1/350 New Plastic Kit Poll
Moderators: MartinJQuinn, Timmy C, Gernot, HMAS
-
Manteuffel
- Posts: 34
- Joined: Tue Apr 19, 2011 3:14 pm
- Location: Praha, CZ
Re: 1/350 New Plastic Kit Poll
K.u.K. Viribus Unitis /Tegetthof
K.u.K. Admiral Spaun
K.u.K. Zenta etc...
Seamen on these ships were from more then 7 nowadays countries:-)
ORP Orzel pre WW2
ORP Burza/Wicher
ORP Blyskawica/Grom
WW2 light and heavy cruisers + destroyers.
And othere pre WW1 ships.
Russo x Japanese 1905 war ships, Soviet x Finnish 1940 war ships.
K.u.K. Admiral Spaun
K.u.K. Zenta etc...
Seamen on these ships were from more then 7 nowadays countries:-)
ORP Orzel pre WW2
ORP Burza/Wicher
ORP Blyskawica/Grom
WW2 light and heavy cruisers + destroyers.
And othere pre WW1 ships.
Russo x Japanese 1905 war ships, Soviet x Finnish 1940 war ships.
-
NukeMM
- Back-Aft Models

- Posts: 2980
- Joined: Tue Feb 05, 2008 12:44 am
- Location: Omaha, NE, USA
Re: 1/350 New Plastic Kit Poll
When I voted for a CVE my thoughts are of the USS Commencement Bay CVE-105 class.
Carl Musselman
(Formerly Back-Aft Models)
Photobucket
https://app.photobucket.com/u/carlomaha
YouTube Channel:
https://www.youtube.com/channel/UCcH4XX ... IHgFtIYhAg
(Formerly Back-Aft Models)
Photobucket
https://app.photobucket.com/u/carlomaha
YouTube Channel:
https://www.youtube.com/channel/UCcH4XX ... IHgFtIYhAg
- sundowner
- Posts: 40
- Joined: Sat Apr 23, 2011 3:07 pm
- Location: Nelson, New Zealand
Re: 1/350 New Plastic Kit Poll
I'll vote for an SCB 125 Essex or a Midway. About time we had one!!!!
- MM2CVS9
- Posts: 153
- Joined: Wed Oct 01, 2008 10:17 am
Re: 1/350 New Plastic Kit Poll
I'll vote for the ESSEX class angled deck SCB 125.
EJ
EJ

" 1/700Hasegawa 45
" 1/700Dragon 44
" 1/700Trumpeter 43
" 1/540Revell vintage 62
" 1/350Trumpeter 42
Fair Winds and Following Seas
- robertmelvin
- Posts: 2025
- Joined: Thu Aug 19, 2010 11:39 am
- Location: Harlan, Kentucky, U.S.A.
Re: 1/350 New Plastic Kit Poll
It isn't on the list of options, but it gives me an opportunity to pose one of those questions that nag me. One of the ships that seems, year after year, to top the list of the "most wanted" ship models in any scale (how about a 1/200 on this one!) is the U.S.S. Enterprise CV-6. This is perhaps the most iconic warship of World War II, certainly the most iconic U.S. warship of that time. We have kits of Hornet, Lexington and Saratoga, but no Enterprise. Also, she was the only ship of her class to see service from Pearl Harbor to the surrender of the Empire of Japan. Does anybody have any thoughts on why somebody, Trumpeter perhaps, or Tamiya, does not seem to be interested in what I suspect, if it is a decent kit, would fly off the shelves were it released?
Like to see what everybody thinks.
Bob
Like to see what everybody thinks.
Bob
Give me a fast ship, for I would like to get out of harm's way!
- Timmy C
- Posts: 12472
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: 1/350 New Plastic Kit Poll
Because Trumpeter messed up their Hornet, so their sales were not stellar, and other manufacturers attributed this poor sales due to the lack of interest in the class of the vessel, rather than on Trumpeter's mistake.
De quoi s'agit-il?
