I have completed the Charles F. Adams, Dragon Premium Edition, 1 / 700.
I've done in less time than I would need. It has several errors, but I think his general appearance is good.
Thanks to Mr. Carl Musselman for their information on paint scheme.
Characteristics and materials.
Photoechted
Lion Roar - USN Modern Radar I
Lion Roar - USN Railing
Guns: hypodermic needles 0.5 mm and 0.8 mm.
Axes of the propellers: Rebuilt by breakage, hypodermic needle of 0.8 mm.
Front Mast: Rebuilt completely with 0.7 mm hypodermic waters. and 0.8 mm.
Several supports with plastic rods.
The name of the boat is made ??in a small piece of wood with laser writing.
Some pictures of completion and final appearance.
Greetings.
1/700 - Dragon Models - Charles F. Adams
Moderators: MartinJQuinn, JIM BAUMANN, Jon, Dan K
- Kometa
- Posts: 370
- Joined: Sun Jul 11, 2010 6:52 am
- Location: Galicia (Spain)
1/700 - Dragon Models - Charles F. Adams
On workbench:
Uss Fletcher DDG-992 1/350
Uss Lexington 1/700
Russian SSBN Borei Class - K-550 Alexander Nevskiy
and more, more, more
My Galery:
http://www.modelshipgallery.com/gallery ... index.html
Instagram: Tamboshipsmodels
Uss Fletcher DDG-992 1/350
Uss Lexington 1/700
Russian SSBN Borei Class - K-550 Alexander Nevskiy
and more, more, more
My Galery:
http://www.modelshipgallery.com/gallery ... index.html
Instagram: Tamboshipsmodels
- Gordon Bjorklund
- Posts: 960
- Joined: Sat Feb 26, 2005 7:32 pm
- Location: Seattle, Wa.
Re: 1/700 - Dragon Models - Charles F. Adams
Another great looking build!!
Gordon
"Then there was one patched-up carrier...."
Vice Admiral Thomas A. Kinkaid
"Then there was one patched-up carrier...."
Vice Admiral Thomas A. Kinkaid
- Sean Hert
- Posts: 1404
- Joined: Sat Jan 08, 2005 11:17 pm
- Location: Columbus, OH
- Contact:
-
G. Shoda
Re: 1/700 - Dragon Models - Charles F. Adams
Very nice looking model. Looks so small in your hand. As a kid, I built the old Revell kit, which was much bigger but still nice (the kit, not my model work).
- Robboxxx
- Posts: 27
- Joined: Sat Mar 28, 2009 4:38 am
- Location: Maastricht, The Netherlands
- Kometa
- Posts: 370
- Joined: Sun Jul 11, 2010 6:52 am
- Location: Galicia (Spain)
Re: 1/700 - Dragon Models - Charles F. Adams
After each ship there is always a little story.
From 16/01/1968 to 25/01/1968, when I was ten years, the ship Charles F. Adams visited the port of Marin (Spain) where is the Naval Academy of the Spanish Navy. It had been seven years since the entry into service of the CFA and was assigned to the Sixth Fleet and had made trips to other European ports. During their stay, students from the Naval Academy and officers could check the level of technology that incorporated the Adams.
At that time my father was a councilor in the City and was invited to a launch given by the Captain of the ship as a courtesy to the city.
When I "Modelwarships" I liked the content and encouraged me to re-build models and was a surprise to find the Charles F. Adams in the navy yard of Philadelphia.
In the last Christmas I thought it would be a good gift for my father to build the Charles F. Adams and give this surprise. Was building for a month, maybe a little rushed, but managed to finish and submit it with a little information about Charles F. Adams. When he saw the boat, immediately recalled, and of course like to have that model.
Shortly after, I was surprised that he had located two stories of Charles F. Adams in the Spanish newspaper ABC, about the ship's stay.
Here I leave the links to these two news I try to translate:
ABC � 18/01/1968 - 44 years ago today !!!!!!.
