The Ship Model Forum

Anyone interested in a group build for the summer? I'm thinking going from April(Now) to Sept. 30th. That should be enough time I think. If you have one started and partially completed already that is okay.

Any navy, any era, any scale, it must have been classified as a cruiser of some type in its history, ships converted too or from cruisers fit this category and are accepted as well.

Participants: If you want, please create a WIP thread for your build in the Picture Post area and I'll add the link here. Keep a record and photos of your progress there, post a photo of the finished model in this thread when it is done.

Build List:

ajkochev-1/700 Tamiya IJN Yahagi http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=156237
JTninja-1/700 New Orleans Class
Goodwood-1/350 IJN Mikuma
Lyall-1/700 Trumpeter Prinz Eugen http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=156691
Bob Dedman-1/700 Louisville
Gordon Bjorklund-1/700 USS Arkansas
PeteM-1/700 Midship Models USS Cleveland
JevJanson-USS Indianapolis
PetrolGator-1889 USS Maine
sirpaul-Trumpeter Belfast and/or Tamiya Tone
taskforce48-1/350 Hasegawa IJN Yahagi http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=156582
Vlad-1/700 Trumpeter USS Vincennes CA-44
Ronald47-Trumpeter 1/700 Bismarck http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=156793

Im down. Still need to finish my Portland, then can start a 1/700 New Orleans class.

_________________
"Also we will never see a 1/350 late war Enterprise from Dragon due to a paralyzing fear of success...." - Heavy Melder

Lots of unfinished model ships + attention issues = A busy slipway where nothing gets done!

I have the Tamiya 1/350 Mikuma and could join in.

The hull is assembled (though not the 01 deck), and not much else has been done with it.

_________________
Sean Nash, ACG (aircraft camo gestapo)

On the ways:
1/200 Trumpeter HMS Nelson
1/700 Tamiya USS Yorktown CV-5

In the stash:
1/35 Italiari PT-109
1/35 Tamiya "Pibber" Patrol Boat
1/350 Trumpeter USS Yorktown CV-10

Will join in, Just ordered a trumpeter Prinz Eugen

_________________
Sailing:
HMS Illustrious 1:350

In the Shipyard:
HMS Repulse 1:350
HMS Prince of Wales 1:350
DKM Prinz Eugen 1:700

On the Design Table:
HMCS Winnipeg 1:72
HMCS Halifax 1:350

can I play, 1/700 Louisville, just finished it this month?

_________________
It's easier to beg foregiveness than it is to ask for permission.

I'm in. I have been thinking about building another nuclear powered ship to go with the Long Beach. I've ordered Dragon's 1/700 USS Arkansas CGN41 and Flighthawks' pe set for the Virginia from Free Time. I'll get started when the order shows up at my door.

This morning I ordered a display case from Squadron to put this build in. Now to wait until everything gets here.

_________________
Gordon


"Then there was one patched-up carrier...."
Vice Admiral Thomas A. Kinkaid

I'd like to take a crack as well. I've got a partially begun 1/700 Midship Models USS Cleveland that I need to get going on again. Basically the hull is painted and construction has begun on the superstructure. I am out of town for the weekend but I can post a picture for you to determine if it is in an acceptable state for entry when I get home next week..

_________________
On the ways:
1/350 AFV Club LST

I'm in. I really need to get to work on my USS Indianapolis. This will give me incentive to work on it.

_________________
Greetings from Montana!

Ryon Olson

...is USS Maine technically a cruiser? I had the build going well until my dog decided it was a comfortable thing to lay down on while I was moving. I need a reason to finish her.

_________________
- Chris

1/700 Saratoga w/Pontos (Needs paint)
1/700 Potato w/Kurama (On hold)
1/700 Murdertorpedoboat Ooi

According to Wikipedia the 1889 USS Maine was a cruiser, the others...... were battleships.

Fantastic. If I can find the bits I need to repair her, count me in.

_________________
- Chris

1/700 Saratoga w/Pontos (Needs paint)
1/700 Potato w/Kurama (On hold)
1/700 Murdertorpedoboat Ooi

sorry guys, no WIP photos of "da 'Ville", she took a road trip to the NOVA contest this past weekend with her sisters (and without me). I need to take a look at her when I get her back before I start posting photos of her.

_________________
It's easier to beg foregiveness than it is to ask for permission.

I'm in. I will be Doing Trumpy's Belfast. All I have done so far is waterlines the hull. Or I could start my second Tamiya Tone.

_________________
On the Bench
1/350 Independence
1/350 Dunkerque
1/350 Shimakaze
1/350 Sharnhorst Dragon
1/350 Belfast

Here is a photo of where I am at with this build. The hull and superstructure are painted and I've done some PE work, completing the A/C crane and catapults:

_________________
On the ways:
1/350 AFV Club LST

Ok, I'll bite. I've had Hasegawa's Yahagi lurking in the stash for a few years and just recently acquired two PE sets for it. Here is where she is at tonight.



I will start a WIP when get a little more progress. Tonight was just plan of attack and hull assembly.

Looking forward to seeing everyone else's builds,

Matt

_________________
In the yards right now:
USS Utah AG-16
On Hold
1/350 USS Portland CA-33 1942
1/350 Trumpeter Texas with a twist

I'm in as well

I have a Trumpeter kit that I'm trying to beat into an accurate USS Vincennes CA-44. Here's an earlier picture. Since this I've also cut up the platform just aft of No.2 turret and brought it down to the correct level. The camouflage is also about half done.

I'm not planning to start a dedicated Work in Progress thread but I'll post pictures in the Completed section when she's done. I also have IJN Chokai in the post.

Do battlecruisers count as "cruisers" for the purpose of this thread?

_________________
Vlad

It has cruiser in the name, should be good

_________________
"Also we will never see a 1/350 late war Enterprise from Dragon due to a paralyzing fear of success...." - Heavy Melder

Lots of unfinished model ships + attention issues = A busy slipway where nothing gets done!

Hello all, did I get everyone listed in the top post?

Also, if you've got a WOP thread send me the link in a PM or post it here and I'll add it to the top post.

I have finally gotten around to getting photos of the Indianapolis. I must admit, that ship has way too many fragile parts. Anyway, here are the photos:



Most of the superstructure is just sitting in place right now. They are about to be painted. Currently the only painted parts are the lower hull and part of the upper deck (Which is wrong for the year I am portraying the ship).

More will be posted soon.

_________________
Greetings from Montana!

Ryon Olson

Hey, got my Prinz Eugen today, unfortunately have to go away for work for a week. Will start it once i'm back.

_________________
Sailing:
HMS Illustrious 1:350

In the Shipyard:
HMS Repulse 1:350
HMS Prince of Wales 1:350
DKM Prinz Eugen 1:700

On the Design Table:
HMCS Winnipeg 1:72
HMCS Halifax 1:350