- Ady
- Posts: 523
- Joined: Tue Feb 15, 2011 4:16 pm
Re: 1/350 New Plastic Kit Poll
The first Battlecruiser HMS Invincible, as built, to go with my Dreadnought when I get it! Then I really will be happy, although I really will be short on space 
NVNC EST BIBENDVM
- Atma
- Posts: 3134
- Joined: Fri Apr 16, 2010 6:47 pm
- Location: Oslo, Norway
Re: 1/350 New Plastic Kit Poll
We can only dream for those, sadly.Manteuffel wrote:K.u.K. Viribus Unitis /Tegetthof
K.u.K. Admiral Spaun
K.u.K. Zenta etc...
As for me, I want HMS Nelson class, IJN Hiei, IJN Hyuga(all gun) and IJN Amagi !
-
mermaid
- Posts: 214
- Joined: Mon Apr 18, 2011 1:30 pm
Re: 1/350 New Plastic Kit Poll
Hi!
Why the moderators did not include any Soviet Union Navy of WWII in their list?
After all, the country has won the war.
And its important to note that NONE of WWII Soviet navy ships was ever represented by any manufacturer in a decent scale.
And we are not talking of insignificant subjects but some of 24.800 tone displacement.
My vote goes for battleships:
"Marat",
"Oktyabrskaya Revolutsiya",
"Sevastopol".
cruisers
"Profintern",
"Chervona Ukraina",
Russian Imperial Navy battleships "Imperatritsa Yekaterina" ,
"Imperatritsa Mariya",
"Volya".

Why the moderators did not include any Soviet Union Navy of WWII in their list?
After all, the country has won the war.
And its important to note that NONE of WWII Soviet navy ships was ever represented by any manufacturer in a decent scale.
And we are not talking of insignificant subjects but some of 24.800 tone displacement.
My vote goes for battleships:
"Marat",
"Oktyabrskaya Revolutsiya",
"Sevastopol".
cruisers
"Profintern",
"Chervona Ukraina",
Russian Imperial Navy battleships "Imperatritsa Yekaterina" ,
"Imperatritsa Mariya",
"Volya".
- robertmelvin
- Posts: 2025
- Joined: Thu Aug 19, 2010 11:39 am
- Location: Harlan, Kentucky, U.S.A.
Re: 1/350 New Plastic Kit Poll
I'm not buying "lack of interest". As nearly as I can tell, among 1/350 ship builders, at least in the U.S., CV-6 is something like the Holy Grail. There may be limited interest in the rest of the world, but I can't believe that there isn't sufficient "interest" in a 1/350 injection kit of the most decorated U.S.N. ship of World War 2 to justify production. If there is enough interest to support a new tool release of Gambier Bay or Independence, I'm sure the interest in CV-6 is there.Timmy C wrote:Because Trumpeter messed up their Hornet, so their sales were not stellar, and other manufacturers attributed this poor sales due to the lack of interest in the class of the vessel, rather than on Trumpeter's mistake.
Bob
Give me a fast ship, for I would like to get out of harm's way!
- Atma
- Posts: 3134
- Joined: Fri Apr 16, 2010 6:47 pm
- Location: Oslo, Norway
Re: 1/350 New Plastic Kit Poll
If you insist to call USS Enterprise by the hull classification code there is never gonna be a 1/350 or 1/700 USS Enterprise in the market.
- robertmelvin
- Posts: 2025
- Joined: Thu Aug 19, 2010 11:39 am
- Location: Harlan, Kentucky, U.S.A.
Re: 1/350 New Plastic Kit Poll
Atma, nobody is suggesting it be marketed as "CV-6". But on this board it is not uncommon for ships to be referred to by their hull numbers, since in many cases different ships have had the same name. For instance, both CV-6 and CVN-65 have been named "Enterprise". There have been two different World War II destroyers with the name "Laffey". This is simply board shorthand to reduce confusion.
Bob
Bob
Give me a fast ship, for I would like to get out of harm's way!
