IJN Nagara

Dan K · Post by **Dan K** » Fri Jun 05, 2015 7:09 pm

What is it that's "off"?

Ship Model Gallery · Post by **MartinJQuinn** » Fri Jun 05, 2015 7:11 pm

Frankly, I think she seems to be coming together quite nicely. Don't be so hard on yourself.

Angeliccypher · Post by **Angeliccypher** » Fri Jun 05, 2015 7:16 pm

The mess left behind by the tie down rods is one thing. I am not happy with the Tamiya paints. I am so used to Valejo and Life Color and am having a hard time working with these. It is also the aspect of every flaw you are painfully aware of..... But I will persevere:)

Angeliccypher · Post by **Angeliccypher** » Fri Jun 05, 2015 7:17 pm

Lol thanks Martin!

Dan K · Post by **Dan K** » Sat Jun 06, 2015 9:54 am

Funny, I love Tamiya paints. I guess it's what one's used to.

Sounds like the surface needs to sound down, I'm guessing. I do that all the time to clean up my "mistakes". Martin's right, persevere.

Angeliccypher · Post by **Angeliccypher** » Wed Jul 08, 2015 7:09 am

Back from vacation. A lot of work has gone into trying to finish the funnels. Here is one small snapshot of what I have done so far. More to come. Comments are always appreciated.

LE BOSCO · Post by **LE BOSCO** » Wed Jul 08, 2015 3:28 pm

very nice comeback Gabriel

cheers
nicolas

Dan K · Post by **Dan K** » Wed Jul 08, 2015 9:01 pm

Well put. A very nice funnel.

Ship Model Gallery · Post by **MartinJQuinn** » Wed Jul 08, 2015 9:41 pm

Very nice work!

Angeliccypher · Post by **Angeliccypher** » Sat Jul 11, 2015 1:19 pm

Thanks guys. I went to attach the first funnel and most of the PE rails popped off. So I finished attaching the funnel and now I am redoing all the PE. My goal is to get all three done this weekend with no more set backs.

Angeliccypher · Post by **Angeliccypher** » Sat Jul 11, 2015 7:05 pm

Here is the updates. I have attached all three funnels. The PE on top is complete. That took several hours to do and accounts for most of the time spent previous to the last photo. All PE on the first funnel is done.

Here is a blown up section of the second funnel. The Flyhawk PE messed something up in the instructions I think. The area circled in yellow (I am not sure if that is a set of vent tubes or something else) runs right over the red line area which is where I am supposed to be attaching a rail per the Flyhawk instructions. But it will not sit on top of it. If anyone has any insight as to if there was even a hand rail on that line or not I would appreciate it. If so I think I will have to make some "Kustom with a K" modifications to the PE. Below that is a picture of the Flyhawk instructions. The one in question is "Funnel B".

Dan K · Post by **Dan K** » Sun Jul 12, 2015 9:25 am

It may be Aoshima that has erred, not FlyHawk. Not sure what that shielding is for, or even why it's there. I'll check my references.

Angeliccypher · Post by **Angeliccypher** » Sun Jul 12, 2015 11:27 am

Thanks Dan

Dan K · Post by **Dan K** » Wed Jul 15, 2015 7:08 am

No luck on the references. It's impossible to say whether Aoshima covered this detail correctly and FlyHawk missed/ignored it, or that FlyHawk feels that Aoshima provided an extraneous, phantom, detail. Your choice.

Angeliccypher · Post by **Angeliccypher** » Wed Jul 15, 2015 8:43 am

Thanks Dan. I will likely use the plastic piece and simply cut the railing to fit. But I will look through other photos of the class to double-check.

Angeliccypher · Post by **Angeliccypher** » Sat Jul 25, 2015 5:50 pm

Here is the corrected funnel piece done as best as my skill will handle. The middle funnel is the one in question. The handrail that is second from the bottom runs right over where I had to patch the locator piece for the part that should not have been included. This was done with the funnel already attached, so it made it substantially harder for me.

Angeliccypher · Post by **Angeliccypher** » Sat Jul 25, 2015 5:52 pm

AND.....I finally got all the PE on the funnels. They are done (except for the funnel stays that will come a lot later).

Angeliccypher · Post by **Angeliccypher** » Sat Jul 25, 2015 5:54 pm

After the funnels, I tacked the walkway that connects the main deck areas above the fore torpedo tubes. I have the walkway and the four ladders attached.

Angeliccypher · Post by **Angeliccypher** » Sun Jul 26, 2015 3:54 pm

The structures that are aft the last funnel are installed. The three main batteries as well as the catapult are installed as well.

Time to finish the main mast....I am dreading this almost as much as I am the bridge area.....

Angeliccypher · Post by **Angeliccypher** » Mon Aug 03, 2015 10:37 pm

She is starting to come together.

: The remaining plastic parts ready to be painted

: Started to attach many of the above parts as started in on the bridge work as well

Comments are always welcome.

The Ship Model Forum

IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

96 hours

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

99 hours and much frustration later!!!!!!

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

Re: IJN Nagara

103 Hours

106 Hours

109 hours

111 hours

116 hours