Pontosmodel 1/350 HMS King George V Class Detail Up Sets

[daikatana]

Same question,bell is attached to part 380,but where it must go?

[Fletcher]

I know this post is old, but is there any chance of seeing the late KGV version? I want to build a 1945 version and would like to have a Pontos kit. If not, how much of the 1941 KGV kit could be used on a later fit?

Thanks,
Chris

[Seeadler290]

KGV Class detail pages is now under construction for updates.
For personal request, we can show the links. So please contact via email.

We've already started 1/350 Revell Bismarck from last year. But the main problem is new products that we had not thoughts have been released and have cut in this Bismarck (and more WWII Iowa class for Tamiya) schedule.
Anyway 1/350 Bismarck and Iowa follows after 1/200 series.
Hope we can pull down these two kits from our storage shelves as soon as possible.

Thank you
Kim

Hello Mr. Kim,
Yet another year has passed since this response which referenced a 2012 reply. What are the prospects for the Revell 1:350 Bismarck for the remainder of 2014?

[Pontosmodel]

I know this post is old, but is there any chance of seeing the late KGV version? I want to build a 1945 version and would like to have a Pontos kit. If not, how much of the 1941 KGV kit could be used on a later fit?

Thanks,
Chris

I think over 70% can be used for the later KGV with our detail set.
Thank you
Keumho Kim

[Pontosmodel]

Hello Mr. Kim,
Yet another year has passed since this response which referenced a 2012 reply. What are the prospects for the Revell 1:350 Bismarck for the remainder of 2014?

We try to release at this October
Thank you
Keumho Kim

[Seeadler290]

Hello Mr. Kim,
Yet another year has passed since this response which referenced a 2012 reply. What are the prospects for the Revell 1:350 Bismarck for the remainder of 2014?

We try to release at this October
Thank you
Keumho Kim

Most grateful for the update Mr Kim. Thank you.

Postscript: Purchased the 1/350 Revell Bismarck set and it exceeds expectations in every way. Thank you Mr. Kim for your commitment to quality!

[Hatfield Frank]

Re: The Ship's Bell location.
From two IWM photos of the bell, one of it being rung by a coxswain and another showing a Royal Marine Bugler with it in the background, it was hanging below a carley float just forward of an open scuttle. The only place on the main deck where they had these was along the outside of the Wardroom Flat, technically, part of the quarterdeck. The scuttle hinge is to the left and, as the hinges were at the forward edge, this means it was the "Port" or left side of the ship. So, my choice of position is just aft of, and above, the aft-most scuttle on the port side of the wardroom flat where it lies parallel with the side of the ship.

I think we can spot it on this still I captured from a cine-film taken from a boat passing KGV at anchor.

[Guest]

I've bought the PoW set. There was a problem with the brass barrels of the 2nd turret (the twin turret.) Whenever it is mounted in triple or quadruple there isn't a problem, but the twin mounting caused one barrel to stuck and couldn't go fully down while another one could. Is that happens with your build?

Regards.

[Pontosmodel]

I've bought the PoW set. There was a problem with the brass barrels of the 2nd turret (the twin turret.) Whenever it is mounted in triple or quadruple there isn't a problem, but the twin mounting caused one barrel to stuck and couldn't go fully down while another one could. Is that happens with your build?

Regards.

Can you show me some photos?
I cant understand with your post.
or contact me via email.
Thank you
Keumho Kim

[Guest]

Hi there,

Is there is any chance i might order replacement parts (2) for 1/350 Prince of Wales kit?

Thanks

[Pontosmodel]

If you emailed with derytele..., please email again with other account.
derytele ejected our email.
Thank you
Keumho Kim

[tmkonst]

Dear Mr. Kim
I would like to asking you if is possible to buy the Duke of York details set in SMW 2015 Telford on 7 November.
Could you please tell me if it is possible or not.
Thanks in advance
Symeon.

[HuntMaster82]

Can you make the PoW from the Force Z refit with the PoW update set or just as she was when she fought the Bismark???

[MartinJQuinn]

Can you make the PoW from the Force Z refit with the PoW update set or just as she was when she fought the Bismark???

Looking at the instructions, I believe you can make either version.

[HuntMaster82]

Can you make the PoW from the Force Z refit with the PoW update set or just as she was when she fought the Bismark???

Looking at the instructions, I believe you can make either version.

Oh ok awesome. I thought so, I thought it was only to make only the PoW when she fought the Bismarck