*Inj. molded plastic* Upcoming Ship Kit Releases

Main forum for general questions

Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot

Post Reply
pgollin
Posts: 444
Joined: Mon Jan 26, 2015 5:35 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by pgollin »

henk wrote:Any news on mirage hobby new 1/350 flower class ships?

Kind regards,

Henk




This page gives a view of the 2015 Mirage Hobby Catalogue ;

http://www.cybermodeler.com/catalog/mirage15.shtml

This shows that in addition to the 4 versions presently available they intend producing at least two more - HMS Burdock and USS "Sausy" (i.e. USS Saucy) ;

http://www.cybermodeler.com/catalog/pag ... 5_27.shtml

In addition there are various new Polish Torpedo Boats, and in 1/500th scale a modification to the existing kit into the Landing Ship Infantry ("Attack Transport") Batory ;

http://www.cybermodeler.com/catalog/pag ... 5_24.shtml

There is a nice piece on the latter here ;

http://wwiimodeller.co.nz/tag/mirage-ho ... july-1943/

Oh for that in 1/350th


.
User avatar
Quincy
Posts: 2220
Joined: Fri Apr 08, 2005 9:41 am
Location: Monson, MA.

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Quincy »

Caesar Ho wrote:Flyhawk will release chungking and penelope 1940


:thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :woo_hoo:





Bob Pink. :wave_1:
User avatar
PHILIPPE
Posts: 414
Joined: Tue Aug 31, 2010 8:13 am
Location: BRUSSELS, Belgium

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by PHILIPPE »

Timmy, if you allow, I think you should update the info on Zvezda Marat : it is released. I have started building mine
thanks
User avatar
taskforce48
Posts: 1614
Joined: Mon May 21, 2007 5:49 pm
Location: The beautiful PNW

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by taskforce48 »

Don't know if these have been seen or not, but this eBay listing has some built up shots of the new Kaga coming out.

http://www.ebay.com/itm/PRESALE-1-350-J ... 3f4d0b7732

I have no affiliation with this auction, just wanted to share the images.

Matt
User avatar
Steve
Posts: 782
Joined: Wed Jun 27, 2007 11:59 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Steve »

PHILIPPE wrote:Timmy, if you allow, I think you should update the info on Zvezda Marat : it is released. I have started building mine
thanks
I have received mine from PF here in the US. Very easily waterlined.
User avatar
Quaestor
Posts: 1324
Joined: Fri Jun 07, 2013 11:41 am
Location: CT, US of A

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Quaestor »

http://www.1999.co.jp/eng/list/918/0/1

Interesting that the new Fubuki from Yamashita, discussed above, has become the #1 seller (preorders) on Hobby Search.
Harold
Dan K
Posts: 9072
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Dan K »

Most interesting. A lot of knowledgeable IJN modelers and pent-up demand out there, it appears.
User avatar
PHILIPPE
Posts: 414
Joined: Tue Aug 31, 2010 8:13 am
Location: BRUSSELS, Belgium

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by PHILIPPE »

Trumpeter 1/700 USS West Virginia 1945 kit 05772 released at least in Europe. Available on ebay
User avatar
Cliffy B
Posts: 3125
Joined: Sun Feb 01, 2009 3:55 pm
Location: Hawaii
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Cliffy B »

Freetime and Squadron have it here in the states too. Was gonna get one but Freetime was sold out already :big_grin:
Drawing Board:
1/700 Whiff USS Leyte and escorts 1984
1/700 Whiff USN Modernized CAs 1984
1/700 Whiff ASW Showdown - FFs vs SSGN 1984

Slipway:
1/700 Whiff USN ASW Hunter Killer Group Dio 1984
SeanF
Posts: 798
Joined: Wed Nov 02, 2005 10:28 pm
Location: Downey, California

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by SeanF »

I've had my 1/700 WeeVee '45 and HMS Valiant for almost 2 weeks now. Got them at my local hobby shop. (yes... they do get them first sometimes!)

- Sean F.
User avatar
Joe Ellias
Posts: 242
Joined: Wed Jul 26, 2006 11:27 am
Location: Los Angeles, CA USA

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Joe Ellias »

Trumpeter announces 350 Kitty Hawk!
User avatar
Timmy C
Posts: 12463
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

Thanks for the heads up, Joe! Here's the link for it on Trumpy's site http://new2.trumpeter-china.com/index.p ... id=48&l=en
De quoi s'agit-il?
User avatar
Hugh Williams
Posts: 937
Joined: Sat Aug 19, 2006 2:11 pm
Location: Derbyshire, U.K.
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Hugh Williams »

Joe Ellias wrote:Trumpeter announces 350 Kitty Hawk!
Yep, sure does! WHat a turn up for the books.....or in middle earth, burn up for the tooks!

http://new2.trumpeter-china.com/index.p ... id=48&l=en

Scroll down to the bottom of update 2015-07.

What of Merit J F K? Not knowing too much about these ships, are they somewhat similar?

