At 'Em Arizona Fans!

Battleships and Battlecruisers of all nations and eras.
BB and BC.

Moderators: BB62vet, MartinJQuinn, Timmy C, Gernot, Olaf Held, Dan K, HMAS, ModelMonkey

Post Reply
User avatar
Timmy C
Posts: 12460
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: At 'Em Arizona Fans!

Post by Timmy C »

Great find Matt! Thanks for sharing that!
De quoi s'agit-il?
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

That's the new OPA system NARA's been working on phasing in. It's replacing ARC, which was limited in many ways, one of which being you couldn't link to results. I'm glad that's changed!
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
User avatar
nzmatt
Posts: 102
Joined: Thu May 26, 2005 5:40 am
Location: brisbane australia

Re: At 'Em Arizona Fans!

Post by nzmatt »

no problem..

i wasn't sure how its like in America for archives...but the plans seem old but good..

i am going to find out what they have on the uss midway as built..

glad the link helps!

cheers matt

p.s the uss George Washington is in Brisbane today!

http://www.flickr.com/photos/shebalso/s ... 387869605/
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

The archives is working to put records online, but they have so much that they're not even going to scratch the surface in our lifetime unless their budget is tripled for that express purpose, or something similar. The BOGP is a decent quick reference, but is nothing like the shipyard plans. I've gone through a couple of sets at NARA II where they're held and you're talking about 20-30 rolls of microfilm per capital ship, and many multiple sheets up to 18 feet long if on paper / canvas. I looked into Arizona and her plans weren't turned over, but there is a set for the BB-38 class. It's 36 rolls of microfilm, with no index, so you just have to start with the first one and go through them all to find anything. There can be hundreds of individual drawings on each roll, and after a while you can get a bit dizzy from watching all of the side scrolling....
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
User avatar
nzmatt
Posts: 102
Joined: Thu May 26, 2005 5:40 am
Location: brisbane australia

Re: At 'Em Arizona Fans!

Post by nzmatt »

i bet...

i knew a friend of mine who use to deal with plans back home in nz..very long and thousands of them!

and i have a few here as well of ships..

yes the plans are good for reference.. bb38! maybe as built!! nara might have..

i bet the shipyard plans are very detailed!
User avatar
denstore
Posts: 431
Joined: Thu Aug 07, 2008 10:24 am

Re: At 'Em Arizona Fans!

Post by denstore »

Tracy White wrote: Top half, but know that the split is NOT on the waterline and is about ten scale feet below that.
How much is that on the kit? About 8mm?
/Magnus
User avatar
Timmy C
Posts: 12460
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: At 'Em Arizona Fans!

Post by Timmy C »

8.6ish, yeah. 10ft ~=300cm , 300cm/350 ~= 0.857cm ~= 8.6mm.
De quoi s'agit-il?
kb466
Posts: 101
Joined: Thu Nov 11, 2010 1:54 pm

Re: At 'Em Arizona Fans!

Post by kb466 »

If it is 10 feet, that would be 3/5 or .60 of an inch in 1/200 scale.
Bill M.
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

I think the 200th Arizona is split at a different (more accurate) point, but I haven't measured it for a long time to be sure. I'll try and do a comparison this weekend.
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
Andrew D BB39 Sec
Posts: 89
Joined: Thu Dec 27, 2012 1:13 am

Re: At 'Em Arizona Fans!

Post by Andrew D BB39 Sec »

Just received belated news that USS Arizona survivor Ed Wentzlaff passed away on 10 September in Minnesota. He was the last survivor from the Arizona's aviation division. He was quite a guy.

11 now remain.
"If at first you don't succeed, switch to power tools." --Red Green
Jeff Sharp
Posts: 1056
Joined: Mon Jan 07, 2008 10:15 pm

Re: At 'Em Arizona Fans!

Post by Jeff Sharp »

Thought this may be of interest to some of you. This is a pic of the wrecked Arizona model which is at the Pearl Harbor Museum. For years I've been looking for a good view of the quarter deck gun tubs. This is the view I have been seeking. Notice the director tub next to the gun tub. If accurate, which I believe it is, then the 1/200 Trumpeter version of this director tub is SLIGHTLY too flat.
Image
User avatar
Jon C Ryckert
Posts: 586
Joined: Sat Jun 06, 2009 12:40 pm

Re: At 'Em Arizona Fans!

