Infini-model 1/350 USS Alaska Class Detail up set

[Infini-model]

Hi, all

Mr.Tracy White and Mr.Sean Hert sent us many high Resolution photos of USS Alaska CB-1 and USS Guam CB-2 related.
Mr. Park is finalizing 1/350 USS ALaska CB-1 Detail up set(Hobby Boss)and Mr. Jung is finilizing Wooden deck set for a/350 USS Alaska CB-1
So this is not took much time to be released.
The basr kit is New Hobby boss 1/350 USS Alaska CB-1 item no.86513

These sets will have contents as

1. Turned brass parts:
Almost possible turned brass parts will be included...
12inch 9 barrels, 5inch 12 barrels with 6 axis, 40mm Bofors 140 parts including 56 barrels, 20mm Oerlikons 34set(barrels with pedestals),
Brass masts yard arms, Jack & Ensign staff and etc...

2. Photo Etching parts
8sheets of full size PEs.

3. Resin.
9 of 12inch blastbags parts.

4. Anchor chains and etc...

5. Wooden deck.
Teak tone wooden deck with Masking sheet for Camouflage.
PE set for correction of steel deck part of fore and aft deck.


If you have any suggestion or advice, please feel free to tell us.

Here is Alaska class 5inch mout Mk.28












Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[Miguel]

Sounds very attractive , you got all my attention, hope to see the set soon.

[rotley]

There goes the budget again!

[Infini-model]

Sounds very attractive , you got all my attention, hope to see the set soon.

Dear Miguel

We will release Alaska detail up set as soon as possible.

Here is USN P6 type Catapult.















Thank you

Infini-model
G.K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[Infini-model]

There goes the budget again!

Dear rotley

Thank you for your interest in our USS Alaska Detail up set.

Here is deck winch.




Thank you

Infini-model
G.K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[Adaks]

Great news. My kit is waiting for this set.

[Angeliccypher]

Any idea on the price point? This is looking very good so far.

[Guest]

Any idea on the price point? This is looking very good so far.

It is irrelevant at this stage ,but if you want and idea,take a look of the Infini Missouri set price.

[W.H.min]

So you will still use that wrong 5''/38 cal. gunhouse?

[Angeliccypher]

Any idea on the price point? This is looking very good so far.

It is irrelevant at this stage ,but if you want and idea,take a look of the Infini Missouri set price.

Thank you for your opinion. I believe it relevant due to the fact that a competitor has a set they just released as and a number of other reasons. I will wait for Infini to answer if they choose.

[Infini-model]

Great news. My kit is waiting for this set.

Dear Asaks

Thank you for your interest in Infini Model products.
We will be working to make it available as soon as possible.

So you will still use that wrong 5''/38 cal. gunhouse?

Dear W.H.min

Yes that's right. If you remove only the rivet head on the roof of the turret,
the shape of the enclosure does not appear to be a critical error.

Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[Infini-model]

Thank you for your opinion. I believe it relevant due to the fact that a competitor has a set they just released as and a number of other reasons. I will wait for Infini to answer if they choose.

The price of the entire set has not yet been determined.
When the quantity of the whole components is confirmed, the price of the set will be fixed.
And since the retail price may vary from store to shop, the exact price
You can check it on the retailer site.

Here is USS Alaska's crane.

















Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[MartinJQuinn]

Those cranes are impressive - little models unto themselves.

[Infini-model]

Those cranes are impressive - little models unto themselves.

Dear Martin J Quinn

Thank you for your interest our Alaska set.
Korea was a long holiday from September 30th to October 9th.
We have resumed Alaska set work since yesterday.
Mr. Park completed the funnel today.



Correct the location of the wrong pipes in the kit.



Add catwalk.


Yard Arm




After Mast with SG radar


Search light platform




Ship's Whistles




Thank you
Regards,

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[W.H.min]

Great news. My kit is waiting for this set.

Dear Asaks

Thank you for your interest in Infini Model products.
We will be working to make it available as soon as possible.

So you will still use that wrong 5''/38 cal. gunhouse?

Dear W.H.min

Yes that's right. If you remove only the rivet head on the roof of the turret,
the shape of the enclosure does not appear to be a critical error.

Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

I think USS Alaska used MK.32 instead of MK.28.

[Infini-model]

Dear W.H.min

Yes that's right. If you remove only the rivet head on the roof of the turret,
the shape of the enclosure does not appear to be a critical error.

Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

I think USS Alaska used MK.32 instead of MK.28.

Dear W.H.min

I have no clear data on whether the 5-inch gun used in Alaska was Mk-28 or Mk-32.
The important thing is that the armor plate used for 5inch mounts is thick so that the rivet head does not pop up.
Thank you for informing us about 5inch mount in USS Alaska.
If your information is correct, we will change the name of the 5-inch gun on the picture.



Thanks,

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[W.H.min]

No, I don't mean you use the wrong name on that picture. Actually it is Trumpeter's foul, they moulded wrong 5''/38 cal. gunhouses, they look more like MK.28 than MK.32, even they are not exactly MK.28 because Trumpeter �added� a ringer finder window on its right wall. I do think a perfect Alaska detail up set may need some resin parts to replace these 5''/38 cal. gunhouses.

[Aop Aur]

Looking very nice!

Aop

[SH Park]

No, I don't mean you use the wrong name on that picture. Actually it is Trumpeter's foul, they moulded wrong 5''/38 cal. gunhouses, they look more like MK.28 than MK.32, even they are not exactly MK.28 because Trumpeter �added� a ringer finder window on its right wall. I do think a perfect Alaska detail up set may need some resin parts to replace these 5''/38 cal. gunhouses.

Dear W.H.min

I am Sang hyun Park, chief designer of Infini-model.
I now understand what you mean. I have compared 5inch gunhouse in hobbyboss kit with drawings and pictures of USS Alaska.
As you mentioned, it is certainly wrong to have two range finders on the right side of the 5inch gunhouse.
But it seems to be uneconomical to change the entire range because of the rangefinder problem.
Of course, if you want more precise detailing, it may be a good idea to replace it with a high quality resin product.



Regards,

S.H.Park

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com

[Infini-model]

Looking very nice!

Aop

Dear Aop Aur

Thanks for your interest our USS Alaska detail up set.

Here is Mk-37 & Mk-38 gun directors.



















Regrads,
Thank you

Infini model
G. K. Choi

E-mail : webmaster@infini-model.com
S I T E : http://www.infini-model.com