G'day Guys,
I need some help identifying the HA/LA DCT with was fitted to the HMNZS Royalist during its modernisation refit of 1953-56, picture is attached.
If anybody has better images or can steer me in the right direction I would appreciate it.
High Angle / Low Angle Director Control Tower
Moderators: MartinJQuinn, JIM BAUMANN, HMAS, Tiny69, Dave Wooley
-
BillG
- Posts: 8
- Joined: Wed Dec 30, 2009 12:58 am
-
Umi_Ryuzuki
- Posts: 32
- Joined: Tue May 01, 2007 11:52 am
- Location: PDX,OR USA
- Contact:
Re: High Angle / Low Angle Director Control Tower
There are some small images of a 1/48 scale model HMNZS Royalist, by Dick Hopper on Warship Models Underway.
Not sure how much help they'll be.
http://wmunderway.8m.com/gallery1/gallery1.htm
Not sure how much help they'll be.
http://wmunderway.8m.com/gallery1/gallery1.htm
-
BillG
- Posts: 8
- Joined: Wed Dec 30, 2009 12:58 am
Re: High Angle / Low Angle Director Control Tower
G'day Umi,
Thanks for the link, i've looked at the photos unfortunately they're quite small, I've been buying as many photos of the Royalist that I find some a quite expensive and unfortunately most only show a head on shot of the tower. I'll have a go at building it from the photos I currentlty have.
Thanks for the link, i've looked at the photos unfortunately they're quite small, I've been buying as many photos of the Royalist that I find some a quite expensive and unfortunately most only show a head on shot of the tower. I'll have a go at building it from the photos I currentlty have.
- Mike Reading
- Posts: 197
- Joined: Fri Oct 17, 2008 11:47 am
- Location: East Sussex, England
Re: High Angle / Low Angle Director Control Tower
Hi the attached photos may not be precisely the same director but I hope they help you, especially the one taken from behind.
Mike
Mike
-
BillG
- Posts: 8
- Joined: Wed Dec 30, 2009 12:58 am
Re: High Angle / Low Angle Director Control Tower
G'day Mike,
Every picture helps.
Thanks, I appreciate you taking the time to post the pics.
cheers
Bill
Every picture helps.
Thanks, I appreciate you taking the time to post the pics.
cheers
Bill