OKB Grigorov

[Georgi Grigorov]

Lets see what we have here

[alberto_palmieri]

TR-1700........ !!



bow plane and propeller are photo each ?

box art ?

are available now ?

Regards

Alberto

[HMS Zulu]

Hi Georgi/Ray, i've just sent the plans off. Ray I can send the plans to yourself as well if they would be of interest?

Best regards, Rob

[Georgi Grigorov]

Hello Alberto

The bow planes are resin, but I usually do not shot them, the propeller is PE. And here is the boxart:

BTW if you have any comment about the way I name it, it the right time to let me know, before I send them for printing. As for availability, it�s available. And not only it:) I have few more new items.


Rob

Thank you, I receive the draws, it will be little difficult do to it only with them, but they are very good starting point for the geometry of the boat, and I will find some images for the details.
Regards
Georgi

[Atma]

Any news when theType 214, HMS Trafalgar and HMS Upholder/HMCS Victoria will be available ?

[Georgi Grigorov]

For now we have only TR1700 and this (hm, may be it�s a show of bad taste to put them together in one series):

Also waterline version of HMS Resolution and one small surface ship.
The rest must be ready at the end of this week or beginning of next.
Then will come the next series where we have 2 in 1/700 and one in 1/350

[alberto_palmieri]

Gerogi, how much TR-1700 ? I want get it and my nephew -he lives in Barcelona-, travel to Argentina for Chrismas. He is my postman....jejejej

May be get more that one TR1700.....

Alberto

[Georgi Grigorov]

The �Suggested retail price� is 11.7 EUR�which remind me that I must update my site. HMS Churchill (the same that all ignore) is at 18.4.

[Georgi Grigorov]

[Atma]

A dream came true !
Thank you

[Ray S]

Hi Georgi/Ray, i've just sent the plans off. Ray I can send the plans to yourself as well if they would be of interest?

Best regards, Rob

Rob, that would be great if you can do that. Will it be by PM? (not sure how these things work!). I REALLY appreciate this! You are a star.

Regards, Ray

[Georgi Grigorov]

Something more:

I have first 60 sets in my hand, at least the resin par, till the end of the week will fry to do the PE, and it will be ready.

[Felix B.]

Georgi,

What scale are the ironclads?

Felix

[Georgi Grigorov]

1/700 is the scale
There is funnel and boat as resin parts, and grilles over the vent shafts, gun port covers, railing, chain and anchor, davit and boat deck...may be something else but can't remember right now. May be when I finish the light cruiser's hull that I design right now will check.
BTW the ironclad is really SMALL ...

[Timmy C]

may be something else but can't remember right now.

The gun barrels!

[Georgi Grigorov]

In 1/700??? Well everyone who want them can use syringe needle ( it sound this way if i translate it directly) I will not supply them in the kit because being from Bulgaria (country famous manly with it's criminals, drug dialers included) it is possible that some officers on the custom may decide that I'm sending ready for use drug sets:)
Also i doubt that in this case the gun 's barrel go outside the casemate.
But for some ships that will follow we may do it, I have access to the factory that produce them and can buy some very thin pipes used for this purposes...eventually we can use them as mast too.

[Atma]

1/700 is the scale
There is funnel and boat as resin parts, and grilles over the vent shafts, gun port covers, railing, chain and anchor, davit and boat deck...may be something else but can't remember right now. May be when I finish the light cruiser's hull that I design right now will check.
BTW the ironclad is really SMALL ...

What light cruiser ?

[Georgi Grigorov]

Poor design but nice looking.
WW2 era, one of the ... hum lets say "not wining" sides. Actually I work on two such cruisers, different countries but the same side. Both was bad designs.
I want to test something, and then we will start with the nice ships with "HMS" in front (ships with HMAS and HMCS are also good).
But as I say these are only for testing some concepts, for now.

[Atma]

C class cruiser ! With 7 subclasses and WWI/WWII operations, those ships will be amazing in 1/700.

[Georgi Grigorov]

If you mean British C class cruiser, not, they will follow later when I test what I want to test.
Also I say �poor design�, British ships are not such:)
Last night I finish the hull and tomorrow will send it for prototyping together with current series of subs (3 pieces one nuclear and 2 diesels, all Europeans).