-
Mike G
Re: 1/350 New Plastic Kit Poll
I'm tired of boring WWII ships, it's time to get on with the Cold War like:
Nimitz 2000's
Forrestal 1990's
Kittyhawk 2004
JFK 2004
Iowa 1990's
Leahy 1980's
BainBridge 1990's
Virginia 1980's-90's
Spruance
Kidd
Arleigh Burke 2000's
LA
Virginia
Seawolf
Ohio
Perry
ashville
Sacramento
Etc...... We need to act fast as these ships are starting to disappear
Nimitz 2000's
Forrestal 1990's
Kittyhawk 2004
JFK 2004
Iowa 1990's
Leahy 1980's
BainBridge 1990's
Virginia 1980's-90's
Spruance
Kidd
Arleigh Burke 2000's
LA
Virginia
Seawolf
Ohio
Perry
ashville
Sacramento
Etc...... We need to act fast as these ships are starting to disappear
- Timmy C
- Posts: 12472
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: 1/350 New Plastic Kit Poll
There, I shortened the list for you - the ones I removed are already available in 1/350 plasticMike G wrote:I'm tired of boring WWII ships, it's time to get on with the Cold War like:
Nimitz 2000's
Forrestal 1990's
Kittyhawk 2004
JFK 2004
Leahy 1980's
BainBridge 1990's
Virginia 1980's-90's
LA
Ohio
ashville
Sacramento
Etc...... We need to act fast as these ships are starting to disappear
De quoi s'agit-il?
-
Guest
Re: 1/350 New Plastic Kit Poll
Just joined, hello all! :-)
My main interest is warships pre 1920.
The kits I would like to see in 1/350 plastic are vessels which showed the transit from sail to steam, vessels from all nations. Those launched in the 1860's to 1870's...plenty of subjects, some strange ones too.
I suppose they are very niche...but we can dream. Although some pre-dreadnoughts are making it to plastic...More please!
Oh yeah, one vessel I wish somebody would do , is the Torpedo ram POLYPHEMUS . A very unusual vessel. Again very niche..vurtually unknown to the wider world.
Such is life :-)
Cheers
My main interest is warships pre 1920.
The kits I would like to see in 1/350 plastic are vessels which showed the transit from sail to steam, vessels from all nations. Those launched in the 1860's to 1870's...plenty of subjects, some strange ones too.
I suppose they are very niche...but we can dream. Although some pre-dreadnoughts are making it to plastic...More please!
Oh yeah, one vessel I wish somebody would do , is the Torpedo ram POLYPHEMUS . A very unusual vessel. Again very niche..vurtually unknown to the wider world.
Such is life :-)
Cheers
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: 1/350 New Plastic Kit Poll
And maybe a few RussiansMike G wrote:I'm tired of boring WWII ships, it's time to get on with the Cold War like:
Forrestal 1990's
Kittyhawk 2004
JFK 2004
BainBridge 1990's
Virginia 1980's-90's
Etc...... We need to act fast as these ships are starting to disappear
Kresta 2
Kara
Kashin
Kynda
and maybe the Neustrashimyy (I know it's not really a cold warship era but well hey nice ship anyway.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
-
Challenger3
Re: 1/350 New Plastic Kit Poll
The "County"Class is in effect at least two sub classes.Ideally a Norfolk circa 1941 as she appeared during the hunt for Bismark or in 1943 as dipicted on the hunt for Scharnhorst.Carrer wise one of the most active of the Class.
Alternativey, how about a Cornwall at the time of her demise to the Japanese.
Moving away from the beloved Counties, howabout an Exeter,Battle of the River Plate era!
Alternativey, how about a Cornwall at the time of her demise to the Japanese.
Moving away from the beloved Counties, howabout an Exeter,Battle of the River Plate era!
-
Challenger3
As an alternative
Quite simply,does anyone recall the old 50's movie of one of the most couragious incidents,post WW11, The Yagtze incident.How about an HMS Amethyst in 1/350th or better still even larger to 1/72nd as per the excellent Flower Class Corvette
- Rhynoman
- Posts: 10
- Joined: Sun Jan 16, 2011 12:11 pm
Re: 1/350 New Plastic Kit Poll
How about a modern AO, AOE, AE? There are no replenishment ships out there in 1/350
-
Busto963
- Posts: 372
- Joined: Sun Jul 31, 2011 6:18 pm
Re: 1/350 New Plastic Kit Poll
This.Rhynoman wrote:How about a modern AO, AOE, AE? There are no replenishment ships out there in 1/350
Also, what about a 1/350 Alska (CB-1), or Des Moines (CA-134)?