Pontosmodel 1/350 Russian Navy Sevastopol Detail Up Set

[Pontosmodel]

The torpedo net booms look great! That's the first time I have seen anyone make those with attachments, great job sir!

We had tried these net booms at the Dreadnought.
viewtopic.php?f=16&t=85905

Thank you
Kim

[Pontosmodel]

Dear Kim, are you planning to include flagstocks and proper scale nautical chain in the kit?

I don't know what Flag Stock means.
You can refer viewtopic.php?f=16&t=85905 as this set will have similar contents as Dreadnought.

Thank you
Kim

[mermaid]

Dear Kim, as flagstocks I ment those short masts at the bow and stern ends.
Thanks for the contents reference.
I hope you'll make a proper nautical chains someday as no one is making them yet.

[Pontosmodel]

Dear Kim, as flagstocks I ment those short masts at the bow and stern ends.
Thanks for the contents reference.
I hope you'll make a proper nautical chains someday as no one is making them yet.

Jack Staff and Ensign Staff are different shapes on every class, but all our detail up sets have these.
Though our black chain may be seemed as general, you can prolong with your two hand strength. I recommend 10% be longer for the best effect.

Thank you
Kim

[mermaid]

Thanks for advice with the chain, Kim!
Because of the overall thickness the present look of the deck has a reminiscence of a stack of timber logs, and therefore despite the great effort with metal seams still lacks the desired realism.
Is it possible to make planking of the desk with a bit more narrow planks and thinner contour lines?
If not, then hopefully the deck will be sold separately from the lovely brass bollards you`ve made.
When you start taking orders for the kit?
Please reserve one set for me.

[Pontosmodel]

Thanks for advice with the chain, Kim!
Because of the overall thickness the present look of the deck has a reminiscence of a stack of timber logs, and therefore despite the great effort with metal seams still lacks the desired realism.
Is it possible to make planking of the desk with a bit more narrow planks and thinner contour lines?
If not, then hopefully the deck will be sold separately from the lovely brass bollards you`ve made.
When you start taking orders for the kit?
Please reserve one set for me.

These metal seams are test PE sample just for the test fitting.
At mass producing we will use 40% thinner than these brass material thickness.
So with this thinner thicness you may not notice the thickness from the wood.

Almost done and now we also finished the design of Torpedo nets.
I think you can see the final by this month.

Thank you
Kim

[Dan Banks]

Is this set out yet? Thanks Dan

[mermaid]

Dear Kim, is there a 1/200 Bismark in your plans?

[Pontosmodel]

Dear Kim, is there a 1/200 Bismark in your plans?

Yep our major simumtaneous project with 1/350 Bismarck in this year.
All and new our Design concepts and technical parts will be resoled in this Bismarck project.

Thank you
Kim

[Pontosmodel]

Is this set out yet? Thanks Dan

Sorry for the delay.
Now tuning the final.
Coming soon.



Kim

[Dan Banks]

Please put me down for 1 set, with wood deck. Thanks Dan.

[Pontosmodel]

Please put me down for 1 set, with wood deck. Thanks Dan.

Yep I will reserve one set for you.
Wooden deck is included in this set as basic option.

Thank you
Kim

[cmarchand]

Any projected release date? And would this be available without wood deck?

[Pontosmodel]

Any projected release date? And would this be available without wood deck?

1st November is the releasing date and the estimated retail price is 80.00USD.

This set will include Anti Torpedonet as Dreadnought.
And the last choice we decided as all vents(over 70EA) to be included as turned brass parts.
These make this set cannot be applied properly without woodendeck .
So our woodendeck is included as one of basic part.

Thank you
Kim

[Rurik_II]

Kim, this is really good news!

[litvin70]

Hi Kim!
Set not ready yet?

[tmkonst]

Hi Kim.
Any news about the set ?

[Pontosmodel]

Sorry somedays havebeen delayed.
NOw finalizing the design and starting instruction manual editing.




We will start to ship at 6th November.
The first lot amounts are sold out to Soga Miniature fully.
So for the Russian modelers, It is better to get at this shop.

Better than our Dreadnought set.

Thank you
Kim

[Rurik_II]

My congratulations to Kim. It has long been waiting for!

[Pontosmodel]

My congratulations to Kim. It has long been waiting for!

Yep it has been long time.
But you will never regret to wait this long time.
Thank you
Kim