1/700 Post War USN - One of each class.

[NukeMM]

The USS Brooke DEG-1 is finally in the water and underway after residing in my navy base dio since about last summer.

[Bondoman]

Looking at that, I can no lie literally smell the salt air. Great photos as well.

[NukeMM]

I've started a new build; the new 1/700 Niko USS Cromwell DE-1014 (USS Dealey Class Destroyer Escort)

[NukeMM]

Niko 1/700 USS Cromwell DE-1014 PE attached and ready for some primer and paint.

[California Bound]

Carl,

Your railings look really good. It seems like you've made painting a lot harder. Is there some reason involving the resin that requires them to be placed so early? Or is this your standard way of doing things?

Dan.

[NukeMM]

Carl,

Your railings look really good. It seems like you've made painting a lot harder. Is there some reason involving the resin that requires them to be placed so early? Or is this your standard way of doing things?

Dan.

Thanks, Dan! I am enjoying your build, too.

Although, I hate to mask and paint. I've developed a technique for attaching railings, right to the resin/plastic, for better adhesion and I then use the railings as boundaries for my brush while painting the decks by hand after an over all airbrushing of the hull and bulkhead color. If I get a little deck paint on the bulkheads and railings, I just touch them up with a little thinned paint and a tiny manual brush. This method also covers the shinyness of the CA glue on the railings.

I'll leave railings off where, if they were in place, it would be impossible to get a manual brush into.

I would think, in my opinion, this is less tedious and time consuming as masking and painting. I have a hard time pulling paint off with masking tape, no matter what tips and tricks I follow.

Also, as a self-discipline issue, if I don't attach the railings, first, I may not be in the mood for quite some time to attach them later, in the final stages of the build.

Here is my USS Cromwell DE-1014 with a coat of primer and the mast is almost complete..............

[California Bound]

Carl,

Painting that way makes sense. The railing as a boundary is a good idea.


I'd try it but I can't paint a deck by hand very well. I don't like to mask either so I try to avoid it as much as possible. I think I have kind of built myself into a railing PE corner on this one.

Your mast is looking great.

Dan.

[Quincy]

I've seen Carl's models at the NAT's, and his technique/build process definitely works. His ships are beautiful. My fumble fingers couldn't do that.



Bob Pink.

[kidcurrie42]

Looking Good Carl, what primer do you use?

Happy Modeling

John

[NukeMM]

Thank you, John!

I used Mr. Surfacer 1200 primer on this one.

Here are some recent pics of the Cromwell.......ready for a black wash and decals.

[johndon]

Nice one as usual Carl, how long is she?

John

[NukeMM]

Thanks johndon!

She was 308' vessel, 5.25" model.

[johndon]

Thought she looked small Don't know how you do it...

John

[MartinJQuinn]

Sharp looking build, Carl.

[NukeMM]

Nearing completion................
(I know this is a "Completed Models" thread but,...........)

[NukeMM]

Launching of the Cromwell. She's in the water, today.

[orb]

Carl, I've just finished catching up on your work. What can I say... truly inspiring!

H.

[NukeMM]

Except for the wooden base, this one is finished!

NIKO 1/700 USS Cromwell DE-1014

[NukeMM]

[sirpaul]

beautiful little DE. The last of the small escorts. Excellent job.