My first resin 1/144th model

Moderators: MartinJQuinn, JIM BAUMANN, Jon, Dan K

RogerP
Posts: 29
Joined: Wed Jul 27, 2005 7:23 pm
Location: Bendigo, Australia

My first resin 1/144th model

Post by RogerP »

Hello Everyone from 'way downunder',

Well after quite some time I have finally completed the first model (actually she wanted three) for a customer in Western Australian. The 'little ship' in question being the RN's Fairmile B class ML 357 which my customer's late father was the radio telegraphist during 1944-5. ML 357 was part of the 42nd ML Flotilla, operating in the Aegean and Adriatic Seas quite often doing clandestine work with the LRDG and Greek Sacred Sqn as well as some runs to and from occupied Crete.
ML 357-20a.jpg
Roger Pearson.
Bendigo, Australia.

"Roger's Little Ships".
Modelling and researching 'Allied Light Coastal Forces 1914-45'.
User avatar
Bill Clarke
Posts: 1665
Joined: Wed Jan 26, 2005 8:40 pm
Location: Wagga Wagga NSW

Re: My first resin 1/144th model

Post by Bill Clarke »

Roger,

Nice job mate. :thumbs_up_1:
User avatar
Gordon Bjorklund
Posts: 960
Joined: Sat Feb 26, 2005 7:32 pm
Location: Seattle, Wa.

Re: My first resin 1/144th model

Post by Gordon Bjorklund »

I can only agree with Bill. You have a great looking model there.
Gordon


"Then there was one patched-up carrier...."
Vice Admiral Thomas A. Kinkaid
User avatar
Mike Reading
Posts: 197
Joined: Fri Oct 17, 2008 11:47 am
Location: East Sussex, England

Re: My first resin 1/144th model

Post by Mike Reading »

A good looking model and well done.

Where I live in England, a few miles along the coast a "B" is being restored to its former glory. I've attached a photo of her in the quite early stages - in other words how she arrived.

Mike
Attachments
pictures 058.jpg
User avatar
LE BOSCO
Posts: 2261
Joined: Thu Aug 27, 2009 11:05 am
Location: Paris France

Re: My first resin 1/144th model

Post by LE BOSCO »

Hello Roger

nice model :thumbs_up_1: I like ,for our pleasure , have you others pics??
MIke ,I'll spend some vacation days in the Essex (Leigh-on-Sea)in MP ,can you tell me where is this ML?
thank you in advance
cheers
Nicolas
RogerP
Posts: 29
Joined: Wed Jul 27, 2005 7:23 pm
Location: Bendigo, Australia

Re: My first resin 1/144th model

Post by RogerP »

Hello Mike and Nicolas,

Yes Mike I know of 'Western Lady IV' which I believe is being restored back to it's former life as RML 526, one of the rescue ML's. They have a website ---
fairmileb-rml526.com but it appears none of the links work.........................yet, very much a 'work in progress' I suspect.

Nicolas, I'm sorry I don't know what you mean by "have you others pics??" do you mean other photo's of this model OR photo's of the other coastal forces models I'm working on?
Roger Pearson.
Bendigo, Australia.

"Roger's Little Ships".
Modelling and researching 'Allied Light Coastal Forces 1914-45'.
User avatar
LE BOSCO
Posts: 2261
Joined: Thu Aug 27, 2009 11:05 am
Location: Paris France

Re: My first resin 1/144th model

Post by LE BOSCO »

RogerP wrote:...Nicolas, I'm sorry I don't know what you mean by "have you others pics??" do you mean other photo's of this model OR photo's of the other coastal forces models I'm working on?

Hello Roger

yes ! others photo's of this model ,under diff�rent angles :thumbs_up_1:
where I can see your work in court on other coastal forces models?
again congrats for the nice model :thumbs_up_1:
cheers
Nicolas
RogerP
Posts: 29
Joined: Wed Jul 27, 2005 7:23 pm
Location: Bendigo, Australia

Re: My first resin 1/144th model

Post by RogerP »

Nicolas,

I've sent you a 'pm' with my e-mail address so I can send you some other photo's. I don't have a website......yet and the other models I'm working on are only around half finished, but I can provide the following list:

HDML 1285 -- this is the only one actually finished.
ML 825 -- an RAN Fairmile B just awaiting crew figures.
MTB 234 -- a Vosper MTB.
ML 103 -- a Fairmile A class minelayer.
MGB 314 -- a Fairmile C class and HQ ship at St Nazaire.
ML 357 -- this one I started for my customer in WA before deciding to do them in resin so I'll keep this one for myself.
ML 531 -- this one is scratchbuilt in card and is a WW1 ML.
PT 103 -- the first US Elco 80' PT boat.
SC 648 -- a US Sub Chaser.
ML 306 -- another 'B', this one id from St Nazaire (Op Chariot) and
HDML 1321 -- an RAN Special ops boat involved with the coastwatchers and Z Special commando's.

All these are 1/144th scale and are all card models except ML 306 which will be a resin one for myself.

I'm also 'tinkering' with quite a number of other craft, both from existing card models and scratchbuilt including post WW2 craft leading up to the present day.
Roger Pearson.
Bendigo, Australia.

"Roger's Little Ships".
Modelling and researching 'Allied Light Coastal Forces 1914-45'.
User avatar
Mike Reading
Posts: 197
Joined: Fri Oct 17, 2008 11:47 am
Location: East Sussex, England

Re: My first resin 1/144th model

Post by Mike Reading »

Hi Guys

The B that is being restored is at Rye. That's in East Sussex. As you drive along the main south coast road it goes through Rye and passes by where this vessel is moored. My travels took me through today. So I've attached photos showing the current progress.
Mike
Attachments
pictures 008.jpg
pictures 007.jpg
Post Reply

Return to “Completed Models”