Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru (F)
Moderators: BB62vet, MartinJQuinn, JIM BAUMANN, Jon, Dan K
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Hmm, I meant to write Kenyo Maru, not Kokuyo Maru, in the previous post.
Kyokuto Maru�s bridge is now completed to the same degree as Kenyo Maru. I added the extra long accommodation ladders (from the GMM extra ladder set) that were placed on the bridge to both ships, and their davits as well. Plenty of mis-steps along the way, which is why so much time has passed since the last post. I even managed to remove and re-position the searchlight on Kyokuto Maru, as it had too much forward tilt to it.
While there are still some details to be added to the bridges, particularly in the open cockpit atop the bridge, nothing else can really be done until they are glued in place. Both bridges still have some Tamiya tape down on the deck within the confines of the open cockpit, to facilitate handling.
Kyokuto Maru�s bridge is now completed to the same degree as Kenyo Maru. I added the extra long accommodation ladders (from the GMM extra ladder set) that were placed on the bridge to both ships, and their davits as well. Plenty of mis-steps along the way, which is why so much time has passed since the last post. I even managed to remove and re-position the searchlight on Kyokuto Maru, as it had too much forward tilt to it.
While there are still some details to be added to the bridges, particularly in the open cockpit atop the bridge, nothing else can really be done until they are glued in place. Both bridges still have some Tamiya tape down on the deck within the confines of the open cockpit, to facilitate handling.
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
I also began the tiresome task of replacing the overscale railings at the stern, and under the boat deck, which meant ripping out the old railings and posts and replacing them; the posts, one by one. What a P-I-T-A. You can see the difference in sizing between the upper and lower railings to the right.
I also lost a top to one of the ventilators, and some railings and bracing under the funnel platform.
I also lost a top to one of the ventilators, and some railings and bracing under the funnel platform.
- Devin
- Posts: 2503
- Joined: Mon Jan 10, 2005 10:46 am
- Location: Hoboken, NJ
- Contact:
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Looking good, as always. Big difference in the two types of railings.
We like our history sanitized and theme-parked and self-congratulatory, not bloody and angry and unflattering. - Jonathan Yardley
-
Joe Simon
- Posts: 827
- Joined: Sat Jan 24, 2009 5:16 pm
- Location: Wisconsin
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Dan that looks awesome!
- MartinJQuinn
- Posts: 8582
- Joined: Tue Jan 11, 2005 1:40 pm
- Location: New Jersey
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Wow. Just wow.
Martin
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
-
gscott
- Posts: 250
- Joined: Thu Jan 10, 2013 9:25 pm
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Amazing detail! Future award-winners in-the-making!
- Greg
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Thank you, all. Most appreciated.
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
A quick update: All railings are now attached for Kenyo Maru. The next step is deck masking, and then hull painting. Here's to hoping that I can accomplish all that without crushing yet another thing.
- MartinJQuinn
- Posts: 8582
- Joined: Tue Jan 11, 2005 1:40 pm
- Location: New Jersey
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Nice update. They are really taking shape. Beautiful work, Dan.
Martin
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
- blacman
- Posts: 552
- Joined: Tue Aug 18, 2009 11:02 am
- Location: Poland, Wroclaw
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Yes...MartinJQuinn wrote:... Beautiful work, Dan.
- J.F.S.
- Posts: 154
- Joined: Mon Jan 24, 2005 8:53 am
- Location: Southern New Jersey
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Nice work Dan!
-
Joe Simon
- Posts: 827
- Joined: Sat Jan 24, 2009 5:16 pm
- Location: Wisconsin
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Those look awesome Dan!
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Jeez, another month passed? Kenyo Maru prepped & main coat paint. Naturally, no stage can pass without my destroying one item, necessitating a replacement fabrication.
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
01 level bridge supports in place & painted. It turns out that not all bridge posts were sized the same.
The light for photography was less than great this day. It's hard to make out the color differentiation between the decks and and the sides.
I'm shifting back to Kyokuto Maru to bring her up to the same level of construction. Let's see how long that takes.
The light for photography was less than great this day. It's hard to make out the color differentiation between the decks and and the sides.
I'm shifting back to Kyokuto Maru to bring her up to the same level of construction. Let's see how long that takes.
- PetrolGator
- Posts: 2353
- Joined: Fri Jun 22, 2012 12:02 pm
- Location: Herndon, VA
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Incredibly nice work, Dan.
- Chris
1/700 Saratoga w/Pontos (Needs paint)
1/700 Potato w/Kurama (On hold)
1/700 Murdertorpedoboat Ooi
1/700 Saratoga w/Pontos (Needs paint)
1/700 Potato w/Kurama (On hold)
1/700 Murdertorpedoboat Ooi
- MartinJQuinn
- Posts: 8582
- Joined: Tue Jan 11, 2005 1:40 pm
- Location: New Jersey
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
I find perverse satisfaction and comfort in this. If "The Master" can have a mishap, perhaps there is hope for us lesser mortals.Dan K wrote:JNaturally, no stage can pass without my destroying one item, necessitating a replacement fabrication.
Fantastic work Dan. Truly.
Martin
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne
Ship Model Gallery
-
marijn van gils
- Posts: 2738
- Joined: Tue Feb 06, 2007 10:24 am
- Location: Belgium
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
She's shaping up nicely!
Beautifull intricate detail!
Cheers,
Marijn
Beautifull intricate detail!
Cheers,
Marijn
- Devin
- Posts: 2503
- Joined: Mon Jan 10, 2005 10:46 am
- Location: Hoboken, NJ
- Contact:
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
Great work, as always. Lovely.
We like our history sanitized and theme-parked and self-congratulatory, not bloody and angry and unflattering. - Jonathan Yardley
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
The greatly encouragement is appreciated.
Take note that I am admitting to only ONE screwup per stage. "Master"? I wish.........JNaturally, no stage can pass without my destroying one item, necessitating a replacement fabrication.
I find perverse satisfaction and comfort in this. If "The Master" can have a mishap, perhaps there is hope for us lesser mortals.
-
Joe Simon
- Posts: 827
- Joined: Sat Jan 24, 2009 5:16 pm
- Location: Wisconsin
Re: Kawasaki class oil tankers in 1/700�Kenyo & Kyokuto Maru
This is your best work yet!