Bottom right.
http://hemeroteca.abc.es/nav/Navigate.e ... 8/039.html
�Seriously injured to overturn the jeep carrying the American sailor Philip James Paul. The accident happened on the road to Pontevedra Marin. The injured crew member of the American destruct "Charles F. Adams" anchored in Marin.�
This is not good news, but I think the wounded recovered. In the website of the Association Charles F. Adams include its address.
ABC-24/01/1968
In the middle.
http://hemeroteca.abc.es/nav/Navigate.e ... 4/042.html
�He sailed from this port the American destroyer "Charles F. Adams," which from the past 15 days was in this port visit of courtesy. It has been visited by gentlemen students of the Naval Academy to learn the art facilities of the ship, among which detection systems and radar control surface targets at sea or in the air, so as "ASROC" craft submarines, artillery and surface electronic system that allows the commander of the ship is controlled directly from the bridge all the weapons and devices of attack, defense, and navigation.�
Perhaps with a little more time could have built in 1 / 350 this boat. When I was building I have discovered the technology of this vessel and its important role in the USN.
This is our little story of Charles F. Adams.
Greetings and thank you very much for your kind remarks.
Excuse me for the traslation.
From 16/01/1968 to 25/01/1968, when I was ten years, the ship Charles F. Adams visited the port of Marin (Spain) where is the Naval Academy of the Spanish Navy. It had been seven years since the entry into service of the CFA and was assigned to the Sixth Fleet and had made trips to other European ports. During their stay, students from the Naval Academy and officers could check the level of technology that incorporated the Adams.
At that time my father was a councilor in the City and was invited to a launch given by the Captain of the ship as a courtesy to the city.
When I "Modelwarships" I liked the content and encouraged me to re-build models and was a surprise to find the Charles F. Adams in the navy yard of Philadelphia.
In the last Christmas I thought it would be a good gift for my father to build the Charles F. Adams and give this surprise. Was building for a month, maybe a little rushed, but managed to finish and submit it with a little information about Charles F. Adams. When he saw the boat, immediately recalled, and of course like to have that model.
Shortly after, I was surprised that he had located two stories of Charles F. Adams in the Spanish newspaper ABC, about the ship's stay.
Here I leave the links to these two news I try to translate:
ABC � 18/01/1968 - 44 years ago today !!!!!!.
Bottom right.
http://hemeroteca.abc.es/nav/Navigate.e ... 8/039.html
�Seriously injured to overturn the jeep carrying the American sailor Philip James Paul. The accident happened on the road to Pontevedra Marin. The injured crew member of the American destruct "Charles F. Adams" anchored in Marin.�
This is not good news, but I think the wounded recovered. In the website of the Association Charles F. Adams include its address.
ABC-24/01/1968
In the middle.
http://hemeroteca.abc.es/nav/Navigate.e ... 4/042.html
�He sailed from this port the American destroyer "Charles F. Adams," which from the past 15 days was in this port visit of courtesy. It has been visited by gentlemen students of the Naval Academy to learn the art facilities of the ship, among which detection systems and radar control surface targets at sea or in the air, so as "ASROC" craft submarines, artillery and surface electronic system that allows the commander of the ship is controlled directly from the bridge all the weapons and devices of attack, defense, and navigation.�
Perhaps with a little more time could have built in 1 / 350 this boat. When I was building I have discovered the technology of this vessel and its important role in the USN.
This is our little story of Charles F. Adams.
Greetings and thank you very much for your kind remarks.
Excuse me for the traslation.
On workbench:
Uss Fletcher DDG-992 1/350
Uss Lexington 1/700
Russian SSBN Borei Class - K-550 Alexander Nevskiy
and more, more, more
My Galery:
http://www.modelshipgallery.com/gallery ... index.html
Instagram: Tamboshipsmodels
Uss Fletcher DDG-992 1/350
Uss Lexington 1/700
Russian SSBN Borei Class - K-550 Alexander Nevskiy
and more, more, more
My Galery:
http://www.modelshipgallery.com/gallery ... index.html
Instagram: Tamboshipsmodels