T3-S2-A1 Tanker Scratchbuild in 1/96

[Richard J OMalley]

Here is a update from Bob



This is the new hull made from the second mold .The shaft tubes and rudder post are installed in all new T3 hulls .

[Capit�o Norbert]

hi Richard the hull is fantastic.
good to see the engines being installed.
some work on superestructure?

[Richard J OMalley]

Hi Norbert
Thanks for looking in .Charles Huet at CNC Models is working on a superstructure kit for the T3 .

[Capit�o Norbert]

Hi Norbert
Thanks for looking in .Charles Huet at CNC Models is working on a superstructure kit for the T3 .

i will anxiously waiting for

[Dave Wooley]

Hi Richard , Question the electic motors what type ? At one time I would fit only Pittman 9.2v , excellent motors , low drain with plenty of torque but the availability declined and the supply just vanished . There seems to be a rising trend at present for using brushless motors , they are good but expensive .
Dave Wooley

[Richard J OMalley]

Hi Dave
The motors that Bob has laid out on page two of this build are Astro Marine Super Ferrite 40 geared marine # 6340G
http://www.astroflight.com/index.php?ma ... fpsaimgg2g

but they don't look the same as the ones he installed in the hull .I will drop him a line and find out .

[Richard J OMalley]

Dave
The motors Bob used are Dumas 12v .The other ones take to much juice .Here are some more photo's from Bob .

[Richard J OMalley]

Another update from Bob .Too her out on a trial run .

[Capit�o Norbert]

nice view

[Richard J OMalley]

Thanks Norbert
Here are some more

[Richard J OMalley]

Hi All
Here is the new T3 master, four piece mold and the first hull made
.

[Paul Salomone]

Hello Richard,

Wow, you are quite a busy man. The hull is fantastic.

Cheers.

Paul.

[russclark]

very nice richard,all the sweat and hard work paid off

[Capit�o Norbert]

perfect

[Richard J OMalley]

Bob has just received the boats he will need for his tanker .

http://i136.photobucket.com/albums/q186 ... s20001.jpg

[JEno]

Folks,
Please use extreme care when having any dealings with Richard O'Malley.
I commissioned a hull from him in NOV 2011 and while he claims to have completed it, demanded the second half of the commission fee,(and received it), he is refusing to ship the hull.
I have saved every communication between Mr. O'Malley and myself and could blanket the board with them, anyone wishing copies please contact me.
In the meantime, I have filed criminal complaints against this indiviual and am pursuing further actions.
BUYER BEWARE.

Jonathan Eno

[Haratio Fales]

I am sorry to hear of your complications and missgivings about Richard, J. He can be a quite busy man and Im sure its just a bad misunderstanding between the 2 of you, and I hope that it can be sorted out. Richard is an artisan of model ship building and I have seen how much effort and time he dedicates to that end, let alone research, mathematical scaling and other things that can hold up projects.

I myself have a main project that is at a standstill for reasons that I won't go into here. Several side projects, and I have people who want me to stop and make them stuff, so I have to learn when and where to say no otherwise nothing gets done and I would have a garage full of 1000 things that are partial complete and no one is happy. Richard is probably just overtaxed and I'm sure he would be happy to finish/fix your project, unless there are extinuating circumstances. That being said, I hope I haven't put a Rope around your neck Richard due to the fact that I'm not privy to the full story here. I have been folowing Your projects with great interest just as I do Paul Salomone's and a few others, and as I have seen you guys follow mine.

I do wish the RC world would get away from 1/96-1/100 scale as I personally hate those scales, however this is like arguing if steaks or pork chops are better. I'm lazy so You know that I like the 1/72 because I don't want to scratch build the airplanes (which I could). anyways keep on keeping on and love Your work. Smooth sailing as always. Haratio.

[Richard J OMalley]

Thank you Haratio for your support .If you look at WMU you can see my reply on this matter .
Keep up the good work !
Richard

[DrPR]

Richard,

What is WMU and where can we find it?

Phil

[HvyCgn9]

he means the site known as 'Warship Models Underway' also known as WMU......

Bruce