Post by Jon C Ryckert »

Jeff,
Here is a pic I took back in 2004. The director appears to be just a tad bit taller than the gun tub and it also appears to have had a lid/cover over the top. I'll check later to see if I have any more pics of that area. One thing that I seem to recall as it was hard to make out in person ( I'm sure I saw this) and I cant verify with the pic that I posted, is that the floor of the tub had a non slip pattern similar to what the USS Yorktown had in it's 1.1 aa gun tubs. I'll post a pic of the Yorktown tub later if I can find it on-line or I'll scan it from one of my books.
Attachments
Arizona gun tub director.jpg
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

There was no tub installed; it was merely a circular platform on top of a post. If you look at this photo you can see that the gun tub has a shadow but the director platform does not - it's not a tub. I have not found drawings for it yet, but since it was for the Mk 49 Gun Director and Pennsylvania had them for a period, we can use her as a best guess for now. Check out Item #5 in this picture - the canvas-covered R2D2 is sitting on top of a platform the correct size as described in textual documents. So I'm pretty confident that Arizona's were at least 90% similar (ladders?).
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
User avatar
GMG4RWF
Posts: 247
Joined: Thu Apr 25, 2013 12:01 pm
Location: Fort Worth, Texas

Re: At 'Em Arizona Fans!

Post by GMG4RWF »

Tracy White wrote:There was no tub installed; it was merely a circular platform on top of a post. If you look at this photo you can see that the gun tub has a shadow but the director platform does not - it's not a tub. I have not found drawings for it yet, but since it was for the Mk 49 Gun Director and Pennsylvania had them for a period, we can use her as a best guess for now. Check out Item #5 in this picture - the canvas-covered R2D2 is sitting on top of a platform the correct size as described in textual documents. So I'm pretty confident that Arizona's were at least 90% similar (ladders?).
that's '43 post reconstruction (note the Mk38's) - Arizona never had a Mk49 - but the director may have been on a flat platform with guardrails (often depicted in model form looking like a "tub") but I would need to check.
User avatar
Jon C Ryckert
Posts: 586
Joined: Sat Jun 06, 2009 12:40 pm

Re: At 'Em Arizona Fans!

Post by Jon C Ryckert »

Thanks for the clarification Tracy.
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

GMG4RWF wrote:that's '43 post reconstruction (note the Mk38's) - Arizona never had a Mk49 - but the director may have been on a flat platform with guardrails (often depicted in model form looking like a "tub") but I would need to check.
No kidding - they weren't ready in 1941, but the Navy was preparing for them. They basically said to create a platform of X diameter (I've got the document at home and can't remember the exact dimensions. There were no guardrails. You can see the same sized platform on the navigation bridge level platform lacking guardrails. Since they weren't doing anything with these platforms yet, there may not have even been ladders up (which is why I'm only sure they're 90% the same). Different time period, but for the same director.
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
Jeff Sharp
Posts: 1056
Joined: Mon Jan 07, 2008 10:15 pm

Re: At 'Em Arizona Fans!

Post by Jeff Sharp »

Tracy White wrote:There was no tub installed; it was merely a circular platform on top of a post.
Thanks Tracy. Do you think the post is as skinny as the one labeled as #5 that you referenced?
Tracy White
Posts: 10627
Joined: Mon Jan 10, 2005 11:02 am
Location: EG48
Contact:

Re: At 'Em Arizona Fans!

Post by Tracy White »

I have no reason to believe otherwise. It does "feel" skinny to me, but given the height and thicknesses of most masts, I think it was adequate. I have wondered if the ladders on Pennsy's installation were somewhat of a structural reinforcement in addition to access, though.
Tracy White -Researcher@Large

"Let the evidence guide the research. Do not have a preconceived agenda which will only distort the result."
-Barbara Tuchman
User avatar
MuseumGeek
Posts: 25
Joined: Fri Jan 17, 2014 12:11 am
Location: Colorful Colorado

Radio call sign

Post by MuseumGeek »

Does anyone know the radio call sign for the Arizona? For example, Pennsylvania was November, Alpha, Delta, X-ray.

Thanks for any leads!

Matthew
User avatar
OS1880
Posts: 230
Joined: Tue Jan 29, 2008 8:03 pm
Location: Ellijay Georgia

Re: At 'Em Arizona Fans!

Post by OS1880 »

November Alfa Bravo Whiskey
Fred Luhrs

]Image
Post Reply

Return to “Battleships”