Enterprise CVN-65? the air wing consists of the squadrons: VFA-11 Red Rippers; VFA-211 Fighting Checkmates; VFA-136 Knight hawks; VMFA-251 Thunderbolts; VAQ-137 Rooks; VAW-123 Screwtops; and HS-11 Dragonslayer.

Thank you for looking into this matter, and for your help.

Loren
Wooster, Ohio

E-mail: SteelNavy88
Good news, I've begun work on CVW-1 2006, doesn't include VFA-11 though... but S-3's were still embarked. Touchdown in a few months. Here are the prelim drawings :

C-2'S CVW1 2006 Profile_redimensionner.jpg

F-18C - VFA-86 CAG - CVW-1 2006_redimensionner.jpg

S-3B - VS-32 CAG - CVW-1 2006_redimensionner.jpg

S-3B - VS-32 CO - CVW-1 2006_redimensionner.jpg

S-3B - VS-32 LINE BIRD - CVW-1 2006_redimensionner.jpg

medhawk020 wrote:Any decals I can get would be most helpful

Email me at medhawk020@yahoo.com or phillip.sheridan@us.army.mil

rouyax · Post by **rouyax** » Sun Feb 20, 2011 5:07 pm

medhawk020 wrote:Any decals I can get would be most helpful

Email me at medhawk020@yahoo.com or phillip.sheridan@us.army.mil

Email sent.

gtbred · Post by **gtbred** » Mon Feb 21, 2011 12:15 pm

Glad to see your stuff again Rouyax. maybe getting a e-mail from me in a week or so.

rouyax · Post by **rouyax** » Mon Feb 21, 2011 2:28 pm

gtbred wrote:Glad to see your stuff again Rouyax. maybe getting a e-mail from me in a week or so.

Sure, you'll be welcomed. Very good work on your sarra and forrestal!

Kyle97 · Post by **Kyle97** » Sun Feb 27, 2011 5:32 pm

Dear Sir,

How can I go about getting the decals you have made for the USS Enterprise in 2001, the squadrons as well as the hangar deck?

Thank You

rouyax · Post by **rouyax** » Tue Mar 01, 2011 12:00 pm

Kyle97 wrote:Dear Sir,

How can I go about getting the decals you have made for the USS Enterprise in 2001, the squadrons as well as the hangar deck?

Thank You

Mail sent

medhawk020 · Post by **medhawk020** » Wed Mar 02, 2011 11:32 am

rouyax wrote:
Kyle97 wrote:Dear Sir,

How can I go about getting the decals you have made for the USS Enterprise in 2001, the squadrons as well as the hangar deck?

Thank You
Mail sent

Do you have any other decals that could help me with this build???? I would like my enterprise to look right for 1996 time frame

rouyax · Post by **rouyax** » Wed Mar 02, 2011 12:53 pm

medhawk020 wrote:

Do you have any other decals that could help me with this build???? I would like my enterprise to look right for 1996 time frame

Can you be more specific about what you're looking for?

I suspect you may need this :

youngtiger1 · Post by **youngtiger1** » Thu Mar 03, 2011 1:01 am

Hey rouyax,

I'm new at this site and I've just purchased a tamiya 1/350 USS Enterprise. I'm going to try and make it as accurate as possible with complete hanger and all. I read this thread and saw your sample pics the hanger markings. Do you still have those? Are you just providing the artwork or are you able to print them as well? I would have emailed you but I have not figured out how to send messages on this site. Anyway, please let me know if you can help. TIA.

Mike

rouyax · Post by **rouyax** » Thu Mar 03, 2011 2:37 am

youngtiger1 wrote:Hey rouyax,

I'm new at this site and I've just purchased a tamiya 1/350 USS Enterprise. I'm going to try and make it as accurate as possible with complete hanger and all. I read this thread and saw your sample pics the hanger markings. Do you still have those? Are you just providing the artwork or are you able to print them as well? I would have emailed you but I have not figured out how to send messages on this site. Anyway, please let me know if you can help. TIA.

Mike

Decals are provided as a ready to print PDF, it'll be your Job to print them on decal paper. PM me to get the file.

youngtiger1 · Post by **youngtiger1** » Thu Mar 03, 2011 3:29 am

Hi,

I still have not figured out to send pm/messages on this site. Do you mind sharing your email address so i can email you direct?

Mike

youngtiger1 · Post by **youngtiger1** » Thu Mar 03, 2011 3:32 am

Here is my email if that is easier...

bowentouch........@........yahoo.com

( remove dots)

TIA, Mike

----------------------------------------------------------------------------------------------

.edit by Jim Baumann:

fao: Youngtiger.

I have modified the display of your e-mail address slightly to prevent you getting unwanted spam ..

The Ship Model Forum

CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals

Re: CVN 65 Hangar Deck Custom Decals