Typing the same at much the same time, Tim
1-350 wishes:
RN Cruisers/Destroyers (WW2)
USN Cruisers/Destroyers (WW2 + post war)
Caesar Ho
Posts: 93
Joined: Mon Nov 18, 2013 7:33 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Caesar Ho »

The mold of J F Kennedy may also developed by Trumpy
Attachments
CV-67.jpg
CV-67.jpg (10.67 KiB) Viewed 1814 times
User avatar
PaulC
Posts: 860
Joined: Sat Jun 14, 2008 9:27 am
Location: Kingston, Jamaica

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by PaulC »

Hugh Williams wrote:Not knowing too much about these ships, are they somewhat similar?
Hugh - I had to smile at that question! Way back in the 1980's I built a "Kitty Hawk" - couldn't remember the manufacturer or the scale, but it's decals were CV-63.

Fast forward to 2014, when a 20 year-old guy who got interested in my models and wanted to build one himself, went to the US and bought an Academy 1/800 Kitty Hawk. To cut a long story short, when I saw his model....Huh??? :scratch: It did NOT look like mine....though clearly the same scale.

A quick online investigation and THEN I discovered that my old model - boxed as Kitty Hawk - was actually JFK!! I pulled it out of the cupboard and did a bit of a renovation, used some aircraft my young friend donated from his real Kitty Hawk kit (there were enough to spare!) and re-christened it CV-67!

So...the two are significantly different - JFK being, externally, more akin to the later Nimitz class.

And just now, I've figured it out - my kit is by Monogram - so anyone with an old Monogram "Kitty Hawk" - it's not Kitty Hawk!
Hard a starboard.......Shoot!
User avatar
Hugh Williams
Posts: 937
Joined: Sat Aug 19, 2006 2:11 pm
Location: Derbyshire, U.K.
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Hugh Williams »

PaulC wrote:
Hugh Williams wrote:Not knowing too much about these ships, are they somewhat similar?
Hugh - I had to smile at that question! Way back in the 1980's I built a "Kitty Hawk" - couldn't remember the manufacturer or the scale, but it's decals were CV-63.

Fast forward to 2014, when a 20 year-old guy who got interested in my models and wanted to build one himself, went to the US and bought an Academy 1/800 Kitty Hawk. To cut a long story short, when I saw his model....Huh??? :scratch: It did NOT look like mine....though clearly the same scale.

A quick online investigation and THEN I discovered that my old model - boxed as Kitty Hawk - was actually JFK!! I pulled it out of the cupboard and did a bit of a renovation, used some aircraft my young friend donated from his real Kitty Hawk kit (there were enough to spare!) and re-christened it CV-67!

So...the two are significantly different - JFK being, externally, more akin to the later Nimitz class.

And just now, I've figured it out - my kit is by Monogram - so anyone with an old Monogram "Kitty Hawk" - it's not Kitty Hawk!
Hi Paul,

That was informative and instructive. Another thread has been opened up on this ship, to which I've posted an observation.:
viewtopic.php?f=2&t=159658

There are differences in design and build for both the ships, so we can't expect the same hulls to be used as JFK is 6 meters longer than Kitty Hawk, that's just for starters!

Cheers,

Hugh
1-350 wishes:
RN Cruisers/Destroyers (WW2)
USN Cruisers/Destroyers (WW2 + post war)
User avatar
potchip
Posts: 460
Joined: Wed Sep 17, 2008 3:36 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by potchip »

Trumpeter to release 1/350 Ark Royal, I suppose expected given they've announced 1/350 swordfish earlier with no other utility than to supply a WW2 RN carrier, and none more obvious than the Ark Royal. Hopefully a drastic improvement over the botched 1/700 attempt by Aoshima and shrink to 1/700 already!
Attachments
4a1a8b132e9922c7.jpg
Last edited by potchip on Fri Jun 05, 2015 6:25 pm, edited 1 time in total.
User avatar
Quaestor
Posts: 1324
Joined: Fri Jun 07, 2013 11:41 am
Location: CT, US of A

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Quaestor »

potchip wrote: ... the botched 1/700 attempt by Aoshima ...
:heh:

Speaking of which, Aoshima is releasing a 1939 Ark Royal:
http://www.1999.co.jp/eng/10330106

Really ringing the changes on that one; this is what, the third?
Harold
User avatar
Roberto
Posts: 412
Joined: Sun Jan 30, 2005 2:00 pm
Location: Bahamas, on a painful sabbatical from modeling

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Roberto »

potchip wrote:Trumpeter to release 1/350 Ark Royal, I suppose expected given they've announced 1/350 swordfish earlier with no other utility than to supply a WW2 RN carrier, and none more obvious than the Ark Royal. Hopefully a drastic improvement over the botched 1/700 attempt by Aoshima and shrink to 1/700 already!
Where did you read that?
Victoria Nobis Vita.
User avatar
Gernot
Posts: 651
Joined: Thu Sep 08, 2005 7:53 am
Location: Tokyo, Japan
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Gernot »

Hi,
I did not see any mention of the following yet:
  1. Aoshima IJN Ryujo (1942) in competition with Fujimi (release for August 2015 I think)
  2. Aoshima USS Balao class, in competition with Tamiya IIRC
  3. Fujimi IJN Hyuga as battleship-carrier hybrid - ETA 15th June 2015
  4. Fujimi IJN Nagato as at Leyte Gulf 1944 - ETA 19th June 2015
  5. Fujimi IJN Agano, Yahagi, Noshiro, Sakawa 4-cruiser set---finally the missing Sakawa!
Gernot Hassenpflug
Find out how it works, then functionality and limits
Post Reply

Return to “Main Forum”